• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.550-555
• /
• 2000

Nonlinear oscillation of a microbubble under ultrasound was investigated theoretically. The bubble radius-time curves calculated by the Rayleigh-Plesset equation with a polytropic index and by the Keller-Miksis equation with the analytical solution for the Navier-Stokes equations of the gases were compared with the observed results by the light scattering method. This study has revealed that the bubble behavior such as the expansion ratio and the bouncing motion after the first collapse under ultrasound depends crucially on the retarded time of the bubble motion to the applied ultrasound.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.115-119
• /
• 2015

The power relay can be easily controlled with high voltage and current through the contacts. For this reason, has become widely used range in a variety of applications. In this study, we measured the contact resistance between the bouncing phenomenon of contact due to the change of load. The results of the experiment, the contact resistance increases with the deterioration of the contact, it is possible to predict the life of the relay contacts through the contact resistance. And relay bounce duration time have occurred in 3.5 ms or less. In addition, it is possible to use the results to design an arc suppression circuit device.

• 정보저장시스템학회논문집
• /
• 제7권2호
• /
• pp.65-69
• /
• 2011

Head Disk Interface (HDI) in a Hard Disk Drive (HDD) has decreased to achieve high areal density. Thus, the contact between a slider and a disk becomes more important. The contact between the slider and the disk can cause severe wear and damage of both the slider and the disk. Especially, Touch Down (TD) that the contact occurs continuously and repeatedly is extremely dangerous. Therefore, it is necessary to analyze the unstable bouncing vibration of the slider in head-disk interface. In this paper, we investigate the characteristic and causes of the Touch Down.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.205-209
• /
• 2017

고온으로 가열된 고체 표면 위를 타원형 액적이 충돌할 때, 구형 액적 충돌 거동과 다른 비축대칭적인 퍼짐 거동이 발생하여 반동 높이 조절이 가능하다고 보고되었다. 본 연구에서는 타원형 액적 종횡비가 퍼짐 거동에 미치는 영향을 조사하였다. 충돌 거동은 동기화된 두 대의 고속카메라를 이용하여 두 측면에서 관찰하였고, 액적의 장축과 단축에서의 액적 퍼짐 너비를 각각 조사함으로써 퍼짐 특성을 분석하였다. 실험 결과에서 종횡비가 클수록, 액적 단축의 최대 퍼짐 너비는 증가하는 데 반해, 액적 장축의 것은 큰 변화가 없는 것으로 나타나는 데, 이는 수축 과정에서 액적 정렬을 촉진하고 반동 억제에 중요한 역할을 한다. 본 연구에서는 추가적으로 액적 종횡비와 충돌 속도가 동시에 큰 영역에서 발생하는 반동 거동과 액적 분열 현상에 대하여 고찰하였다.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.616-624
• /
• 2014

대부분의 오븐 렌지는 위에서 아래로 여는 도어로 되어 있다. 오븐 렌지와 같이 열고 닫는 가전제품의 경우 도어의 감성이 제품 전체의 품질에 영향을 준다. 도어의 감성 품질을 평가하는 항목은 문을 열 때의 개방력, 문을 닫을 때의 폐쇄력, 문을 완전 개방하였을 때 발생하는 튕김 현상이 있다. 개방력과 폐쇄력이 크면 소비자의 불만 요소가 될 수 있고, 튕김 현상이 크면 소비자가 도어를 열었을 때 도어는 물론 몸체에도 충격이 가해져서 파손의 우려가 있다. 감성 품질을 향상시키기 위해서는 개방력, 폐쇄력, 튕김 현상을 최소화하여야 한다. 본 연구에서는 개방력, 폐쇄력, 튕김 현상을 최소화하기 위해 비선형 캠과 스프링을 이용하여 기존의 이중 압축 스프링과 캠 구조를 개선한 메커니즘을 제안하였다. 또한, 제안된 메커니즘을 위해 비선형 캠을 설계 및 제작한 후 실제 오븐 렌지에 적용하여 기존보다 감성 품질이 우수함을 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.105-109
• /
• 2008

A robust optimal control system design algorithm in active suspension equipment adopting linear matrix inequalities control system design theory is presented. The validity of the linear matrix inequalities robust control system design in active suspension system through the numerical examples is also investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.807-808
• /
• 2010

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.771-777
• /
• 2017

The applications of smartphones or other portable smart devices have dramatically changed people's lifestyle. Researchers have been investigating useage of smartphones for structural health monitoring, earthquake monitoring, vibration measurement and human posture recognition. Their results indicate a great potential of smartphones for measuring pedestrian-induced loads like walking, jumping and bouncing. Smartphone can catch the device's motion trail, which provides with a new method for pedestrain load measurement. Therefore, this study carried out a series of experiments to verify the application of the smartphone for measuring human-induced load. Shaking table tests were first conducted in order to compare the smartphones' measurements with the real input signals in both time and frequency domains. It is found that selected smartphones have a satisfied accuracy when measuring harmonic signals of low frequencies. Then, motion capture technology in conjunction with force plates were adopted in the second-stage experiment. The smartphone is used to record the acceleration of center-of-mass of a person. The human-induced loads are then reconstructed by a biomechanical model. Experimental results demonstrate that the loads measured by smartphone are good for bouncing and jumping, and reasonable for walking.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.858-864
• /
• 2017

This study aims to restrain free conducting wire-type particles which are commonly and dangerously existing within DC gas-insulated transmission lines. A realistic platform of a coaxial cylindrical electrode was established by using a high-speed camera and a partial discharge (PD) monitor to observe the motion, PD, and breakdown of these particles. The probabilities of standing or bouncing, which can be affected by the length of the particles, were also quantitatively examined. The corona images of the particles were recorded, and particle-triggered PD signals were monitored and extracted. Breakdown images were also obtained. The air-gap breakdown with the particles was subjected to mechanism analysis on the basis of stream theory. Results reveal that the lifting voltage of the wire particles is almost irrelevant to their length but is proportional to the square root of their radius. Short particles correspond to high bouncing probability. The intensity and frequency of PD and the micro-discharge gap increase as the length of the particles increases. The breakdown voltage decreases as the length of the particles decreases.

• 한국전산유체공학회지
• /
• 제4권1호
• /
• pp.1-7
• /
• 1999

The numerical methodology for computing tile impact forces and water entry behaviors of high speed water entry bodies was been developed. Since the present method assumed the impact occurs within a very short time interval. the viscous effects do not have enough time to play a significant role in the impact forces, that is, the flow around a water-entry object was assumed as an incompressible potential flow and is solved by the source panel method. The elements fully submerged into the water are routinely treated, but the elements intersected by the effective planar free surface are redefined and reorganized to be amenable to the source panel method. To validate the present code, it was applied to disk, cone and ogive model and compared with experimental data. Good agreement was obtained. The water entry behavior such as the bouncing phenomena from the free surface was also simulated using the impact forces and two degree of freedom dynamic equation. Physically acceptable results were obtained.