• 수산해양교육연구
• /
• 제19권3호
• /
• pp.491-501
• /
• 2007

This study deals with bottom debris and benthos which have obtained by using a beam trawler in Chinhae bay, Korea. The temperature and salinity didn't impact on the fish species and weights in the bay. But bottom debris is dominated on the precipitation into the bay. And it also was nearly very soiled owing to geographical condition of semi-enclosed bay. Moreover, all debris was not related on the quantitative variability of benthos. On the other hand, it was revealed to be reverse-correlative with fish species and positive-correlative with fish weights.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.111-120
• /
• 2021

During the core disruptive accident (CDA) of sodium-cooled fast reactor (SFR), the molten fuel and steel are solidified into debris particles, which form debris bed in the lower plenum. When the boiling occurs inside debris bed, the flow of coolant and vapor makes the debris particles relocated and the bed flattened, which called debris bed relocation. Because the thickness of debris bed has great influence on the cooling ability of fuel debris in low plenum, it's very necessary to evaluate the transient changes of the shape and thickness in relocation behavior for CDA simulation analysis. To simulate relocation behavior, a large number of debris bed relocation experiments were carried out by improved bottom gas-injection experimental method in this paper. The effects of different experimental factors on the relocation process were studied from the experiments. The experimental data were also used to further evaluate a semi-empirical onset model for predicting relocation.

• 수산해양교육연구
• /
• 제22권3호
• /
• pp.354-361
• /
• 2010

Author investigated the distribution of debris by a bottom trawler in the eight sea stations over the sea between Busan and Jeju island. 2,118 debris in number and 2,401.5kg in weight were collected. Most of collected debris were fishing gears which seemed to be lost or discarded during operations, and also most of the fishing gears was an eel pot. The densities of debris per hectare in number and weight were 1.21pieces and 2.639kg respectively. Station A was the highest densities compared to other stations, showing 2.7pisces and 4.9kg per hectare in number and weight. The closer to Busan it is, the higher density of debris can be collected.

• 한국전자통신학회논문지
• /
• 제11권5호
• /
• pp.539-544
• /
• 2016

본 연구의 목적은 해저 바닥에 침적된 쓰레기를 조사한 자료를 이용하여 공간적 분포 특성을 파악하는 것이다. 해양쓰레기는 부유쓰레기와 침적쓰레기로 구분할 수 있다. 부유 및 침적쓰레기는 해수면을 떠다니고 해저에 침적되어 해양환경과 해양생물, 서식지들을 오염시킨다. 또한 해양으로 유입된 쓰레기를 처리하는데 많은 비용이 소요된다. 본 연구에서는 동해의 대표적인 무역항인 포항항을 대상으로 2014년도에 사이드스캔소나로 해저에 침적된 쓰레기를 조사한 자료를 이용하였다. 해양침적쓰레기의 성상별 공간적 특성을 파악하기 위해 침적쓰레기의 위치와 단위면적당 무게 자료를 이용하여 침적 분포도를 작성하였다.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.191-197
• /
• 2003

As mechanical components are miniaturized, the demand on micro die and mold is increasing. Micro mechanical components usually have high hardness and good conductivity. So micro electrical discharge machining (MEDM) is an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of cavity is distorted. Electric charges tend to be concentrated at the sharp edge. At the center of the bottom surface, debris can not be drawn off easily. These two phenomena make the bottom surface of the electrode and workpiece distort. As machining depth increases, the distorted shape of electrode approaches hemisphere. This process is affected by capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.44-48
• /
• 2005

As mechanical components are miniaturized, the demands on micro die/mold are increasing. Micro mechanical components usually have high hardness and good conductivity. Micro electrical discharge machining (MEDM) can thus be an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of the cavity is distorted. Electric charges tend to be concentrated at the sharp edge, and debris cannot be drawn off easily at the center of the bottom surface. These two phenomena make the bottom surface of electrode and workpiece distort. As machining depth increases, the distorted shape of the electrode approaches hemisphere. This process is affected by both capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권4호
• /
• pp.91-98
• /
• 2000

본 연구는 남해안에 위치한 진해만의 바다 밑에서 수집한 쓰레기를 유형별로 분류하는 과정을 포함하고 있다. 1998년 2월부터 1999년 1월까지 저인망을 사용하여 총 11회의 수집 과정을 통하여 바다쓰레기를 수집하였다. 1회에 60-90분의 간격으로 바다밑 쓰레기를 채취하였으며 이를 8가지(플라스틱, 어구, 금속성 물질, 나무, 고무 혹은 피혁, 유리, 섬유 및 기타)의 형태로 분류하였으며 이를 통하여 8가지의 형태별로 분류된 쓰레기의 개수와 무게 그리고 분포 등의 결과를 얻게 되었다. 본 연구의 결과 조사지역의 단위면적(ha) 당 27.8개(총 1,612개), 3,130 g(총 193,820 g)의 바다쓰레기가 조사되었으며 이중 항목별 조성에 있어서 플라스틱류와 어구류의 구성비가 높았으며 무게별 조성에 있어서는 금속류와 어구류가 가장 높은 것으로 조사되었다.

• 산업기술연구
• /
• 제30권A호
• /
• pp.95-101
• /
• 2010

This paper is results of case study on characteristics of debris flow occurred at Jecheon during a heavy rainfall in 2009. The site studied is the mountain area located at Palsong-ri Bongyang-op in Jecheon-si where serious damages due to debris flow were occurred by heavy rainfall during July 7 to July 16 in 2009. Intensity and duration of rainfall causing debris flow were analyzed on the basis of AWS data. Characteristics of debris flow such as initiation, transportation and deposition were investigated through field reconnaissance. The geological and topographical characteristics of slope where debris flow was triggered were figured out and characteristics of erosion on the bottom and sides of valley during transportation of debris flow were also investigated. The slope and boundary of valley where the debris flow started to be deposited were studied.

• 한국지반공학회논문집
• /
• 제30권10호
• /
• pp.55-65
• /
• 2014

최근 토석류의 이동 메커니즘에 대한 연구와 거동 예측을 위한 해석 프로그램의 개발이 활발히 진행중이다. 하지만, 토석류를 유체이동으로 간주하는 기존의 프로그램들은 수치적인 안정성과 모델링 그리고 다양한 경계조건의 적용에 대한 제약이 있다. 본 연구에서는 토석류의 유동현상에 대한 연속방정식과 힘평형 방정식에 대하여 깊이적분을 수행하였다. 토체의 두께 h, x와 y 흐름방향의 평균속도 $\bar{u}$, $\bar{v}$를 주변수로 채택하여 흐름이 없는 해석영역에 대한 수치적인 안정성을 확보하였다. DG기법에 의한 가중행렬을 산정하고 유동방향을 고려한 불연속 시험함수를 이용하여 Petrov-Galerkin 수식화를 수행하였다. 그리고 토석류의 유체 및 토립자의 특성을 동시에 고려할 수 있는 역학적 구성모델을 제시하였다. 단일경사 사면에서 사면경사, 토사 유발량, 저면 마찰 저항이 토석류 흐름특성에 미치는 영향을 비교 분석하였다. 그리고 수치해석을 통하여 사면 하부에 설치된 제방의 영향을 분석하였다. 개발된 해석프로그램을 활용하여 토석류 발생예상 지역의 다양한 위험인자에 대한 평가를 수행하고, 피해를 최소화하기 위한 시설물의 설계방안을 제안할 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.457-469
• /
• 2016

During the late phase of severe accidents of light water reactors, a porous debris bed is expected to develop on the bottom of the flooded reactor cavity after breakup of the melt in water. The geometrical configuration, i.e., internal and external characteristics, of the debris bed is significant for the adequate assessment of the coolability of the relocated corium. The internal structure of a debris bed was investigated experimentally using the DAVINCI (Debris bed research Apparatus for Validation of the bubble-Induced Natural Convection effect Issue) test facility. Particle sedimentation under the influence of a two-phase natural convection flow due to the decay heat in the debris bed was simulated by dropping various sizes of particles into a water vessel with air bubble injection from the bottom. Settled particles were collected and sieved to obtain the particle mass, size distribution in the radial and axial positions, and the bed porosity and permeability. The experimental results showed that the center part of the particle bed tended to have larger particles than the peripheral area. For the axial distribution, the lower layer had a higher fraction of larger particles. As the sedimentation progressed, the size distribution in the upper layers can shift to larger sizes because of the higher vapor generation rate and stronger flow intensity.