• 제목/요약/키워드: Both sides Complex

검색결과 46건 처리시간 0.031초

Stellar Content of the Massive Young Open Cluster Westerlund 2

  • Hur, Hyeonoh;Park, Byeong-Gon;Sung, Hwankyung;Lim, Beomdu;Chun, Moo-Young;Bessell, Michael S.;Sohn, Sangmo Tony
    • 천문학회보
    • /
    • 제39권1호
    • /
    • pp.84.1-84.1
    • /
    • 2014
  • We report the spatial distribution of early-type stars and pre-main-sequence (PMS) stars around the starburst type young open cluster Westerlund 2. The early-type were selected from UBVI photometric data, while the PMS members were identified from their X-ray emission and mid-infrared excess. The northern clump of the cluster is composed mainly of PMS stars detected in both optical and X-ray and seems to be coeval to the cluster, while PMS stars in the bright bridge region are highly obscured in optical wavelength. The bright bridge appear to be an on-going star forming region possibly triggered by the strong radiation field from both sides-massive stars in Westerlund 2 and WR 20b. We also found that there are many early-type stars not only in the cluster but also farther from the cluster up to several times of the cluster radius. These early-type stars are well aligned from east to southwest of the cluster. We conclude these early-type stars are members of an OB association in the RCW 49 nebula. This report indicates there is a complex star formation history in Westerlund 2 and its surrounding H II region, the RCW 49 nebula.

  • PDF

한강 이촌-반포 만곡부의 편수위 연구 (Study of Superelevation of Ichon-Banpo Bend Flow in the Han River)

  • 이정규;김주영;박현진;강지예
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.810-814
    • /
    • 2009
  • Two dimensional steady and unsteady numerical models are applied to bend reaches of the Lower Han River and the superelevation at the Ichon-Banpo bend area of Han River was observed. The flow characteristics in the meandering river are complicated due to the effects of the centrifugal force. The centrifugal force makes the outside water surface level increase and the outside velocity decrease. To study this complex flow studying two dimensional flow is important and useful to design flood control countermeasures, the analysis of sedimentation and the site selection of intake structures. Especially, the superelevation between inside and outside of the bend should be considered to determine the height of embankment. In this study, the water surface elevations in both bank sides of the bend were measured in two reaches during floods in 2007 and 2008. And then the two-dimensional simulation using RMA-2 model was carried out. The upstream and downstream boundary conditions on bend reaches were determined by FLDWAV which is one-dimensional unsteady model. Finally, the observed data are compared with simulation results and the results of the several superelevation formulas, and the flow characteristics of the bend are discussed.

  • PDF

UV-LIGA 표면 미세 가공 기술과 (110) 실리콘 몸체 미세 가공 기술을 이용한 큰 종횡비의 빗모양 구동기 제작에 관한 연구 (A HIGH-ASPECT-RADIO COME ACTUATOR USING UV-LIGA SURFACE MICROMACHINING AND (110) SILICON BULK MICORMACHINING)

  • 김성혁;이상훈;김용권
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제49권2호
    • /
    • pp.132-139
    • /
    • 2000
  • This paper reports a novel micromachining process based on UV-LIGA process and (110) silicon anisotropic etching for fabrication of a high-aspect-ratio comb actuator. The comb electrodes are fabricated by (110) SILICON comb structure considering the etch-rate-ratio between (110) and (111) planes and lateral etch rate of a beam-type structure. The fabricated structure was$ 400\mum \; thick\; and\; 18\mum$ wide comb electrodes separated by $7\mim$ so that the height-gap ratio was about 57. Also considering resonant frequency of the comb actuator and the frequency-matching between sensing and driving mode for gyroscope application, we designed the number, width, height and length of the spring structures. Electroplated gold springs on both sides of the seismic mass were $15\mum\; wide,\; 14\mum\; thick\; and \; 500\mum$ long. The fabricated comb actuator had resonant frequency ay 1430Hz, which was calculated to be 1441Hz. The proposed fabrication process can be applicable to the fabrication of a high-aspect-ratio comb actuator for a large displacement actuator and precision sensors. Moreover, this combined process enables to fabricate a more complex structure which cannot be fabricate only by surface or bulk micromachining.

  • PDF

Distribution and phenotypes of hemifacial microsomia and its association with other anomalies

  • Yang, Il-Hyung;Chung, Jee Hyeok;Yim, Sunjin;Cho, Il-Sik;Lim, Seung-Weon;Kim, Kikap;Kim, Sukwha;Choi, Jin-Young;Lee, Jong-Ho;Kim, Myung-Ji;Baek, Seung-Hak
    • 대한치과교정학회지
    • /
    • 제50권1호
    • /
    • pp.33-41
    • /
    • 2020
  • Objective: To investigate the distribution and phenotypes of hemifacial microsomia (HFM) and its association with other anomalies. Methods: This study included 249 Korean patients with HFM, whose charts, photographs, radiographs, and/or computed tomography scans acquired during 1998-2018 were available from Seoul National University Hospital and Dental Hospital. Prevalence according to sex, side involvement, degree of mandibular deformity, compensatory growth of the mandibular body, and Angle's classification, and its association with other anomalies were statistically analyzed. Results: Prevalence was not different between male and female patients (55.0% vs. 45.0%, p > 0.05). Unilateral HFM (UHFM) was more prevalent than bilateral HFM (BHFM) (86.3% vs. 13.7%, p < 0.001). Although distribution of the Pruzansky-Kaban types differed significantly in patients with UHFM (I, 53.0%; IIa, 18.6%; IIb, 24.7%; III, 3.7%; p < 0.001), no difference was observed in occurrence between the right and left sides (52.6% vs. 47.4%, p > 0.05). Among patients with BHFM, prevalence of different Pruzansky-Kaban types on the right and left sides was greater than that of the same type on both sides (67.6% vs. 32.4%, p < 0.05). Despite hypoplasia of the condyle/ramus complex, compensatory growth of the mandibular body on the ipsilateral side occurred in 35 patients (14.1%). Class I and II molar relationships were more prevalent than Class III molar relationships (93.2% vs. 6.8%, p < 0.001). Forty-eight patients (19.3%) had other anomalies, with 50.0% and 14.4% in the BHFM and UHFM groups (p < 0.001). Conclusions: Patients with HFM require individualized diagnosis and treatment planning because of diverse phenotypes and associations with other anomalies.

서해연안 접경지역 현황 및 남북한 협력관리 방안 (Cooperative Management Framework for the Transboundary Coastal Area in the Western Part of Korean Peninsula)

  • 남정호;강대석
    • 환경정책연구
    • /
    • 제3권2호
    • /
    • pp.1-29
    • /
    • 2004
  • As a result of very limited access due to the military confrontation between South and North Koreas for the last five decades, ecosystems in the transboundary coastal area in the western part of Korean Peninsula have been protected from intensive developments in both Koreas. In the core of the recent two military collisions lies the fishery resources represented as blue crabs as well as the politico-military aspect. Increasing development pressures from both sides as reflected in the South Korea supporting the construction of an industrial complex in Kaesung, North Korea, is the main factor which threatens the sustainable resource base in this region. This research is aimed to develop a cooperative management system for the well-preserved transboundary coastal area between South Korea and North Korea. The Pressure-State-Response (PSR) framework of OECD was used to assess environmental conditions, socioeconomic pressures on the environment of the region, and policy responses of both Koreas to those pressures. Protection of ecosystems, peace settlement, and prosperity of the region and the entire peninsula were proposed as the management goals of the cooperative management system. The designation of the area as a Co-managed Marine Protected Area System (COMPAS) through close cooperation among South Korea, North Korea, and international entities was suggested as a way to achieve those goals. Revision of legal and institutional mechanisms, strengthening knowledge base for optimal COMPAS management, integration of the marine protected area and DMZ (demilitarized zone) ecosystem, enhancing stakeholder participation, building international partnership, and securing financial resources were presented as six management strategies.

  • PDF

Evaluation of soft tissue asymmetry using cone-beam computed tomography after open reduction and internal fixation of zygomaticomaxillary complex fracture

  • Kim, Dong Hyuck;Kim, Rae Hyong;Lee, Jun;Chee, Young Deok;Kwon, Kyoung-Hwan
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제40권3호
    • /
    • pp.103-110
    • /
    • 2014
  • Objectives: In this study, we assessed soft tissue asymmetry that occurred after open reduction of unilateral zygomaticomaxillary complex (ZMC) fractures. We proposed a simple method to assess soft tissue asymmetry after reduction surgery by evaluating the symmetry between the affected and the unaffected sides. The factors affecting soft tissue contour after surgery were also analyzed. Materials and Methods: Subjects included patients admitted to Wonkwang University Dental Hospital from 2008 to 2013. Cone-beam computed tomography (CBCT) images of asymmetric patients who underwent open reduction at least 3 months prior were compared with healthy patients. Results: The degree of asymmetry was measured in both the open reduction and control groups. Landmarks that showed a statistically significant difference between the two groups were zygion ($1.73{\pm}0.24mm$), bucclae ($1.08{\pm}0.26mm$), point of cheek ($2.05{\pm}0.33mm$) and frontozygomatic point ($1.30{\pm}0.31mm$). Conclusion: When compared with the normal group, asymmetry can occur in the affected side, which usually shows depression of overlying soft tissue and is statistically significantly different. Evaluation of soft tissue asymmetry with CBCT images after open reduction of ZMC fracture is useful.

홍천 가리산 선도산림경영단지의 목재생산 잠재량 분석 (Analysis of the Timber Harvesting Potential of the Garisan Leading Forest Management Complex in Hongcheon)

  • 김영환;이동호;조민재;박진우
    • 한국산림과학회지
    • /
    • 제112권4호
    • /
    • pp.523-529
    • /
    • 2023
  • 본 연구에서는 홍천 가리산 국유림 선도산림경영단지를 대상으로 목재생산 가능면적과 목재생산 잠재량을 분석하고, 지속가능한 목재수확을 위한 최적 목표수확량을 제시하고자 하였다. 목재생산 가능면적을 분석하기 위해서 공간분석을 통해 경사도 40° 이상인 지역(지형적 제약조건), 수계 양안 30 m 이내 지역(환경적 제약조건), 임도로부터 300 m 이상 떨어진 지역(기술적 제약조건)을 제외하여 분석한 결과, 전체 단지 면적 6,679 ha 가운데 3,298 ha (49%)가 목재생산 가능 면적으로 분석되었다. 목재생산 가능면적을 대상으로 목재생산 잠재량을 분석한 결과 608,613 m3으로 나타났으며, 특히 침엽수 인공림의 목재생산 잠재량이 409,721 m3으로 67.3%를 차지하여 매우 높았다. 향후 50년간 일정한 목재수확량을 유지하면서 영급 간 면적의 편차를 최소화할 수 있도록 최적화 분석을 실시한 결과, 연 평균 41.9 ha, 7,988 m3가 최적의 목재 수확량으로 나타났으며, 이 경우 50년 후의 영급구조가 보다 안정적인 형태로 전환이 가능한 것으로 나타났다.

지역 및 도시계획에서의 환경영향평가 (Environmental Impact Assessment within Regional and Municipal Planning)

  • Socher, Wolfgang
    • 환경영향평가
    • /
    • 제4권3호
    • /
    • pp.27-29
    • /
    • 1995
  • Within regional and municipal planning we are using several levels or types of EIA in the city of Dresden. Some of these types, practical aspects and some experiences of our work will be presented in this contribution. Firstly I may introduce you to some general conditions for your better understanding of our principles of work. Surely you know about. the destruction of the political and economical structures in Eastern Germany since 1989. Until today our not quite simple task is to build up new ones. At the same time people were in great expectation of freedom and high standard of living as soon as possible. Economical difficulties increased in association with the breakdown of the market in Eastern Europe. How to rebuild industrial estatements and how to renew the traffic systems? We had to find answers to all these complex question. Should we only repair the former damages or could we reach a really environmental sound production for the future? The demand for a rapid economic growth is an incredible challenge for the application of new environmental ideas. I am truly not sure whether you know the city of Dresden or not. So I would like to give you a short introduction. Dresden is situated in a valley shaped by the river Elbe. There live about 500,000 people. Dresden has a great reputation for arts and sciences. Its also well know as a town of high technology industries such as electronics and optics. We restored the power plant and therefore we don't need any atomic power plants actually we haven't got one. Since 1990 there were founded many official agencies in Dresden because it is the capatal of Saxony. Considering nature and environment we there is a large forest area called "Dresdner Heide". The river Elbe and the meadows are situated on both sides of the river. There are a lot of green and free places in the city area too. Furtheron there is something unusual for a large city: about 50% of the drinking water resources mostly take place within the city itself. The origin is the ground water as well as water from the river Elbe after filtration of course.

  • PDF

한국(韓國) 근대기(近代期) 내륙지방(內陸地方) 도시주택(都市住宅)의 유형(類型)과 변천(變遷)에 관한 연구(硏究) (A Study on the Types and Changes of the Urban Houses in the Korean Inland during the Period 1910-1945)

  • 김태영
    • 건축역사연구
    • /
    • 제7권3호
    • /
    • pp.53-66
    • /
    • 1998
  • In the meantime, the study of traditional and contemporary house had been produced so many achievements in korea, but modern house is yet to be solved, Accordingly, It is necessary to develop and present the basic research data in order to build up an objective study for urban house in the modern age(1910-1945), Following to a study on the foreigner's house in grid-type settlement of Open Ports, in this research is to investigate and analyze modern houses of urban areas in korean inland, and then clarify types and changes of them. In the first year($1995{\sim}96$), the modern houses of Central Inland Districts(arrounding river Kumgang)-Kunsan kanggyong Puyo Kongju Pugang Chongju were investigated by the layout of room, the construction and materials, the design and style, etc. In the second year($1996{\sim}97$), the modern houses of Open Market(開市場)-Seoul Taegu Kwangju Taejon Chonju were conducted to investigate as above. The traditional house transformed by differentiation and addition of room(kan), the various types were respectively adopted for the korean reforming and western cultural house. In the layout of room, the types of plan were gradually concentrated from the single wings of korean traditional house. The korean traditional house was later improved through the introduction of entrance, corridor, and internal toilet/bathroom. But the korean under-floor heating system(andal) and a series of three rooms had been entirely maintained, composed of master bedroom/living room(daechung)/room. And the traditional town house with shop and storage, being built closely to each other and walled up both sides, it had taken gradually the extensive characteristics in itself. By the displacement of shop/dwelling/ storage. the various types were respectively adopted for the separated, multi-storied, and complex type. The type of them was gradually changed to the narrow and linear form. And so with the stockpile of fundamental datas about modern houses in korean urban areas, we expect these results contribute to the knowledge of the spatial characteristics of urban house at present which are required to the understanding of transition as well as types.

  • PDF

The Effect of Neuromuscular Electrical Stimulation on Pulmonary Function, Gait Ability, and Quality of Life in Patients with Chronic Obstructive Pulmonary Disease

  • Kang, Jeong-il;Park, Jun-Su;Jeong, Dae-Keun
    • The Journal of Korean Physical Therapy
    • /
    • 제30권4호
    • /
    • pp.129-134
    • /
    • 2018
  • Purpose: This study aims to investigate the changes in pulmonary function, gait ability, and quality of life when NMES is applied along with CBE and to provide basic clinical data to be used in pulmonary rehabilitation guidelines for patients with COPD to treat patients with severe COPD. Methods: For this study, CBE and NMES of quadriceps femoris on both sides were applied to the experimental group (n=10), and only CBE was applied to the control group (n=10). For a pre-test, a 6-minute walk test was performed, and pulmonary function and health-related quality of life were measured. Moreover, an exercise program was applied to each group for 30 minutes per session, 5 times a week, for 6 weeks. After that, a post-test was conducted the same way as the pre-test. Results: In the within-group comparison, there were significant differences in forced expiratory volume in one second, 6-minute walk test and health-related quality of life between the experimental group and the control group (p<0.01)(p<0.05). In the between-group comparison, the experimental group showed an increase in forced expiratory volume in one second and 6-minute walk test (p<0.05) and showed a decline in health-related quality of life (p<0.05). Conclusion: The 6-weeks NMES program improved health-related quality in patients with severe COPD by increasing expiratory volume by reinforcing the function of quadriceps femoris. This finding implies that NMES could be an alternative mode for improving physical functions of patients with severe COPD, who cannot participate in a breathing exercise program or are reluctant to participate.