• Korean Journal of Plant Taxonomy
• /
• v.51 no.3
• /
• pp.326-331
• /
• 2021

The complete chloroplast genome of Zoysia macrostachya Franch. & Sav. isolated in Korea is 135,902 bp long (GC ratio is 38.4%) and has four subregions; 81,546 bp of large single-copy (36.3%) and 12,586 bp of small single-copy (32.7%) regions are separated by 20,885 bp of inverted repeat (44.1%) regions, including 130 genes (83 protein-coding genes, eight rRNAs, and 39 tRNAs). Thirty-nine single nucleotide polymorphisms and 11 insertions and deletion (INDEL) regions were identified from two Z. macrostachya chloroplast genomes, the smallest among other Zoysia species. Phylogenetic trees show that two Z. macrostachya chloroplast genomes are clustered into a single clade. However, we found some incongruency with regard to the phylogenetic position of the Z. macrostachya clade. Our chloroplast genome provides insights into intraspecific variations and species delimitation issues pertaining to the Zoysia species.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.32-32
• /
• 2018

Flora investigations in Korea have been conducted by many researchers for diverse purposes. Accumulated flora investigation data has not been utilized efficiently because there is no accessible database for comparison. To overcome this shortcoming, we constructed web-based database of flora investigation, named as the Integrated Korean Flora Database (IKFD; http://www.floradb.net/intro.php). Until now, 284 flora references (263 papers, 14 reports and books, and 7 unpublished papers written in between 1962 and 2017) were digitalized into the database. From 134,711 records, 4,301 species belonging to 228 families and 1,079 genera were identified via mapping with two major Korean plant species lists. Polygon areas originated from references were used for distribution of plant species, identifying precise distribution area. It will be a better index to show plant ecological characteristics. Collected micro-climate data provided by Korea Meteorology Administration were also integrated in IFKD for understanding correlation between distribution of plants and micro-climate. Cold hardiness zone which has been utilized for classifying climate zones. 12 out of 26 zones identified based on micro-climate data in Korea were mapped with distribution of plants. More than half species were appeared in zone 6a, 6b, 7a, and 7b. Taken together with these results, IKFD will be a fundamental platform for understanding plants in Korea flora investigation as well as a new standard for classifying distribution of plants. Moreover, Biodiversity Observation Database (BODB; http://www.biodiversitydb.info/intro.php) which integrates plant distribution data was also integrated for further studies.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.617-629
• /
• 2016

The purpose of this study was to evaluate effects of the confirmed of boss and the organizational effectiveness. For this, The mediating effect of psychological empowerment was verified. on the Influence of Organizational Effectiveness. the confirmed of boss (+)effected of the organizational effectivenes and verified the parameter part of psychological empowerment. Also The confirmed of boss (+)effected of a Junior staff's the job satisfaction and the organizational commitment. This results suggest that for maximization the organizational effectiveness need the confirmed of boss and the delegation of authority. The delegation of authority from boss provide autonomy and creativeity to Junior staffs. This ways suggest that make them the job satisfaction and the organizational commitment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.409-410
• /
• 2002

In order to measure the oil-film pressure in sliding surface of machinery, we have developed a piezo-resistive type thin-film pressure sensor. To reduce the measurement error due to temperature and strain, the constituent of the pressure sensitive alloy was optimized and a new sensor shape was devised. In this study, we present the measurement results of the oil-film pressure distribution in engine connecting rod big-end bearing and piston pin- bosses with 3 different pin-boss shapes using the newly developed thin-film pressure sensor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.496-500
• /
• 2001

When we cut a key way on the axial or on the boss, we generally use a slotter or a broach. To do the key seating, turing operations have to be preceded and then the key on the axial or on the boss can be seated. For this reason, the production process of key way cutting becomes complicated. If is necessary to simplify the process and we have developed a small practical machine for key way cutting. The machine is located on the carriage of the lathe. Using this small and practical key way machine, after operation the turing, you do not have to remove the workpiece from the chuck of the lathe to carry on the key seating process. The developed machine will save cutting time and the cost.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.333-338
• /
• 2000

This paper presents an experimental study and numerical thermal deformation analysis in the home appliance, Video Cassette Recorder. Analyzing the change axial force of a set screw according to the change of temperature in the drum assembly, we can determine the initial torque in tightening set screw. The torque will have the preload boss not be separated from the bearing. Also we conduct the fundamental experiment to constitute a boundary condition of the numerical analysis. With the result of this study, we can change the material of preload boss, copper, for aluminum.

• 연구논문집
• /
• s.25
• /
• pp.155-161
• /
• 1995

During casting of A390 billet by Hot Top process, bosses were formed on the surface of cast bar. The formation of boss is assumed due to a large amount of latent heat released during the formation of primary Si in A390 alloy. The low melting point elements around primary Si are locally remelted to liquid and interdendrite offers a path by which the liquid can pass through to the surface. Addition of Sr decreases the amount of latent heat by preventing the formation of primary Si near the surface and thus suppresses the formation of boss on the surface of cast bar. Therefore, the formation of boss could be reduced remarkably when the casting condition was selected to extract the latent heat outward easily.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.53-56
• /
• 2007

Magnesium sheet used in electrical device due to mobility and EMF shielding characteristics. Magnesium case by press forming was advantageous compare with conventional die casting process, because of its thin gauge of wall and surface quality. But it need to makes the boss to fix inner part or assemble the case. CD stud welding was effective way for joining the boss to the thin gauge case of the electrical devices. In this study, we investigated the performances of the magnesium boss welder To measure the process parameters such as the force and the weld current, we design the monitoring system for CD stud welding. We test the characteristics of CD stud welding for AZ31 sheets at some variables. Finally we select the optimum welding range of magnesium sheets in CD stud welding process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.71-77
• /
• 2001

We have developed the exclusive CAD/CAM system for the machining of impeller blades. This study is about the mod-eling method for the effective machining of impeller blades farmed by ruled surface. As the impeller is consisted of boss part and blade part, the boss is modeled by rotational surface of hub curve on z-axis and the blade is described by ruled- surfaces between hub curve and shroud curve. This modeling process can be carried out on the software developed in this study. And, the developed software can describe the impeller as a solid model through interface with Solid-Works soul- ware. The developed software containing the interface method proposed in this study was very effective fur impeller modeling.

• Archives of Plastic Surgery
• /
• v.32 no.5
• /
• pp.667-670
• /
• 2005

Congenital facial cleft is a rare entity and appears along by the line of different processes of the facial development. An isolated cleft of the nose has been reported not often in the literature. We treated a patient with an isolated nasal cleft associated with undefined cranial anomaly. On 3D CT scan was seen a bony cleft traversing the pyriform aperture lateral to the anterior nasal spine. The nasal septum and frontal process of the maxilla were intact. There also was found bilateral bony defects in the frontal bone and bilateral frontal boss. The nasal cleft and frontal defect and boss were corrected by two stages: anterior two-third of the cranial vault with bilateral frontal boss was remodeled at the age of two years and the nasal cleft was repaired with a local rotation flap at age 3.