• Coupled systems mechanics
• /
• v.11 no.6
• /
• pp.505-524
• /
• 2022

Floods represent extreme hydrological phenomena that affect populations, environment, social, political, and ecological systems. After the catastrophic floods that have hit Europe and the World in recent decades, the flood problem has become more current. At the EU level, a legal framework has been put in place with the entry into force of Directive 2007/60/EC on Flood Risk Assessment and Management (Flood Directive). Two years after the entry into force of the Floods Directive, Bosnia and Herzegovina (B&H), has adopted a Regulation on the types and content of water protection plans, which takes key steps and activities under the Floods Directive. The "Methodology for developing flood hazard and risk maps" (Methodology) was developed for the territory of Bosnia and Herzegovina, following the methodology used in the majority of EU member states, but with certain modifications to the country's characteristics. Accordingly, activities for the preparation of the Preliminary Flood Risk Assessment for each river basin district were completed in 2015 for the territory of Bosnia and Herzegovina. Activities on the production of hazard maps and flood risk maps are in progress. The results of probable climate change impact model forecasts should be included in the preparation of the Flood Risk Management Plans, which is the subsequent phase of implementing the Flood Directive. By the foregoing, the paper will give an example of the development of the hydrodynamic model of the Zujevina River, as well as the development of hazard and risk maps. Hazard and risk maps have been prepared for medium probability floods of 1/100 as well as for high probability floods of 1/20. The results of LiDAR (Light Detection and Ranging) recording were used to create a digital terrain model (DMR). It was noticed that there are big differences between the flood maps obtained by recording LiDAR techniques in relation to the previous flood maps obtained using georeferenced topographic maps. Particular attention is given to explaining the Methodology applied in Bosnia and Herzegovina.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.3
• /
• pp.170-178
• /
• 2019

Objectives: To determine the epidemiological features of patients and animals after bites/scratches from rabies-suspected animals in Zenica-Doboj Canton, Bosnia and Herzegovina. Methods: Data from all patients (and the causative animals) admitted to the Antirabies Service of the Institute for Health and Food Safety Zenica in the 2009-2017 period were analyzed, including age, sex, anatomical site of the bite/scratch, animal type (stray/owned/wildlife), veterinary observations of the animal, and whether antirabies post-exposure prophylaxis (PEP) was indicated and/or administered. Results: In total, 1716 patients were admitted. Bites/scratches were most frequently recorded during April and May (n=181, 10.5% and n=163, 9.5%, respectively). The persons admitted were mostly from the Zenica municipality (n=1278, 74.5%; incidence: 11.55/1000), which is 66.6% urbanized. Males were more frequently represented (n=1089, 63.6%). The patients were mostly 50-64 and 25-49 years of age (n=425, 24.7% and n=390, 22.7%, respectively). Dog bites were the most common cause (n=1634, 95.1%, of which n=1258, 77.0% were caused by stray dogs). PEP was indicated for 997 (58.1%) patients. Only 340 (19.9%) animals underwent veterinary observations (3.1% of stray and 76.1% of owned animals). The largest number of injuries were presented at lower extremities, 1044 (60.8%) cases. Conclusions: Zenica-Doboj Canton is a rabies-free region. Due to the high rate of stray animals not undergoing veterinary observations, the non-existence of a unique dog registry, and the consequent lack of information about stray animals in terms of number, vaccination, neutering, and euthanasia, there is an urgent need for improving the prevention and control of rabies within the One Health framework.

• Coupled systems mechanics
• /
• v.11 no.2
• /
• pp.121-132
• /
• 2022

Wastewater treatment plants (WWTPs) are designed and built to remove contaminants from wastewater. WWTPs are composed of various facilities equipped with hydro-mechanical and electrical equipment. This paper presents a comparison of two different approaches for WWTPs modelling. Static modelling is suitable for determining the dimensions of facilities and equipment capacity. The special significance of this approach is for the design of new plants, i.e., when a very small number of input data on the quantities and composition of the influent wastewater is available. Dynamic modelling is expensive, time consuming and requires great expertise in the use of simulators, models and very good understanding of the treatment processes. Also, dynamic modelling is very important to use for optimization, consideration of future scenarios and also possible scenarios on the plant. The comparison of two approaches was made on the input data from the biggest and most important plant in Bosnia and Herzegovina (B&H)-WWTP Butila (Sarajevo). The main idea is to show the differences between two demanding accesses. It is important to know how to apply an adequate approach to research and solve the set task. The II phase of the plant Butila, which includes the removal of nutrients, is planned in several years and therefore the importance of research has increased.

• Journal of Distribution Science
• /
• v.12 no.9
• /
• pp.25-38
• /
• 2014

Purpose - Our study aims to analyze and assess aeronautics transport, to bring comprehensive insight about the existing potential in the new member states, candidate countries, potential candidate countries, and associated states. Methodology - The evaluation was carried out by applying qualitative methodology to the research results and on existing capabilities, to assess the overall research capability in the aeronautics transport mode of each country and region, in the European context. Results - Overall, countries with the strongest potential are the Czech Republic, Poland, Hungary, and Romania. The aeronautics research potential was evaluated as weak in as many as 11 countries, with Estonia, Bosnia-Herzegovina, Macedonia, Montenegro, Albania, and Moldova being evaluated as weak in all categories, and Latvia, Croatia, and Serbia being evaluated as weak overall but having at least one category evaluated as medium. Conclusion - Based on the research findings, there are recommendations regarding both the research policy and research activities related to the aeronautics transport mode. The findings contribute to the further development of EU aeronautics research and the aviation industry.

• Korean Journal of Remote Sensing
• /
• v.37 no.1
• /
• pp.139-151
• /
• 2021

By the end of December 2020, an earthquake with Mw about 6.4 hit Sisak-Moslavina County, Croatia. The town of Petrinja was the most affected region with major power outage and many buildings collapsed. The damage also affected neighbor countries such as Bosnia and Herzegovina and Slovenia. As a light of this devastating event, a deformation map due to this earthquake could be generated by using remote sensing imagery from Sentinel-1 SAR data. InSAR could be used as deformation map but still affected with noise factor that could problematize the exact deformation value for further research. Thus in this study, 17 SAR data from Sentinel-1 satellite is used in order to generate the multi-temporal interferometry utilize Stanford Method for Persistent Scatterers (StaMPS). Mean deformation map that has been compensated from error factors such as atmospheric, topographic, temporal, and baseline errors are generated. Okada model then applied to the mean deformation result to generate the modeled earthquake, resulting the deformation is mostly dominated by strike-slip with 3 meter deformation as right lateral strike-slip. The Okada sources are having 11.63 km in length, 2.45 km in width, and 5.46 km in depth with the dip angle are about 84.47° and strike angle are about 142.88° from the north direction. The results from this modeling can be used as learning material to understand the seismic activity in the latest 2020 Petrinja, Croatia Earthquake.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.59-71
• /
• 2006

This study contemplates Croatian traditional costumes with focus on its geographical characteristics and acculturation with neighbor countries as a member of old Yugoslavian Union. Therefore, it contains the information from field works based on Croatian language, native costumes and folk materials wildly. Men usually wear wide linen pants ($ga\'{c}$), shirt ($ko\v{s}ulje,\;rnbina)$, vest (lajbek), hat and jacket ($kro\v{z}et$). Also they sometimes wear scarves or aprons. Women put on blouse, long skirt, apron, headgear with various decoration and scarf ($pe\v{c}a$), shawl (tibetui robe) or necklace together. Croatian folk dresses fall into three different styles by provinces, such as Pannonia, Dinar and Adria, according to the basic environmental and racial characteristics of each province. People of Pannonia plain generally wear white linen clothing and often use flounce and lace, which are influenced by Serbia and Hungary. In the Dinar mountain province, aprons with tassel, knitted vests made of leather and fur are very popular. The clothing of Dinar province has much commonness with those of Bosnia - Herzegovina and Montenegro which have metal buttons and belts. And the clothing of Adria coast is influenced by Italy a lot. There are many splendid silk clothes in its folk dress code. As mentioned above, there are a lot of foreign influences in Croatian history. Although there were severe cultural invasions in many times through its history, Croatians didn't just surrender to these cultural influences. People in Croatia comply with these new coming culture and reconcile these into their own tradition and dress code in their own way.

• Advances in concrete construction
• /
• v.10 no.6
• /
• pp.547-557
• /
• 2020

This paper presents one of the demonstration projects undertaken during the FP7 EU-funded Anagennisi project (Innovative reuse of all tyre components in concrete-2014-2017) on a full-scale (30 m×40 m, thickness: 0.2 m) Steel Fibre Reinforced Concrete (SFRC) slab-on-grade using a blend of manufactured steel fibres (MSF) and Recycled Tyre Steel Fibres (RTSF). The aim of the project was to assess the use of RTSF in everyday construction practice. The Anagennisi partners, Dulex Ltd in collaboration with Gradmont-Gradacac Ltd and University of Zagreb, designed, cast and monitored the long-term shrinkage deformations of the indoor slab-on-grade slab at Gradmont's precast concrete factory in Gradacac, Bosnia and Herzegovina. A hybrid RTSF mix (20 kg/㎥ of MSF+10 kg/㎥ of RTSF) was used to comply with the design criteria which included a maximum load capacity of 20 kN/㎡. The slab was monitored for one year using surveying equipment and visual inspection of cracks. During the monitoring period, the slab exhibited reasonable deformations (a maximum displacement of 3.3 mm for both, horizontal and vertical displacements) whilst after five years in use, the owners did not report any issues and were satisfied with the construction methodology and materials used. This work confirms that RSTF is a viable and sustainable solution for slab-on-grade applications.

• Coupled systems mechanics
• /
• v.9 no.2
• /
• pp.111-123
• /
• 2020

Wastewater treatment plants (WWTPs) with activated sludge system are widely used throughout the most common technologies in the world. Most treatment plants require optimization of certain treatment processes using dynamic modeling. A lot of examples of dynamic simulations require reliable data base of diurnal variation of the inflow and typical concentrations of parameters such as Chemical Oxygen Demand (COD), Total Kjeldahl Nitrogen (TKN), etc. Such detailed data are not available, which leads to problemsin the application of dynamic simulations. In many examples of plants, continuous flow measurements are only performed after the primary clarifier, whereas measurements from influent to the plant are missing, as is the case with the examples in this paper. In some cases, a simpler, faster and cheaper way can be applied to determine influent variations, such as the "HSG-Sim" method ("Hochschulgruppe Simulation"). "Hochschulgruppe Simulation" is a group of researchers from Germany, Austria, Switzerland, Luxembourg, Netherlands and Poland (see http://www.hsgsim.org). This paper presents a model for generating daily variations of inflow and concentration of municipal wastewater quality parameters, applied to several existing WWTPs in Bosnia and Herzegovina (B&H). The main goal of the applied method is to generate realistic influent data of the existing plants in B&H, in terms of flow and quality, without any prior comprehensive survey and measurements at the site. The examples of plants show the influence of overflow facilities on the dynamics of input flow and quality of wastewater, and a strong influence of the problems of the sewerage systems.