• Journal of Welding and Joining
• /
• v.9 no.4
• /
• pp.28-39
• /
• 1991

The change of microstructure in the bonded interlayer and mechanical properties of the joints were investigated during Transient Liquid Phase Diffusion Bonding(TLP bonding) of STS304/SM17C and STS304/SM45C couples using Ni base amorphous alloys added boron and prepared alloy as insert metal. Main experimental results obtained in this study are as follows: 1) Isothermal solidification process was completed much faster than theoretically expected time, 14ks at 1473K temperature. Its completion times were 3.6ks at 1423K, 2.5ks at 1473K and 1.6ks at 1523K respectively. 2) As the concentration of boron in the insert metal increased, the more borides were precipitated near bonded interlayer and grain boundary of STS304 side during isothermal solidification process, its products were $M_{23}P(C,B)_6}_3)$ The formation of grain boundary during isothermal solidification process was completed at structural carbon steel after starting the solidfication at STS304 stainless steel. 4) The highest value of hardness was obtained at bonded interface of STS304 side. The desirable tensile properties were obtained from STS304/SM17C, STS304/SM45C using MBF50 and experimentally prepared insert metal with low boron concentration.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.99-108
• /
• 1995

The experiment was carried out to define the effect of the boron in nutrient solution on the development of mulberry root and cold damage. The length of shoots only attained about 50cm and then stopped in case of boron deficiency, while the mulberry trees developed vigorous and attained over 190cm long under boron supply condition. When boron is deficient, the measles appeared on surface of the stem and the necrosis appeared on the petiole, midribs and veins of leaves. At 70 days after planting, almost all new roots and old roots changed to brown, the lateral roots became necrosis by boron deficiency. After three days of stopping boron supply, many new roots changed to brown and after two days of boron resupply, new roots began to grow out and then new roots normally developed. Content of boron in leaves and barks increased by the increase of boron concentration in nutrient solution and maximum boron content in leaves and barks was obtained with boron-sufficient treatment of 0.5ppm. Treatment of 0.5ppm boron supply indicated that the leaves and barks contained more phospholipid, protein, sugar, RNA and proline than treatment of 0.01ppm boron supply in nutrient solution. The cuttings grown in boron supply nutrition have a sufficient tolerance at -10$^{\circ}C$ and -15$^{\circ}C$ for 24 hours while cuttings grown in boron-deficient nutrition have a weak tolerance at the same condition. As mentioned above, we can conclude that the effect of boron deficiency on root development is much severe and the relationship between the lack of boron and cold damage is very closely related.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.352-356
• /
• 2014

Various studies have been done to improve the properties of the steel by adding boron to the steel. Some studies have reported on the analysis of the boron in steel by AAS (atomic absorption spectrometry), ICP-OES(inductively coupled plasma-optical emission spectrometry), ICP-MS (inductively coupled plasma/mass spectrometry). The volatile loss of boron of steel in sample digestion and the separation procedure for avoiding matrix effect by high concentration of iron are difficulties for determination of boron in steel. The method to determine boron in steel by ICP-MS was developed without volatilization of boron in sample digestion step with $HNO_3-NH_4HF_2$ digestion method, and the additional separation process for avoiding matrix effect. Complete decomposition of steel with $HNO_3-NH_4HF_2$ digestion method, and boron determination by ICP-MS in the matrix of high concentration of iron were possible. Quantitative recoveries of boron in certified standard steel by new method in this study were 103 to 111%, and the relative standard deviation is less than 5%. The method detection limit was $1.17{\mu}g/g$.

• Resources Recycling
• /
• v.25 no.4
• /
• pp.3-10
• /
• 2016

A lot of researches have been carried out on the recovery of resources from the seawater all over the world. The boron concentration in seawater is low about at 4.5ppm, but considering the volume of seawater, the total weight of dissolved boron amounts to about 5.4 trillion tons. The boron is an essential resource in about 300 kinds of industries. Korea has imported all of the boron and spent more than 700 billion won each year. In this article, we introduce the domestic and international research trends and technologies for removing or recovering the boron from wastewater and seawater. Most of the researches have been conducted to remove the boron from the desalination process, and to recover the boron mainly from wastewater and brine. The technique for the recovery of the dissolved boron includes the ion exchange, which is the most representative, the adsorption membrane filtration (AMF), solvent extraction, and so on.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.3
• /
• pp.175-182
• /
• 2017

Background: Ginseng is a perennial crop grown for more than four years in the same place. Therefore, it is highly affected by the soil environment, especially nutrients in the soil. The present study was carried out to investigate to the influence of boron and iron concentrations on the physiological status, growth, and mineral uptake of ginseng to obtain the basic information for diagnosing a physiological disorder in ginseng plants. Methods and Results: The boron and iron concentrations were controlled at 3, 30, 150, 300 and 2, 20, 100, $200mg/{\ell}$, respectively. When treated with $150mg/{\ell}$ of boron, the ginseng plants showed yellowing or necrosis symptoms at the edge or end of their leaves. Compared with the $3mg/{\ell}$ treatment, the root weight decreased by 13 and 24% in the 150 and $300mg/{\ell}$ treatments, respectively. When treated with $20mg/{\ell}$ of iron, the ginseng plants showed yellowing between the veins of the leaves followed by the formation of brown spots. The root weight gradually decreased with increasing iron concentration. Approximately 55% decrease in root weight was observed upon treatment with $200mg/{\ell}$ of iron. Conclusions: The boron toxicity occurs in the leaves of ginseng at the boron concentration of approximately 1,900 mg/kg or more. The iron toxicity occurs at the iron concentration of approximately 120 mg/kg for leaves and 270 mg/kg for roots.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.864-872
• /
• 2021

Objective : The aim of our study is to investigate the cytotoxic, antioxidant, and antimicrobial effects of newly synthesized boron compounds in U87MG glioblastoma cell treatment. Methods : We synthesized boron glycine monoester (BGM) and boron glycine diester (BGD) structures containing boron atoms and determined their cytotoxic activities on glioblastoma by the MTT method. The inhibitory concentration 50 (IC₅₀) value was calculated with GraphPad Prism 5.0 program. The IC₅₀ values were administered 48 hours on U87MG glioblastoma cell. Catalase (CAT), acid phosphatase (ACP) and alkaline phosphatase (ALP) enzyme activity, malondialdehyde (MDA), total glutathione (GSH), and total protein levels were detected using spectrophotometric methods. We determined the antimicrobial activities of BGM and BGD with the disc diffusion method. Results : After 48 hours of BGM and BGD application to U87MG glioblastoma cells, we found the IC₅₀ value as 6.6 mM and 26 mM, respectively. CAT and ACP enzyme activities were decreased in BGM and BGD groups. MDA which is a metabolite of lipid peroxidation was increased in both boron compounds groups. GSH level was reduced especially in BGD group. BGM and BGD have been found to be antimicrobial effects. Conclusion : Boron compounds, especially the BGM, can provide a new therapeutic approach for the treatment of glioblastoma with their anticancer, antioxidant, and antimicrobial effects.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.193-198
• /
• 2013

In general, boron recovery of 40-90% could be achieved by Reverse Osmosis (RO) membranes in neutral pH condition. As an emerging technology, Forward Osmosis (FO) membrane has attracted growing interest in wastewater treatment and desalination. The objective of this study is to evaluate the possibility of the boron removal in radioactive liquid waste by FO. In this study, the performance of FO was investigated to remove boron in the simulated liquid waste as the factors such as pH, osmotic pressure, ionic strength of solution, etc. The pH of feed solution is a major operating parameter which strongly influences to the permeation of boron and more than 80% of boron content can be separated when conducted at pH values less than 7. The water flux is not influenced but the boron flux and permeation rate tends to decrease in the low salt concentration of 1,000 mg/L. The boron flux increases linearly, but the permeation ratio of reducing boron is nearly constant even with changes in the draw solution concentration.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.46-50
• /
• 1999

Effects of $(NH_4)_2HPO_4$ and boron compounds ($Na_2B_4O_7:H_3BO_3=5:1\;ratio$) on the flame retarding characteristics of the surface modified wood powder-filled polypropylene composites were studied experimentally. The mechanical properties of m-phenylene dimaleimide(PDMI)-modified polypropylene composite were also compared with those of unmodified one. The flame retardance of $(NH_4)_2HPO_4$-modified wood powder composites was more improved than that of boron compounds-modified one. The impact strength of composites increased and the tensile strength of those decreased progressively with an increase of wood powder loading. The mechanical properties of modified polypropylene composites are more improved than those of unmodified one. The tensile strength also increased marginally with increasing the concentration of flame retardants, yielding a maximum when the concentration of flame retardant is 25.0 wt %. And the tensile strength of the composite was increased up to 16 wt % with increasing concentration of PDMI.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.795-798
• /
• 2003

Toxic organics are of great environmental concern primarily because they are toxic to mammals and birds, and are relatively soluble in water to contaminate surface water and groundwater. In this study, the decomposition of phenol, a widely used organic, in aqueous solutions by Boron doped diamond(BDD) electrode was examined. Thin, Boron-doped conducting diamond films are expected to be excellent electrodes for industrial electrolysis. Boron-doped diamond (BDD) were used as anode for generating ozone gas by electrolysis of acid solution. In this work. we have studied ozone generating system using BDD electrode. In order to determine the ozone generation properties of diamond electrode, experimental conditions, electrolyte concentration, temperature, flow rate and reaction time were varied diversely. As a result, we could confirm that ozone gas was generated successfully and the performance of diamond electrode was stable for electrolyte while $PbO_2$ electrode was disintegrated. Actually we are found that ozone amount increased by lowering the temperature of electrolyte. Decomposition of phenol concentration in the reaction solution by photolytic ozonation( $UV/O_3$) was analyzed by HPLC epuipped with a UV detector.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1676-1685
• /
• 2021

We develop a new high-fidelity multiphysics model to simulate boron chemistry in the porous Chalk River Unidentified Deposit (CRUD) deposits. Heat transfer, capillary flow, solute transport, and chemical reactions are fully coupled. The evaporation of coolant in the deposits is included in governing equations modified by the volume-averaged assumption of wick boiling. The axial offset anomaly (AOA) of the Seabrook nuclear power plant is simulated. The new model reasonably predicts the distributions of temperature, pressure, velocity, volumetric boiling heat density, and chemical concentrations. In the thicker CRUD regions, 60% of the total heat is removed by evaporative heat transfer, causing boron species accumulation. The new model successfully shows the quantitative effect of coolant evaporation on the local distributions of boron. The total amount of boron in the CRUD layer increases by a factor of 1.21 when an evaporation-driven increase of soluble and precipitated boron concentrations is reflected. In addition, the concentrations of B(OH)₃ and LiBO₂ are estimated according to various conditions such as different CRUD thickness and porosity. At the end of the cycle in the AOA case, the total mass of boron incorporated in CRUD deposits of a reference single fuel rod is estimated to be about 0.5 mg.