• 제목/요약/키워드: Boric acid

검색결과 221건 처리시간 0.02초

Borax 및 Boric Acid에 의한 면직물의 일시적 방염 가공 (Non-durable Flame Retardant Finish of Cotton Fabric by Borax and Boric Acid)

  • 남상우
    • 대한가정학회지
    • /
    • 제25권1호
    • /
    • pp.43-50
    • /
    • 1987
  • Non-durable flame retardant finish, borax/boric acid mixed solution, was applied to cotton fabric with pad-dry method. The LOI(limited oxygen index) was measured as the measare of the flame retardant effect. The TGA was investigated to know the thermal behavior of the samples. In addition, the solubility of the solutions was investigated. The results were as follows: 1) There was a synergism of flame retardant effect in the borax/boric acid mixed solution treatment and the maximum synergism was shown around the ratio of 7 : 3 2) After the borax/boric acid solution treatment, the degradation temperature was lowered and degraded at the larger temp range with slower rate. The residual char length also increased. 3) The solubility of borax/boric acid become higher when the ratio of borax/boric acid became similar. Compositions from 80/20 to 40/60 borax/boric acid mixtures were solubilized well in room temperatuare or warmwater therefor there was no problem for home use.

  • PDF

회수 Boric Acid를 이용한 Dicarboxylic Acid의 환경친화적 에스터화 반응 (Eco-friendly Esterification of Dicarboxylic Acid Using Recovered Boric Acid)

  • 박준성;우제완
    • 공업화학
    • /
    • 제24권1호
    • /
    • pp.72-76
    • /
    • 2013
  • 본 연구에서는 norbornene 디에스터 유도체를 합성하는 공정에서 반응 부산물로 생성되는 boric acid를 회수하여 norbornene diacid의 에스터화 반응에 재사용 가능성을 조사하였다. Boric acid를 4가지의 alcohol과 에스터화 시켜 4종류의 trialkyl borate (tributyl borate, tripentyl borate, triisopentyl borate, trihexyl borate)를 합성한 다음 이를 norbornene dicarboxylic acid와 반응시키는 2단계 공정으로 디에스터 유도체를 합성하였다. 이 때 norbornene dicarboxylic acid의 전환율은 89.50~99.31%였다. 디에스터화 반응의 부산물인 boric acid를 NaCl염과 함께 회수하여 trialkyl borate를 합성한 후 정제한 결과 회수율은 92.43~99.35%이었다. 이를 다음 반응에 사용한 결과 디에스터의 수율은 43.70~64.39%였고 순도 97.70~99.24%로 수율이 일부 감소되었으나 손실이 크지 않음을 확인하였다. 주요 반응 부산물인 boric acid를 공정내에서 재사용이 가능하므로 화합물 배출에 의한 환경오염을 사전에 예방할 수 있는 친환경공정으로 적용 가능함을 확인하였다.

Nitrogen Fixation and In Situ Dry Matter and Fibre Constituents Disappearance of Wheat Straw Treated with Urea and Boric Acid in Murrah Buffaloes

  • Dass, R.S.;Mehra, U.R.;Verma, A.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권8호
    • /
    • pp.1133-1136
    • /
    • 2000
  • Wheat straw was treated with 4 per cent urea at a moisture level of 50 per cent alongwith different levels of boric acid viz. 1, 2, 3 and 4 per cent, under laboratory conditions to know the impact of boric acid on ammonia-N fixation in the straw. Murrah buffaloes were used for determining the disappearance of dry matter, CP and fibre constituents by nylon bag technique. Ammoniation increased CP content of wheat straw, which increased further due to addition of boric acid. Low level of boric acid (1%) had no adverse effect on fibre constituents disappearance but at higher levels there was a depressioon in the disappearance of fibre coonstituents. It can be concluded that low level of boric acid was sufficient to trap the excess ammonia released during urea ammoniation of wheat straw without affecting other constituents and their disappearance in the rumen of buffaloes.

Anodization of Aluminium Samples in Boric Acid Solutions by Optical Interferometry Techniques

  • Habib, K.
    • Corrosion Science and Technology
    • /
    • 제4권6호
    • /
    • pp.217-221
    • /
    • 2005
  • In the present investigation, holographic interferometry was utilized for the first time to monitor in situ the thickness of the oxide film of aluminium samples during anodization processes in boric acid solutions. The anodization process (oxidation) of the aluminium samples was carried out by the technique of the electrochemical impedance spectroscopy(EIS), in different concentrations of boric acid (0.5-5.0% $H_3BO_3$) at room temperature. In the mean time, the real-time holographic interferometry was used to measure the thickness of anodized (oxide) film of the aluminium samples in solutions. Consequently, holographic interferometry is found very useful for surface finish industries especially for monitoring the early stage of anodization processes of metals, in which the thickness of the anodized film of the aluminium samples can be determined without any physical contact. In addition, measurements of electrochemical values such as the alternating current (A.C) impedance(Z), the double layer capacitance($C_{dl}$), and the polarization resistance(Rp) of anodized films of aluminium samples in boric acid solutions were made by the electrochemical impedance spectroscopy(EIS). Attempts to measure electrochemical values of Z, Cdl, and Rp were not possible by holographic interferometry in boric acid especially in low concentrations of the acid. This is because of the high rate of evolutions of interferometric fringes during the anodization process of the aluminium samples in boric acid, which made measurements of Z, Cdl, and Rp are difficult.

폴리비닐알코올/디메틸술폭시드/물/붕산 용액계에 있어서 물함량이 유변학적 특성에 미치는 영향 (Effect of Water Level on the Rheological Properties of Polyvinyl Alcohol/Dimethyl Sulfoxide/Water/Boric Acid Solution Systems)

  • 김병철;김승규
    • 유변학
    • /
    • 제11권1호
    • /
    • pp.28-33
    • /
    • 1999
  • 붕산은 폴리비닐알코올(PVA)의 히드록시기간의 가교를 형성할 수 있기 때문에 PVA용액내에 가입되면 용액의 유변학적 특성에 큰 영향을 미친다. 본 연구에서는 양이온이 존재하지 않는 경우 PVA/디메틸술폭시드(DMSO)/물/붕산계에 있어서 물의 함량이 유변학적 특성에 미치는 영향을 조사하였다. PVA/DMSO/물계에 붕산을 1 wt.% 첨가할 경우 물 함량이 증가할 수록 점도가 급속히 감소하였다. PVA/DMSO계에 1 wt.%의 붕산이 가입된 경우 양이온이 없어도 강한 가교구조를 형성하여 탄성겔의 점탄성특성을 나타낸 반면 PVA/물계에 1 wt.%의 붕산이 가입된 경우 전형적인 점성물질의 특성을 나타냈다. 순수한 DMSO나 혼합용매중 DMSO의 함량이 높으면 양이온의 존재없이도 붕산첨가에 의해 가교구조를 형성하여 급격한 점도변화를 나타냈으나 물 함량이 풍부한 계에서는 붕산의 첨가에 따른 점도의 변화가 미약하였으며 순수한 물을 용매로 사용한 경우 붕산첨가의 영향이 거의 없었다. 저장탄성률도 PVA/DMSO계의 경우가 가장 높은 값을 보였고 혼합용매계에는 물함량이 증가할 수록 감소하였다.

  • PDF

페놀계 활성탄소의 전기화학 특성에 미치는 붕산 처리의 영향 (Effect of Boric Acid Treatment on the Electrochemical Properties of the Phenol-Based Activated Carbon)

  • 정민정;유혜련;이다영;이영석
    • 공업화학
    • /
    • 제24권2호
    • /
    • pp.201-207
    • /
    • 2013
  • 본 연구에서는 전기이중층 커패시터의 전극 활물질로 사용되는 페놀계 활성탄소의 비 정전용량의 증가를 위하여 붕산을 이용하여 표면처리를 수행하였다. 또한, 붕산 처리가 전기화학 특성에 미치는 영향에 대하여 고찰하였다. 활성탄소의 붕산 처리는 활성탄소의 표면에 전기화학적 특성 향상에 도움이 되는 퀴논형 관능기(O=C)의 비율을 효과적으로 증가시켰으며, 비표면적과 총 기공 부피 및 미세공 부피를 증가시켰다. 최적의 조건으로 붕산 처리된 활성탄소는 미처리활성탄소에 비해 비 정전용량이 약 20% 증가하였다. 이러한 결과로부터 활성탄소의 붕산 처리는 활성탄소의 비 정전용량을 효과적으로 증가시킬 수 있다고 사료된다.

중성자 조사에 의한 붕산수의 화학특성 변화 (Change of chemical properties by neutron irradiation in boric acid solution)

  • 최계천;연제원;김원호
    • 분석과학
    • /
    • 제18권4호
    • /
    • pp.292-297
    • /
    • 2005
  • 붕산수를 중성자 조사하였을 때 발생하는 화학특성 변화를 측정하였다. 붕산 용액의 pH는 조사시간과 붕산농도가 증가할수록 감소하였다. 물의 방사분해물인 과산화수소는 붕산농도에 비례하였고 조사시간에는 반비례하였다. 기체 방사분해물인 수소와 산소기체는 당량비로 생성되었다. $^{10}B(n{\cdot}{\alpha})^7Li$ 핵반응으로 생성된 Li과 조사시간과의 상관관계는 낮은 붕산 농도범위에서는 좋지 않았으나 높은 농도범위에서는 비례성이 다소 좋아지는 현상을 발견하였다.

단일항체를 발현하는 형질전환 식물체의 In Vitro 화분발아에 대한 Boric Acid의 영향 (Effect of Boric Acid on In Vitro Pollen Germination in Transgenic Plants Expressing Monoclonal Antibodies)

  • 안미현;이경진;고기성
    • Journal of Plant Biotechnology
    • /
    • 제34권4호
    • /
    • pp.339-346
    • /
    • 2007
  • 식물화분발아는 수분수정을 통한 식물의 종자형성과 식물개체의 지속적 세대유지를 위한 중요한 요소이다. 따라서, 본 연구에서는 boric acid를 이용하여 형질전환 하지 않은 (NT) 식물과 항암활성 (anti-colorectal cancer mAb CO17-1A, anti-breast cancer mAb BR55) 혹은 항바이러스 활성을 갖는 항체 (anti-rabies virus mAb57)의 유전인자를 발현하는 형질전환식물 간의 in vitro pollen germination과 Pollen tube growth의 차이를 알아보았다. Boric acid의 화분발아에 미치는 영향을 보기 위하여 0, 5, 10, 15, 20, $40{\mu}g/mL$의 농도를 갖는 발아용액 (germination buffer)을 담배식물 화분에 처리하여 pollen germination rate을 본 결과 $20{\mu}g/mL$에서 가장 높게 발아율 (49.5%)을 보였다. Boric acid ($20{\mu}g/mL$)에 대해 형질전환식물과 NT 식물에서 화분발아율을 관찰한 결과, boric acid를 처리하지 않은 화분에 비해 형질전환여부에 관계없이 발아율이 3-10배 증가하였다. 또한, boric acid $20{\mu}g/mL$농도에서 형질전환식물과 NT 식물의 pollen tube length의 성장률이 가장 높게 나타났다. 시간 별로 형질전환 식물들의 Pollen tube length를 확인 한 결과, germination buffer ($20{\mu}g/mL$)를 처리하고 난 후 3시간까지 가장 빠른 성장률을 보였으며, 3시간 후에는 그 성장률이 둔화됨을 확인하였다. Western blot를 이용하여 식물의 화분과 잎에서 황체유전자 단백질 발현을 확인하였다. 화분과 잎에서의 발현을 비교해 본 결과, 잎에서 항체의 안정한 발현을 확인하였다. 본 연구결과를 통해 $20{\mu}g/mL$의 boric acid가 항체발현 형질전환담배식물의 in vitro pollen germination을 보기 위해 가장 적절한 농도라는 것을 제시하였다. 궁극적으로 의료용 항체유전자를 발현하는 형질전환식물의 in vitro pollen germination viability를 확인함으로써 형질전환식물의 화분의 안정적인 수분수정이 이루어질 수 있음을 간접적으로 제시하였다.

Investigation of acrylic/boric acid composite gel for neutron attenuation

  • Ramadan, Wageeh;Sakr, Khaled;Sayed, Magda;Maziad, Nabila;El-Faramawy, Nabil
    • Nuclear Engineering and Technology
    • /
    • 제52권11호
    • /
    • pp.2607-2612
    • /
    • 2020
  • The present work was aimed to show the possibility of using hydrogel (acrylic/boric acid) for evaluation of the neutron radiation shielding. The influence of acrylic acid concentration, different gamma doses and relative contents of boric acid were studied. The physical properties and the thermomechanical stability of the studied samples were investigated. The shielding property of the composite for neutron was tested by Pu-Be neutron source (5 Ci) under room temperature. The neutron fluence rates and gamma fluxes were measured using a stilbene organic scintillator. The macroscopic effective removal cross-section ΣR (cm-1) of fast neutrons and total attenuation coefficient μ (cm-1) of gamma rays has been studied experimentally. The transmission parameters, the relaxation length (??) and the half-value layer (HVL) were obtained. The obtained results indicated that the addition of boric acid to acrylic acid tends to increase the macroscopic effective removal cross-section ΣR (cm-1) to 0.141 compared to 0.094 of ordinary concrete.