• 제목/요약/키워드: Borg's CR10

검색결과 21건 처리시간 0.024초

작업형태 및 최대 수의적 수축에 따른 등척성 근지구력에 관한 연구 (The Study of Isometric Endurance Time by Task Type and Maximum Voluntary Contraction)

  • 심정훈;이상도
    • 대한인간공학회지
    • /
    • 제22권2호
    • /
    • pp.57-69
    • /
    • 2003
  • This study was performed to investigate the isometric endurance time as percentages of maximum voluntary contraction. Electromyogram(EMG) and Borg's CR-I0 value were measured by push-pull-up-down tasks for 10 healthy males. The normalized EMG value and the MPF(mean power frequency) were used to estimate the muscle recruitment pattern and the development of muscle fatigue. The subjects exerted and maintained 5 levels of %MVC(maximum voluntary contraction) in $90^{\circ}$ shoulder flexion/ 180oelbow extension at sitting posture. The up-task showed the lower endurance time and higher Borg's CR-I0 value than the other task types. Comparing Rohmert's curve with the endurance time of task types. Rohmert's curve overestimated the endurance time of up-task and underestimated the endurance time of push-pull-down tasks. The normalized EMG value showed that muscles recruitment patterns were different from task types. The 4 muscles(biceps brachii muscle, tricep brachii muscle. middle deltoid muscle. trapezius muscle) recruitment patterns of up-task were higher than those of other tasks. The MPF value decreased with the endurance time, and the shift of MPF at up-task was larger than that of the other task types.

작업조건의 변화에 따른 상지의 피로 특성 분석 (An Analysis of Fatigue Characteristics of Upper limbs by Task Conditions Change)

  • 이상도;심정훈
    • 산업경영시스템학회지
    • /
    • 제28권3호
    • /
    • pp.75-86
    • /
    • 2005
  • To investigate the fatigue characteristic of upper limbs, this study analyzed RMS(root mean square) and MPF(mean power frequency) value between initial and terminal stages of each experiment condition. And the effect of intermittent endurance time was evaluated using the Borg's CR10 value that was measured for the parts of upper limb. According to the results of ANOVA on RMS value, there were significant difference on the %MVC about push, pull, and down force exertion. Particularly the ANOVA of up force exertion was significant difference on shoulder flexion, elbow flexion and rest time as well as %MVC. The results of ANOVA for MPF value were significant difference on the %MVC in regard of the push and up force exertion. In case of up force exertion, MPF value tended to shift low frequency at all of the experiment conditions. According to the analysis of duty cycle, RMS value considerably increased over 50% duty cycle and as the %MVC increased, the duty cycle affected the increase of RMS value. MPF value for up and down force exertion decreased at 33%, 50% and 67% duty cycle for all of %MVC. Borg CR10 value of hand and forearm were below the 3-point to the 40% of endurance time at 30%MVC and to the 20% of endurance time at 50%MVC with the exception of up force exertion. But Borg CR10 values of upper arm and shoulder at up force exertion were more than 3-point to the 20% of endurance time at 30%MVC and in the start point of endurance time at 50%MVC.

정적인 자세에서 목의 주관적 작업부하 평가 (A Study on Subjective Evaluation of Neck Workload in Static Work)

  • 김유창;정현욱
    • 산업공학
    • /
    • 제16권2호
    • /
    • pp.222-228
    • /
    • 2003
  • Computer-dominated jobs and industrial automation have rapidly created work-related musculoskeletal disorders(WMSDs) and WMSDs are also founded in employees of other general industries. WMSDs has been growing problems for Korean industries with higher incidence rate every year. The objective of this paper is to analyze the effects of the neck muscle workload according to postures(joint angle) and load weights. Seven male students participated in this study. Neck workload was rated on each person using a Borg's CR-10 scale. ANOVA showed that the CR-10 ratings were statistically significant according to postures and load weights. To reduce the large number and severity of WMSDs, which employees have been experiencing, we need to redesign the job in workplace so that we can control hazards that are reasonably likely to be causing or contributing to the WMSDs. The results of this study can be used to establish the safety criteria of joint angle and weight of neck workload.

정신물리학적 접근방법을 이용한 들기작업의 작업하중 평가에 관한 연구 (A Psychophysical Approach on the Assessment of Lifting Loads)

  • 박현진;옥민우;장성록
    • 한국안전학회지
    • /
    • 제27권4호
    • /
    • pp.96-100
    • /
    • 2012
  • Low back pain (LBP) is a major issue in modern industrialized society which is mainly caused by manual material handling (MMH) tasks. The objective of this study was to provide scientific data for establishing work standard for Korean workers throughout the laboratory experiment including some specific lifting tasks. Thirty male college students were recruited as participants. The maximum voluntary contraction (MVC), recommended weight limit (RWL), and psychophysical safety weight using Borg's CR-10 scale were studied. Results showed that the RWL was 8.4% MVC higher than the proposed psychophysical safety weight. Based on this result, it is suggested that the NIOSH lifting equation (NLE) should not be directly applied to Korean without reasonable modifications. The ratio of psychophysical safety weight to MVC was ranged from 20.1 to 26.4%. It is expected that use of the methodology in this study may provide better expectation of the work ability of Korean for reducing lower back pains caused by MMH.

정적자세 유지시 수공구의 무게가 상완의 postural tremor에 미치는 영향에 관한 연구

  • 송호영;김재영;조창규;윤명환;이면우
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
    • /
    • pp.151-157
    • /
    • 1996
  • Postural tremor of the upper arm in a static posture was measured to provide guidelines of hand tool weight. Three types of camera recording postures were selected. Postural tremor was measured on five levels of tool weights; no weight, 400g, 800, 1200g, and 1600g. For each conditions, upper arm postural tremor was measured together with EMG of biceps, deltoid, and pectoralis major, and Borg's CR-20 scale ratings of perceived exertion. Results of the experiment are as follows; Frequency analysis of tremor revealed that increased amplitude of frequency band of 2-4Hz and 10-14Hz was observed. Postural tremor of the upper arm maintained the initial level until fatigue developed. After the development of fatigue, the rate of the change of postural tremor was significantly increased. Different tool weights and hand postures showed different rate of tremor increase. And time to fatigue and the corresponding endurance time was positively correlated with Borg's RPF scores.

  • PDF

Effect of tool weight and hand posture on the postural tremor of the upper extremity

  • Kim, Jae Young;Song, Ho Young;Yun, Myung Hwan;Yun, Myun W
    • 대한인간공학회지
    • /
    • 제15권2호
    • /
    • pp.177-184
    • /
    • 1996
  • In light-weight hand tools, static posture may result in postural fatigue. Psotural tremor of the upper extremity in a static posture was measured to provide guidelines for hand tool weight. Postural tremor was measured on five levels of tool weitht : no weight, 400g, 800g, 1200g, and 1600g. Three types of camcorder recording postures were selected. For each condition, postural tremor was measured together with ENG of biceps, deltoid and pectoralis major, and Borg's CR-20 ratings of perceved exertion. Results of the experiment are as follows : frequency analysis of tremor revealed increased amplitude of frequency bands of 2-4Hz and 10-14Hz. Postural tremor of the upper extremeity maintained the initial level until fatigue developed. After the development of fatigue, the rate of change of postural tremor significantly increased. Different tool weights and hand postures showed different rates of tremor increase. Time tp fatigue and corresaponding endurance time were positively correlated with Borg's RPE scores.

  • PDF

한국 고령층의 일상생활 활동 불편도 분석 (The Perceived Discomfort in the Daily Activities of Korean Elderly)

  • 이동훈;나석희;안은선;정민근
    • 대한인간공학회지
    • /
    • 제26권2호
    • /
    • pp.67-79
    • /
    • 2007
  • The objective of this study is to investigate a perceived discomfort and cause of Korean elderly in various activities such as work and leisure as well as in daily activities. 120 subjects (30 female and 30 male for each age: the young and elderly) participated in the interview type of questionnaire. Each participant answered to 41 items of activities of daily living. The examination of each item was progressed with 3 steps: whether to do the activity or not, degree of activity discomfort, and the reasons or causes of discomfort. Borg's CR10 scale is used to measure the degree of discomfort of daily activities. As a result, there are differences for the proportion of performers between two age groups, except for essential activities such as individual maintenance and housekeeping. The elderly complained about their daily activities more than the young did, and the degree of discomfort of women was significantly larger than that of men with aging. There are seven items, the mean degree of discomfort of which is over three points for the elderly, and they showed significant difference between two age groups. It was the important reason that physical capacities such as muscle strength and suppleness are declined. The results showed the characteristics of Korean elderly in the whole daily activities. These will be used to understand various life styles of them and to propose a field or direction of study related to the aging.

주관적 작업부하를 이용한 하체 서포터 평가에 관한 연구 (The Study Used Brog's Scale on the Lower Extremity Supporter)

  • 김유궁;장은준
    • 한국안전학회지
    • /
    • 제23권5호
    • /
    • pp.105-110
    • /
    • 2008
  • This study focused on the decreased effect of the work load on using the lower extremity supporter in kneeling posture. Fatigue measures included subjective discomfort ratings through the use of the Borg's CR-10 scale based parameters. The resting period and work method were considered as independent variables. The break time conditions are grouped into 10 seconds after work for 1 min and not exist break time. The method of work conditions are divided into four types. There are kneeling with the lower extremity supporter, kneeling with the knee protector, just kneeling and squatting. The result of the ANOVA of the shift value of subjective discomfort showed the followings: 1) There were differences as regards to the method of the work, the break time and the part of body($p{\leq}0.05$). 2) The lower extremity supporter showed the least subjective discomfort in other part of body except the upper leg.

소프트 키보드의 터치 위치별 지각 불편도 및 근전도 분석 (Analysis of Perceived Discomfort and EMG for Touch Locations of a Soft Keyboard)

  • 최보리;정기효
    • 대한산업공학회지
    • /
    • 제39권2호
    • /
    • pp.99-104
    • /
    • 2013
  • With diversity of mobile services (e.g., messenger, and social network service) on smartphone, the demand of text input using a soft keyboard is increasing. However, studies on subjective and physiological responses of users for various touch locations are lacking. The present study investigated the ergonomic effects according to touch locations of a soft keyboard on smartphone. The experiment of the present study measured perceived discomfort using Borg's CR-10 scale and electromyography (EMG) on forearm (abductor pollicis longus, and extensor digitorum communis) and thumb (abductor pollicis brevis, and first dorsal interossei) muscles. Perceived discomfort was significantly varied from 0.7 (extremely weak discomfort) to 2.5 (weak discomfort) depending on touch locations. %MVC according to touch locations was only significant at abductor pollicis brevis which varied from 10% to 23%. The experimental results of the present study can be utilized in the ergonomic design of a soft keyboard.

정적인 자세에서 근전도를 이용한 목 근육의 작업부하 평가 (A Study on Evaluation of Neck Muscle Workload in Static Work Using EMG)

  • 김유창;정현욱;장성록
    • 한국안전학회지
    • /
    • 제20권4호
    • /
    • pp.148-153
    • /
    • 2005
  • Computer dominated jobs and industrial automation have rapidly created work-related musculoskeletal disorders(WMSDs) and WMSDS are expanding to employee of other general industry. Specific risk factors associated with WMSDs include repetitive motion, heavy lifting, forceful exertion, contact stress, vibration awkward posture and rapid hand and wrist movement. The purpose of this paper is to analyze the effects of the neck muscle workload according to posture(joint angle) and load weight. Seven male students participated in this study. To analyze neck muscle workload was studied on electromyographic(EMG) activity for sternocleidomastoid and trapezius, was subjectively rated using a Borg's CR-10 scale. ANOVA showed that the CR-10 ratings and most EMG root-mean-square (RMS) value were statistically significant improvement according to posture(joint angle) and load weight. The results of this study indicate the joint angle and weight of neck muscle workload to provide safe working conditions. To reduce the large number and severity of WMSDs employees have been experiencing, we need to redesign the job in workplace to identify and control hazards that are reasonably likely to be causing or contributing to the WMSDs.