• 대한가정학회지
• /
• 제25권1호
• /
• pp.43-50
• /
• 1987

Non-durable flame retardant finish, borax/boric acid mixed solution, was applied to cotton fabric with pad-dry method. The LOI(limited oxygen index) was measured as the measare of the flame retardant effect. The TGA was investigated to know the thermal behavior of the samples. In addition, the solubility of the solutions was investigated. The results were as follows: 1) There was a synergism of flame retardant effect in the borax/boric acid mixed solution treatment and the maximum synergism was shown around the ratio of 7 : 3 2) After the borax/boric acid solution treatment, the degradation temperature was lowered and degraded at the larger temp range with slower rate. The residual char length also increased. 3) The solubility of borax/boric acid become higher when the ratio of borax/boric acid became similar. Compositions from 80/20 to 40/60 borax/boric acid mixtures were solubilized well in room temperatuare or warmwater therefor there was no problem for home use.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.492-500
• /
• 2019

본 연구에서는 $9.2MW_e$의 상용규모 순환유동층 보일러에서 화학첨가제 사용에 따른 미세입자 저감에 대한 영향을 확인하였다. 또한 화력 발전소에서 화석연료의 연소 중 발생하는 미세입자를 포집하기 위하여 간단하고 효과적인 포집설비를 개발하였다. 연소 배가스 중 PM 10이하의 입자를 감소시키기 위하여 화학첨가제를 사용하였으며, 사용한 화학첨가제는 borax solution을 사용하였다. 포집된 미세입자 중 PM 10이하의 입자 거동을 확인하기 위하여 입도분석기와 SEM 분석을 통해 확인하였다. Borax solution은 배가스중에 용융된 미네랄을 흡수하여 미세입자를 성장시키는 경향이 있는 것을 알 수 있었다. 결과적으로 borax solution을 사용함으로써 $10{\mu}m$ 이하의 미세입자가 감소되었음을 확인할 수 있었다.

• Korea-Australia Rheology Journal
• /
• 제17권2호
• /
• pp.79-85
• /
• 2005

Aqueous mixtures of hyaluronic acid and poly(vinyl alcohol) system and hydrogels thereof were introduced to obtain new bioartificial materials that have excellent mechanical properties, biocompatibility and enhanced rheological properties. The interactions between hyaluronic acid and poly(vinyl alcohol) and/or borax were investigated by rheological measurements. Preparation parameters of the aqueous mixtures were mixture composition, the degree of hydrolysis of poly(vinyl alcohol) and borax concentration. From the rheological behavior, it could be deduced that the key factor of the interaction between hyaluronic acid and poly(vinyl alcohol) was the hydrogen bonding between them and the effect was pronounced with borax. Enhanced viscosity was observed at the composition of $20wt\%$ of hyaluronic acid solution and $80wt\%$ of poly(vinyl alcohol) and borax solution. Rheological properties were influenced by the degree of hydrolysis of poly(vinyl alcohol) and borax concentration. As the degree of hydrolysis and borax concentration increased, rheological properties increased due to the increased hydrogen bonding and networking of hyaluronate aggregates. Physical hydrogels from hyaluronic acid and poly(vinyl alcohol) were prepared and the composition dependence of the gels was rheologically investigated as well.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.113-114
• /
• 2022

The aim of the research is to evaluate the segregation resistivity of the mixture conditions by changing the PVA and borax solutions for thixotropic property on concrete mixture. Since the water addition caused by producing solutions of PVA and borax induces segregation of the concrete mixture, the unit water was reduced by replacing the water amount for PVA and borax solution. By replacing the water from PVA and borax solutions, the segregation was prevented with prefixed concrete mix design and thixotropic properties were also occurred.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.67-73
• /
• 2012

Structural stability and shock absorption are important properties for corrugated board. In order to maintain structural stability, adhesive properties between top/bottom liners and corrugated medium are not only essential but also important for productivity and product quality. Borax has been an essential ingredient in corrugating adhesive solution. Borax increases viscosity, bonding between starchs and green adhesive bond. The objective of this research is to improving adhesive strength and viscosity stability by adding cross-linking agent instead of borax. Rheology and penetration of main starch gelatinization slurry were affected by borax addition level. Borax increased viscosity and decreased viscosity stability, while cross-linking additives increased viscosity stability and adhesive strength by anchoring effect.

• Advances in materials Research
• /
• 제1권3호
• /
• pp.233-243
• /
• 2012

Thermal reactive diffusion coating of vanadium carbide on DIN 2714 steel substrate was performed in a molten borax bath at $950-1050^{\circ}C$. The coating formed on the surface of the substrate had uniform thickness ($1-12{\mu}m$) all over the surface and the coating layer was hard (2430-2700 HV), dense, smooth and compact. The influence of the kinetics parameters, temperature and time, has been investigated. Vanadium carbide coating was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and X-ray diffraction analysis (XRD). The corrosion resistance of the coating was evaluated by potentiodynamic polarization in 3.5% NaCl solution. The results obtained showed that decrease of coating microhardness following increasing time and temperature is owing to the coarsening of carbides and coating grain size.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.110-111
• /
• 2019

Concrete with high thixotropy has a lower plastic viscosity when pour in, thus demonstrating fluidity, and After poured, the viscosity can be restored again to ensure stable progress without additional liquidity and material separation. Therefore, in this study, a basic study of thixotropy of concrete was proceeded through cross-linked bond of PVA and Borax. Therefore, it is judgment that the higher the concentration of boron solutions, the higher the strength of the interconnections between PVA and boron.

• 분석과학
• /
• 제6권5호
• /
• pp.425-433
• /
• 1993

oxine을 리간드로 이용하여 흡착벗김 전압전류법으로 극미량의 지르코늄을 정량하는 방법을 연구하였다. 이때 지지전해질은 $2.5{\times}10^{-3}M$ borax 완충용액을 사용하였고, oxine의 농도가 $4{\times}10^{-8}M$로 되도록 하여 실험하였다. accumulation potential을 -0.2V, accumulation time을 400sec로 하고 scan rate를 4mV/sec로 하여 실험한 결과 지르코늄의 농도가 $1{\sim}100{\mu}g/L$ 범위에서 얻은 검정곡선은 직선성을 나타내었다.

• 약학회지
• /
• 제27권1호
• /
• pp.1-10
• /
• 1983

Voltammetric deposition and differential pulse anodic stripping (DPASV) of Ge(IV)at a gold electrode was investigated. Germanium (IV) exhibits two stripping peaks by DPASV in sodium borate solution, the first peak at about -1.1v. vs SCE and the second one, in the range of -0.6 to -0.2v. vs SCE. Factors affecting the sensitivity and precision included the nature of working electrode, supporting electrolytes, deposition potential, deposition time, pH, pulse height, voltage scan rate. The relative standard deviation of the measurements of the peak currents, for 100ng/ml Ge(IV), was less than ${\pm}3%$. The detection limit of Ge(IV) was 0.01ng/ml. Percent recovery in the extraction procedure of Ge(IV) from matrices by benzene in c-HCl, followed by back extraction with saturated borax solution, ranged from 96 to 104%.

• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.1-5
• /
• 2015

본 논문은 편백 루버에 붕산, 붕사 및 인산암모늄 수용액을 가압함침 후 외부 복사열원(25, 30 및 $50kW/m^2$)에 따른 점화시간, 임계 열유속 및 질량감소속도 등의 연소특성을 측정하였다. 실험에 사용된 시료의 크기는 $100{\times}100{\times}10mm$이며, 각 외부 복사열원에서 5분간 변화를 3회 반복 측정하였다. 연구결과, $25kW/m^2$의 외부 복사열원에 있어서 착화시간은 Type C-H를 제외하고는 17.4~21.3%의 지연효과를 나타낸 반면 35 및 $50kW/m^2$에서는 큰 차이가 없음을 알 수 있었으며, 평균질량감소속도는 Type A-H와 Type D-H에서 Type N-H보다 낮게 측정되었다. 또한, 외부 복사열원에 따른 착화시간으로부터 임계 열유속은 $14.79{\sim}17.17kW/m^2$로 $10.7kW/m^2$인 Type N-H보다 38.22~60.46% 높게 예측됨에 따라 초기 화재시 화재확대에 대한 지연효과가 있을 것으로 예상된다.