• Title/Summary/Keyword: Boost 컨버터

Search Result 743, Processing Time 0.035 seconds

A Non-isolated DC-DC Converter with High Step-up Ratio and Wide ZVS Range (고승압비와 넓은 ZVS 영역을 갖는 비절연 DC-DC 컨버터)

  • Park, Sung-Sik;Choi, Se-Wan;Choi, Woo-Jin;Lee, Kyo-Beum
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.14 no.4
    • /
    • pp.315-322
    • /
    • 2009
  • In the conventional boost converter, the actual duty cycle is limited as the output voltage increases due to increased voltage and current stress of the switch and diode and voltage surge caused by diode reverse recovery. In this paper a new non-isolated boost converter suitable for high gain applications is proposed. The proposed converter has voltage gain of around 6 when the duty cycle is 0.5. Since ZVS is achieved under CCM, the proposed converter has wide ZVS range. Also, voltage ratings of switch and diode are the same as one third of output voltage, and ratings of input and output passive components are reduced due to the interleaving. In addition voltage surge caused by diode reverse recovery is negligible due to ZCS turn-off of diodes. Operating principle of the proposed converter is described and validated through theoretical analysis, simulation and experiment.

Analysis of Parallel-Input Series-Output(PISO) Boost Converter With Output Voltage Balancing Characteristic (병렬입력/직렬출력(PISO) 부스트 컨버터의 출력 전압 밸런싱 특성 해석)

  • Nam, Hyun-Taek;Cha, Honnyong;Kim, Heung-Geun
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.23 no.1
    • /
    • pp.40-46
    • /
    • 2018
  • In this study, the output voltage balancing characteristics of parallel-input series-output (PISO) boost converter is analyzed. The PISO boost converter is derived by combining two basic boost converters. In comparison with the conventional three-level boost converter, the PISO boost converter can balance the output voltages under an unbalanced load condition without requiring additional circuit components and control strategy. A 2 kW prototype converter is built and tested to verify the output voltage balancing characteristics of the PISO boost converter.

ZVS Tapped Inductor Boost Converter for driving LED Backlight (LED 백라이트 구동용 영전압 스위칭 탭인덕터 부스트 컨버터)

  • Park, Hee-Whan;Kim, Tae-Woo;Park, Sin Kyun
    • Proceedings of the KIPE Conference
    • /
    • 2013.11a
    • /
    • pp.7-8
    • /
    • 2013
  • 본 논문에서는 영전압 스위칭 탭인덕터 부스트 컨버터를 제안한다. 기존 컨버터는 DCM구간에 MOSFET의 Coss과 RC 스너버 및 탭인덕터의 공진에의해 MOSFET 양단에 전압 오실레이션이 발생하면서 턴온 시점에 따라 MOSFET 발열이 결정된다. 그래서 부하 변동과 부품편차와 무관하게 항상 최저전압조건에서 턴온하여 MOSFET의 발열을 저감하는 회로를 제안한다. 본 논문에서는 제안된 부스트 컨버터의 동작원리를 이론적으로 해석하고, 시제품 제작 및 실험을 통해 타당성을 검증한다.

  • PDF

A New Isolated Boost DC/DC Converter for Battery Drive Applications (축전지 구동 응용을 위한 새로운 승압형 DC/DC 컨버터)

  • 노정욱;한승훈;윤명중
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.5 no.1
    • /
    • pp.34-38
    • /
    • 2000
  • 낮은 입력 전압원 응용에 적합한 절연된 승압형 dc/dc 컨버터를 제안한다. 제안된 컨버터는 자기 결합 기법을 사용하여 낮은 스위칭 전류 스트레스, 넓은 입력 전압 범위, 돌입전류 방지등의 특성을 가진다. 비교 분석과 실험결과를 통하여 제안된 컨버터의 우수성을 입증한다.

A Study on Wind Generator Braking using Boost Converter (부스트 컨버터를 이용한 풍력 발전기 제동에 관한 연구)

  • Youn, Young-Chan;Moon, Chae-Joo;Chang, Young-Hak
    • Proceedings of the KIPE Conference
    • /
    • 2012.11a
    • /
    • pp.177-178
    • /
    • 2012
  • 기존의 기계적인 제동시스템은 고장 및 오작동이 잦고 유지보수가 어렵다. 본 논문에서는 부스트 컨버터를 이용한 전기적인 제동 방법을 제안하였다. 200 [W] 풍력발전기를 대상으로 부스트컨버터 제작 및 동작 실험을 하였다. 풍력발전기와 부스트 컨버터를 연계하여 제동 실험을 한 결과 풍력발전기의 최대 정격출력전압 이상이 되는 지점에서 제동이 되는 것을 확인하였다.

  • PDF

2 Phase Interleaved Bidirectional DC-DC Converter for Inverter of Variable DC-Link Voltage using on Electric Vehicle (전기자동차용 인버터의 DC-Link 전압 가변을 위한 2상 인터리브드 양방향 DC-DC 컨버터)

  • Lee, Jae-Hyuk;Lee, Jung-Hyo;Won, Chung-Yuen
    • Proceedings of the KIPE Conference
    • /
    • 2010.07a
    • /
    • pp.25-26
    • /
    • 2010
  • 본 논문은 전기자동차용 인버터의 DC-Link 전압 가변을 위한 2상 양방향 DC-DC 컨버터의 제어 기법을 제안한다. 제안된 DC-DC 컨버터는 2-스위치 Buck-Boost 컨버터를 병렬구성 하여 전기자동차의 높은 출력에 대응하였으며 출력단 다이오드를 스위치로 교체하여 회생동작을 가능하게 하였다. 이를 시뮬레이션을 통하여 제어알고리즘의 가능성을 확인하였다.

  • PDF

Study on the Optimal Control Method of the Boost Converter (부스트 컨버터의 최적 제어기법 연구)

  • Hwang, Kyu-Il;Kim, Il-Song
    • Proceedings of the KIPE Conference
    • /
    • 2017.07a
    • /
    • pp.353-354
    • /
    • 2017
  • 본 연구에서는 전압승압형 컨버터로 동작하는 부스트 컨버터의 최적 제어기법에 대해 서술한다. 부스트 컨버터를 상태평균화 모델을 이용하여 전달함수를 구한 다음, Root Locus와 Bode Plot을 이용하여 시스템 요구사항(Requirement)을 만족시키는 제어기 설계 방법을 제안한다.

  • PDF

Single-phase inverter with bridgeless boost converter (브릿지리스 부스트 컨버터를 사용한 단상 인버터)

  • Kim, Tae-Hun;Lee, WooCheol
    • Proceedings of the KIPE Conference
    • /
    • 2017.07a
    • /
    • pp.170-171
    • /
    • 2017
  • 본 논문은 브릿지리스 부스트 PFC 컨버터를 사용한 저용량 단상 단방향 인버터 시스템에 관한 연구이다. 단상 PFC 인버터 시스템의 고효율화를 위해 브릿지리스 부스트 컨버터를 사용하였고 브릿지리스 부스트 컨버터의 CRM 모드로 동작하는 제어기를 제안하였다. 제안된 제어기를 브릿지리스 부스트 PFC 인버터 시스템에 적용하여 시뮬레이션으로 검증하였다.

  • PDF

Boost Push-Pull type resonant converter (승압형 Push-Pull type 공진형 컨버터)

  • Yang, Gi-Yeon;Park, Sung-Jun;Lim, Sang-Kil;Park, Byoung-Wo;Lee, Hwa-Chun
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.7-8
    • /
    • 2012
  • 본 논문에서는 저전압 대전류 입력의 DC/DC컨버터에서 과도한 전류 스트레스를 부담하는 변형된 Push-Pull type 컨버터를 제안한다. 제안된 컨버터는 변압기에 병렬로 권선과 스위치를 구성하며 L-C공진을 통해 소프트스위칭을 실현한다. 이를 시뮬레이션 및 실험을 통해 검증하였다.

  • PDF

High Efficient Single-Stage Boost-Flyback PFC Converter Without Additional Snubber Circuit (보조 스너버 회로가 없는 고효율의 1단 부스트-플라이백 역률개선 컨버터)

  • Yang, Jae Won;Do, Hyun Lark
    • Proceedings of the KIPE Conference
    • /
    • 2015.07a
    • /
    • pp.153-154
    • /
    • 2015
  • 본 논문에서는 보조 스너버 회로가 없는 고효율의 1단 부스트-플라이백 역률개선 컨버터를 제안한다. 제안된 컨버터는 높은 역률을 위한 부스트 역률개선 셀과 전기적 절연을 위한 플라이백 DC-DC 모듈로 구성된다. 입력전력의 일부분은 출력단으로 직접 전달되기 때문에 효율이 증가한다. 그리고 누설인덕터의 에너지가 DC링크 캐패시터에 흡수되기 때문에 별도의 스너버 회로가 필요하지 않다. 제안된 컨버터는 이론적 해석과 100[W]하드웨어 시작품을 제작하여 검증하였다.

  • PDF