• Journal of the East Asian Society of Dietary Life
• /
• v.4 no.3
• /
• pp.41-49
• /
• 1994

This study was intended to investigate the effects of nutritional, physical and environmental conditions on the bone status of 102 pre and post menopausal women living in Ulsan area. The results of this study are summarized as follows : when subjects were classified into two groups by bone status, there were significant differences in age, calcium index, serum estrogen and physical activity between two groups. Average daily calcium intake of subjects was 682.9 (149.2)mg, which is almost same as RDA, but 41.1% of the subjects consumed calcium below RDA. Calcium index(p<0.05), serum estrogen(p<0.001), physical activity(p<0.001) of poor bone group were significantly lower than those of good bone group. Although there was not a significant difference between bone status and other influential factors, such as family type, skip meal, alcohol drinking, smoking and BMI, each has been shown to have an effect, if slight, on the bone status.

• International Journal of Oral Biology
• /
• v.49 no.2
• /
• pp.27-33
• /
• 2024

Diabetes, a chronic hyperglycemic condition, is caused by insufficient insulin secretion or functional impairment. Long-term inadequate regulation of blood glucose levels or hyperglycemia can lead to various complications, such as retinopathy, nephropathy, and cardiovascular disease. Recent studies have explored the molecular mechanisms linking diabetes to bone loss and an increased susceptibility to fractures. This study reviews the characteristics and molecular mechanisms of diabetes-induced bone disease. Depending on the type of diabetes, changes in bone tissue vary. The molecular mechanisms responsible for bone loss in diabetes include the accumulation of advanced glycation end products (AGEs), upregulation of inflammatory cytokines, induction of oxidative stress, and deficiencies in insulin/IGF-1. In diabetes, alveolar bone loss results from complex interactions involving oral bacterial infections, host responses, and hyperglycemic stress in periodontal tissues. Therapeutic strategies for diabetes-induced bone loss may include blocking the AGEs signaling pathway, decreasing inflammatory cytokine activity, inhibiting reactive oxygen species generation and activity, and controlling glucose levels; however, further research is warranted.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.5
• /
• pp.420-424
• /
• 2011

Allomatrix (Wright Medical Tech, Inc., Arlington, Tenn, USA), is a newly designed, injectable putty with a reliable demineralized bone matrix (DBM), derived from human bone. The compound contains 86% DBM and other bone growth factors such as bone morphogenic protein (BMP)-2, BMP-4, insulin-like growth factor (IGF)-1, and transforming growth factor (TGF)-${\beta}1$. It has excellent osteoinduction abilities. In addition, DBM is known to have osteoconduction capacity as a scaffold due to its collagen matrix. This product contains a powder, which is a mix of DBM and surgical grade calcium sulfate as a carrier. A practitioner can blend the powder with calcium sulfate solution, making a putty-type material which has the advantages of ease of handling, better fixation, and no need for a membrane, because it can function as membrane itself. This study reports the clinical and radiographic results of various guided bone regeneration cases using Allomatrix, demonstrating its strong potential as a graft material.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.119-130
• /
• 2008

Absorbable atelo-collagen sponge $TERUPLUG^{(R)}$, Termo Co. Tokyo, Japan) is inserted in the extraction wound where alveolar bone is exposed. It protects wounds and promotes the formation of granulation. This is made of atelo-collagen, to minimize antigenicity, which is cross-linked by heat treatment for biocompatibility. $TERUPLUG^{(R)}$ consists of between 85 and 95 % of collagen type I and between 5 to 15 % of collagen type III. The raw material for the collagen is derived from bovine skin. It features a sponge block design and is shaped for easy insertion in the extraction wound. This study was designed to find out the bone healing capacity of $TERUPLUG^{(R)}$. We implanted $TERUPLUG^{(R)}$ (experimental group I) and $TERUPLUG^{(R)}$ with rhBMP-2 (experimental group II) in the rabbit cranium defect and then histologically analysed the specimen. The results were as follows. 1. In the 4 weeks, a lot of the newly formed collagen fibers around material of the experimental group I implanted $TERUPLUG^{(R)}$ were observed. But, in the experimental group II implanted $TERUPLUG^{(R)}$ with rhBMP-2, a little of newly formed collagen fibers around material were observed. The cell proliferating activity and apoptosis of the experimental group I, II was positive in and around the implanted material. 2. In the 8 weeks, the amount of newly formed and matured bone in the experimental group II was more observed than the experimental group I and control group. The results of this study indicate that absorbable atelo-collagen sponge ($TERUPLUG^{(R)}$) is relatively favorable bone void filler with biocompatibility and has the better bone healing capacity in case of application with rhBMP-2.

• Archives of Craniofacial Surgery
• /
• v.23 no.5
• /
• pp.205-210
• /
• 2022

Background: Nasal bone fractures are the most common type of facial bone fracture, but are under-studied in adults above 65 years of age. Therefore, we investigated the epidemiology and patterns of nasal bone fractures among older adults in comparison to different age groups. Methods: This retrospective study included 2,321 nasal bone fracture patients who underwent surgery at our hospital from January 2010 to December 2017. The patients were classified by age as preschoolers, school-age children, young and middle-aged adults, and the elderly. We performed pairwise comparisons between elderly patients and each other age group in terms of sex, cause of injury, and fracture type. Results: The 2,321 nasal bone fracture patients included 76 elderly patients (50 men [65.8%] and 26 women [34.2%]). In these patients, the two most common injury causes were falling or slipping down (n= 39; 51.3%) and road traffic accidents (n= 19; 25.0%). According to the Stranc and Robertson classification, the most common force vector was lateral, and plane 2 fractures with lateral forces predominated. Conclusion: The elderly showed similar patterns of nasal bone fractures to those observed in young and middle-aged adults, but significant differences from preschoolers (in the injury vector and plane of fracture) and from school-age children (in the sex ratio and plane of fracture). However, elderly patients presented significantly different epidemiological characteristics compared to the other three groups. Therefore, it is necessary to improve the quality of life of the elderly and prepare for the upcoming super-aged society by taking steps to reduce the incidence and severity of fractures. Possible options for doing so include strengthening individual-level safety factors and expanding the social safety net for the elderly.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.188-193
• /
• 2009

Purpose: Several authors reported about the post - traumatic nasal aesthetic complications. However, the study for functional or intra - nasal complications has been reported not enough. The aim of this study is to observe the incidence of intranasal synechia. Methods: We reviewed the data from 401 consecutive patients with nasal bone fracture from september 2006 to December 2007. We enforced evaluation with preoperative CT in all patients but postoperative CT within complicated patients. We classified the nasal bone fracture according to the anatomy and severity of fracture. Type I is nasal tip fracture(15%, n = 59), Type II is simple lateral without septal injury(38%, n = 152), Type III is simple lateral with septal injury(23%, n = 92), Type IV is closed comminuted(20%, n = 82), Type V is open comminuted or complicated(4%, n = 16). We studied 98 patients with nasal bone fracture who had postoperative symptoms or undergone postoperative endoscopic evaluation. And then we evaluated the postoperative endoscopic finding and nasal synechal formation after operation. Results: The incidence of intranasal synechiae was 15%(n = 62). According to the endoscopic findings, the incidence of intranasal synechiae was 10%(n = 6) in Type I, 8%(n = 12) in Type II, 16%(n = 15) in Type III, 24%(n = 20) in Type IV, and 56%(n = 9) in Type V. Additionally, the incidence of subjective nasal obstruction and olfactory dysfunction is 18%(n = 72) and 13%(n = 51). But the incidence of symptomatic synechiae of nasal obstruction and olfactory dysfunction is 92%(57/62) and 55%(34/62). Conclusion: We identified relatively high prevalence of nasal obstruction and olfactory dysfunction in nasal synechiae. Based on the results of this study, intranasal synechiae really caused airway obstruction(92%). Our data showed significant relationship between intranasal synechiae and severity of the fracture, because of increasing mucosal handling and destructive closed reductional procedures. First of all, education of delicate procedure regarding this subject should be empathized accordingly.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.263-290
• /
• 1997

Homogenization technique is employed to investigate the series of stress analyses of mandible for three different types of dental implants. This technique helps to make proper material model of bone and analyze such a non homogeneous structure at the level of individual microstructural unit. The stress analyses with homogenization technique show much higher stress level in the sponge bone, compared to those of conventional FEM. It also manifested that even a minor lateral force results in crucial stresses in the dental implant system and that the macroscale model should take the shape and size after real mandible to produce reasonable solution in the analyses of dental implant systems. The shapes of dental implants simulated in this study are rectangular-cross-sectioned type, hemi-sphere rooted type, and wedge type implant. The stress states of mandible with hemisphere rooted type implant and wedge type implant show similar levels, while those with sectioned rectangular implant results in higher stresses. It is suggested that the distance between the implant tip and cortical bone be kept far enough to prevent stress concentrations in the mandible.

• Journal of Korea Multimedia Society
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2016

In this paper, we propose a method of measuring bone mineral density in a peripheral-type clinical X-ray CT using a phantom, and we propose a method of classifying osteoporosis using bone mineral density and bone structure parameters together. It segments the trabecular bone region and cortical bone region for the six sections of the phantom and calculates the average HU value of the segmented regions. By using these values, it derives an expression converting HU value to bone mineral density. It segments trabecular bone of 1 cm region in the end part of distal radius and extracts the bone mineral density and structural parameters for the trabecular bone region. We extracted bone mineral density and structural parameters for the 18 subjects each of normal and osteoporotic group. We carried out classification experiments using three classification methods; SAD, SVM, ANN. The sensitivity, specificity, accuracy, positive predictive value, negative predictive value, likelihood ratio of the classification was improved in the order of ANN, SVM and SAD. Also, The sensitivity, specificity, accuracy, positive predictive value, negative predictive value, likelihood ratio of the classification was improved when we use the bone mineral density and structural parameters together.

• YAKHAK HOEJI
• /
• v.53 no.4
• /
• pp.206-216
• /
• 2009

3-Hydroxy-3-methylglutaryl coenzyme A reductase inhibitors (Statins) are potent inhibitors of cholesterol biosynthesis. Cholesterol-lowering therapy using statins significantly reduces the risk of coronary heart disease. Various discovery of statins as bone anabolic agents has spurred a great deal of interest among both basic and clinical bone researchers. In-vitro and some animal studies suggest that statins increase the bone mass by enhancing bone morphogenetic protein-2 (BMP-2)-mediated osteoblast expression. Clinical and animal test results of statins focusing on the prevention and treatment of bone fractures was collected. Three independent literature searches were performed by using from January 1, 2002 to September 2008 for clinical and animal test results. Search term included statins, HMG-CoA reductase inhibitors, pleiotropic effects, fracture, osteoporosis and clinical and animal test. No consensus has been reached whether clinical use of statins has beneficial effects on bone health, partly due to lower statin concentrations because of first-pass metabolism by the liver. Experimental use of statins as stimulators of bone formation suggests that they may have widespread applicability in the field of orthopaedics. With their combined effects on osteoblasts and osteoclasts, statins have the potential to enhance resorption of synthetic materials and improve bone ingrowth. In conclusion, The use of statins in the prevention and treatment of bone fractures requires further study. But observational studies suggest that statins for decreasing bone fractures including osteoporosis have to be considered local direct administration like transdermal or subcutaneous type over oral adminstration.