• Research in Community and Public Health Nursing
• /
• v.24 no.2
• /
• pp.236-244
• /
• 2013

Purpose: This study was to investigate lifestyles and identify factors influencing the bone mineral density (BMD) among employees in a community. Methods: Data were collected from 199 employees. Their lifestyles and BMIs were measured with a self-report questionnaire. As for their BMDs, their calcanei were measured with Quantitative Ultrasound. Results: Assessing their BMDs with reference to the WHO standards, 52.8% of the subjects' calcaneus BMDs were normal and 44.2% showed osteopenis, 3.0% showed osteoporosis. Age (odds ratio=1.05, p=.029), exercise (odds ratio=.31, p=.006) and the number of eating meals per day (odds ratio=1.97, p=.046) were significant factors influencing the subjects' BMDs. Conclusion: Strategies to emphasize exercise and dietary habits in employees are important for improving their bone mineral density. Programs for improving bone mineral density based on life cycle need to be developed.

• Journal of the Korean Dietetic Association
• /
• v.21 no.3
• /
• pp.181-193
• /
• 2015

This study investigated anthropometric and biochemical characteristics, nutrient intakes, and bone density of Korean elderly men (over 65 yrs). Data on bone density and anthropometric (height, weight, waist circumference, body mass index and blood pressure) and biochemical (total cholesterol, high-density lipoprotein (HDL)-cholesterol, low-density lipoprotein (LDL)-cholesterol, triglyceride and hemoglobin) characteristics, nutrient intakes, and nutrient density were obtained from the Fifth Korea National Health and Nutrition Examination Survey (KNHANES, 2008~2011). Subjects were categorized into smoking and non-smoking groups, and smoking groups were divided into three groups by smoking period (under 20 yrs, 21~40 yrs and over 41 yrs). Serum triglyceride concentrations of the smoking group aged 21~40 yrs were higher than those of other groups (P<0.01), whereas other biochemical factors were not different. Intake ratios of energy, protein, phosphorus and sodium in subjects were over 100% of Dietary Reference Intake for Koreans (KDRI). Nutrient densities according to intakes of thiamin, riboflavin, and niacin per 1,000 kcal were significantly different among the groups (P<0.05). Bone density of subjects decreased according to smoking period (T-score of total femur in non-smoking group -0.3108, and -0.2918, -0.4941, -0.6847 in smoking group, respectively). Ratio of osteoporosis was 38.1% in the non-smoking group and 44.4%, 51.1%, and 64.0% in the smoking group, respectively. The findings of the present study show that smoking may be associated with bone health, higher ratio of osteoporosis, and low nutrient density in elderly men. Therefore, practical and systematic non-smoking programs are required to improve the bone density of elderly men as well as maintain healthy bone levels and desirable lifestyle.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.892-895
• /
• 2005

This study investigated changes of mechanical characteristics in the trabecular and cortical bone of the lumbar vertebrae of the ovariectomised(OVX) rat. In previous researches, there were many studies for morphology of osteoporotic bones based on Micro-CT (Micro - Computed Tomography). However, there were few studies for detecting and tracking changes of mechanical characteristics in the trabecular bone and cortical bone of the lumbar vertebrae for the OVX rat. For this study, one female Sprague-Dawley rat was used: an OVX rat. The 4th lumbar of the OVX rat was utilized as a specimen. Detecting and tracking changes of mechanical characteristics could be investigated in the trabecular and cortical bone of the lumbar vertebrae for an OVX rat using In-vivo Micro-CT. An OVX rat was scanned at week 0 (just before surgery), at week 4, and week 8 after surgery. Micro finite element(${\mu}\;FE$) analysis was used to investigate mechanical characteristics in the trabecular and cortical bone of the lumbar vertebrae for an OVX rat.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3781-3788
• /
• 2014

This study examined the age-related bone mineral density (BMD), accumulated bone loss rate (ABLR) at different skeletal sites in Korean men using the data from the Korea National Health and Nutrition Examination Survey (KNHANES)(the 1st (2010), 2nd (2010) and the year at the 5th survey). The cubic regression model was found to be the best for describing the age-related changes in BMD. The lumbar spine, total hip, femoral neck, trochanter, Ward's triangle in the bone mineral density difference were analyzed by ANOVA. The peak BMD was at 20-24 years at the lumbar spine, total hip, femoral neck, trochanter, Ward's triangle, and the 75-79 years of age group had the highest Accumulated Bone Loss Rate. Therefore, intensive management will be necessary for men over 75 years, and a diagnosis of osteoporosis in Korean men should be made according to The International Society for Clinical Densitometry; ISCD.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.511-514
• /
• 1997

The objective of this study is to propose a finite element based design of the dental implant replacing unction and shape of natural teeth. For this, geometric actors were varied to investigate stress distribution of the alveolar bone around dental implant. In this study, the results were obtained based on the theory of linear elastic, with geometrically axisymmetric assumption. Geometric actors determining implant shape are ranged as 0.2mm-0.6mm, 0.04mm-0.1mm, 0.46mm-0.84mm or height of thread, radius of curvature of thread, and pitch, respectively. The stresses in the alveolar bone caused by biting force playa major role in determining implant stability. Especially, the stress concentration in the cortical bone causes bone resorption and finally makes the implant unstable. Therefore, the stress distributions were investigated on the side of the alveolar bone focusing on the area of cortical bone. The maximum von Mises stress was found to increase up to 6% as the height of thread increases, while its value was to decrease to 19% when the radius of curvature increase within the assigned ranges. For the variation of pitch, the larger size of pitch results in greater maximum von Mises stress when the length of the implant under consideration is fixed. The existence of the neck below the shoulder did not affect the stress distribution in the region of alveolar bone. However, the stresses on the side of the implant near the neck were found to be different by 20% approximately. Therefore, the neck can provide the stability of the implant against continuing biting movement. As a conclusion, the finite element based study shows a potential in designing the dental implant systematically.

• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.105-113
• /
• 2005

The purpose of this study is to evaluate the effect of loading at three different occlusal surface position of the gold alloy crown on the stress distributions in surrounding bone, utilizing 3-dimensional finite element method. A three dimensional finite element model of an implant with simplified gold alloy crown and supporting bone was developed for this study. A oblique or vertical load of 100 N was applied at the following position at each FE model : 1) center of occlusal surface, 2) a point on the buccal side away from center of occlusal surface (COS) by 2.8mm, 3) a point on the lingual side away from COS by 2.8mm. In the results, Minimum von Mises stresses under vertical load or oblique load of 100N were about 6MPa at the center of occlusal surface and about 40MPa at the point on the buccal side, respectively. From the results we could come to the conclusion that occlusive loading position could be an important factor for establishment of structural safety of supporting bone.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3229-3234
• /
• 2016

Background: Bone mineral density (BMD) is a lifetime marker of estrogen in a woman's body and has been associated with increased breast cancer risk. Nonetheless the actual association is still debatable. Furthermore, estrogen is very crucial in maintaining human bone density and gradually decreases over age. A systematic search was conducted to assess any association of BMD with breast cancer risk factors among premenopausal and postmenopausal women. Materials and Methods: Review identification was performed through databases searching on MEDLINE, CINAHL and SCOPUS and 19 qualified studies were elected. The keywords used were "bone mineral density", "breast cancer", and "breast density". Results: A total of 19 articles showed variation with the majority of the studies focused on postmenopausal and a few focused on premenopausal women. Overall there was no concensus on effects. Conclusions: An enormous effort is being undertaken by researchers to prove that BMD might be one of the significant risk factors for breast cancer.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.2
• /
• pp.63-67
• /
• 2012

Calcium density in human bones decreases as people are getting older due to the interior or exterior environmental factors. Bone aging forms osteoporosis. And this can bring out various spine fractures which develops a complications. Thus the prediction of seniliy is one of the important factors in spine diseases. Once spine aged, diverse fractures occur such as compression fracture and micro fracture. Side images of the spine by the digital radiography (DR) were prepared, and pixel arbitrary unit with Image J was measured from one spot in the lumbar bone part. By calculating pixel arbitrary unit of the simple contrast, it was obtained that the value of pixel arbitrary unit decreased as seniliy of bones increased. By simply applying Image J to the seniliy of patient's spine, the seniliy of bones predicts the level of danger with only digital radiography(2D) image. consequently we show that Image J value of pixel arbitrary unit index for predicts the level of precaution of osteoporosis patient.

• Korean Journal of Adult Nursing
• /
• v.19 no.5
• /
• pp.80-91
• /
• 2007

Purposes: To identify the predictors of calcium intake behavior and examine the relationships among bone mineral density, osteoporosis knowledge, osteoporosis health belief, osteoporosis self efficacy and calcium intake behavior of postmenopausal osteoporosis patients. Methods: The subjects consisted of 94 patients. The measurement tools were osteoporosis knowledge test, osteoporosis health belief scale, osteoporosis self-efficacy and calcium intake frequency questionnaire. The data were analyzed using the SPSS WIN 11.0 program. Results: The bone mineral density of the lumbar were $0.75g/cm^2$, T-score -2.67 and the femur neck were $0.67g/cm^2$, T-score -2.30. There was statistically a significant correlation between calcium intake behavior and health motivation (r=0.449, p=0.000) among the osteoporosis health belief. In hierarchial multiple regression analysis, current spouse(12.8%) and health motivation(19.9%) of the osteoporosis health belief explained the 32.7% of variance in calcium intake behavior. Conclusion: Nursing intervention should be developed for increasing the calcium intake behavior through promoting health motivation for the postmenopausal osteoporosis women having no spouse currently.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.273-278
• /
• 2014

Bone density measurement use of diagnosis of osteoporosis and it is an important indicator for treatment as well as prevention. But errors in degree of precision of BMD can be occurred by status of patient, bone densitometer and radiological technologist. Therefore the author evaluated that how BMD changes according to the condition of the patient. As Lumbar region, which could lead to substantial effects on bone density by diverse factors such as the water, food, intentional bowels. We recognized a change of bone mineral density in accordance with the height of the water tank and in the presence or absence of the gas using the Aluminum Spine Phantom. We also figured out the influence of bone mineral density by increasing the water and food into a target on the volunteers. Measured bone mineral density through Aluminum Spine Phantom had statistically significant difference accordance with increasing the height of water tank(p=0.026). There was no significant difference in BMD according to the existence of the bowl gas(p=0.587). There was no significant difference in a study of six people targeted volunteers in the presence or absence of the food(p=0.812). And also there was no significant difference according to the existence of water(p=0.618). If it is not difficult to recognize the surround of bone in measuring BMD of lumbar bone, it is not the factor which has the great effect on bone mineral density whether the test is after endoscopic examination of large intestine and patient's fast or not.