• Journal of muscle and joint health
• /
• v.16 no.1
• /
• pp.5-12
• /
• 2009

Purpose: The purpose of this study was to investigate bone mineral density(BMD) and fear of falling and falls efficacy in the middle and old aged women over 50 years. Methods: The subjects consisted of 409 women. One-way ANOVA, Pearson's correlations and multiple regression were used to test the BMD, fear of falling and falls efficacy scale by using SPSSWIN 12.0. The BMD of the calcaneus were measured with peripheral dual energy x-ray absorptiometry(DEXA). Results: The average age was 63 years old and the average T-score was -3.21 in patient with osteoporosis, -1.72 with osteopenia, and .13 with normal. There were significant differences in the status of the BMD according to age(p=.000), height(p=.000), weight(p=.000), married status(p=.000), age of menarche(p=.002), and menopause(p=.002). The fear of falling was related with falls efficacy(r=-.247, p=.01), BMD(r=-.337, p=.01). Falls efficacy($\beta$=-.21, p=.000)and BMD($\beta$=-.26, p=.000) were predicting variables of fear of falling. The model explained 13% of the variance in fear of falling(F=27.38, p=.000). Conclusion: Fear of falling and falls efficacy were related with the bone mineral density. Falls efficacy and BMD may be useful for the predicting fear of falling for women in middle and old age. Further studies with assessment of fall-related risk-factors and a longitudinal study are necessary to assess with falls efficacy, and BMD with age.

• Journal of radiological science and technology
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2012

The purpose of this study is to provide preliminary data for bone disease prevention by examining the correlation between bone mineral density, and lifestyle and nutritional status of female shift workers, at general hospitals with an irregular life cycle. The subjects for this study were 232 female shift workers, over 30 years old, who worked at a general hospital more than 5 years. From the subjects, who understood the purpose of this study and decided to be participated, we measured serum albumin, total brotein, total cholesterol, hematocrit, hemoglobin, calcium, phosphorus from blood test, and obtained bone mineral density. To analyze the effectiveness of the variables for explanation power, we established the studied values as independent variables, bone minral density as a dependent variable. Exercise, the number of drinking, calcium, and phosphorus were selected as significant variables and the explanation power was 10.2%. The bone mineral density were significantly higher at the subjects who had exercise, higher calcium and phosphorus possession, and drank alcohol than the opposite cases. Regular exercise, and 1:1 intake of calcium and phosphorous were important to prevent osteoporosis for the subjects who were working three shifts which cause irregular lifestyle.

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.737-747
• /
• 2001

Regeneration of Periodontium with PRP does not only improve regeneration rate and density of bone but have a possibility to estimate faster healing process for soft tissue. And also, synthetic bone and xenogenic bone graft are effective on regeneration of periodontium. The purpose of this study is to evaluate the effectiveness of synthetic bone ($Biogran^{(R)}$) and xenogenic bone ($BBP^{(R)}$) grafts with the PRP technique on regeneration of periodontium. 52 Generally healthy Pt. who had pocket depth 5mm at any of 6 surfaces of the teeth were in the study at Dept. of Perio. in Dankook Dental Hospital. Open Flap was treated for 18 infra-bony pockets as control group, $Biogran^{(R)}$ with PRP was inserted for 25 infrabony pockets as first test group, and $BBP^{(R)}$ with PRP was inserted for 22 infrabony pockets as 2nd test group. Then evaluation was made after 3 and 6 months 1. 6 months after surgery, each difference of average probing pocket depth was $2.61{\pm}0.23$ for control, $3.40{\pm}0.30$ for 1st test, and $3.45{\pm}0.37$ for 2nd test group. 2. 6 months after surgery, each difference of clinical probing attachment level was $1.39{\pm}0.12$ for control, $2.88{\pm}0,24$ for 1st, and $2.86{\pm}0,27$ for 2nd test group. 3. 6 months after surgery, each difference of Maximal probing attachment level was $1.11{\pm}0.16$ for control, $3.28{\pm}0.30$ for 1st, and $3.27{\pm}0.35$ for 2nd test group. 4. There were significant differences for clinical change of each three group which were between average probing pocket depth and clinical attachment level of 3,6 months and minimal and maximal attachment level after 6 months 5. There were significant differences for average probing pocket depth which were only at control group and 2nd test group between 1 and 6months. For clinical attachment level and minimal and maximal proving attachment level, there was a significant difference after 6month of surgery. 6. There was no significant difference between two test groups for average probing depth, clinical attachment level, and minima1 and maximal probing attachment level. As the result, PRP with bone graft is very effective for regeneration of periodontium and there is no difference between xenogenic bone and synthetic bone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1737-1746
• /
• 2013

The Purpose of this study was to conduct the effects of the 12-weeks health education and exercise programs on body compositions, bone density, and blood lipid, and health behavior among middle-aged and aged women in rural areas. The number of participants was 33 women at the age of 40-75 from March 5 to May 31 in 2012. For statistical analysis, descriptive statistics, paired t-test and ANCOVA were used with SPSS WIN 12.0. The results were summarized as followings. First, body weight, BMI and % body fat decreased significantly. Second, serum total cholesterol, triglyceride and LDL-cholesterol level decreased significantly. Third, Bone density increased significantly. Forth, Health behavior and attitude were significant factors in exercise, alcohol and smoking. Therefore, it is necessary to provide individual programs of intensive aerobic and muscle exercise over 3 months and the community will have to provide systematic management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.257-264
• /
• 2013

The purpose of this study was to examine the weight bearing exercise effect on bone mineral density(BMD) and upper extremity function in the female stroke patients. The subject were 24 female stroke patients, randomly assigned to a weight-bearing group(n=12, WBG) and a control group(n=12, CG). The experiments were conducted for three times per week for eight weeks, radial BMD and MFT(Manual Function Test) of both groups were measured before the experiments and eight weeks after the beginning of the experiments. In conclusion, it was found that there was a significant increase of the weight-bearing group radial BMD and MFT score, The results suggest that weight bearing exercise is effective in improving BMD and upper extremity function, thus, can be utilized in stroke rehabilitation.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.5
• /
• pp.249-252
• /
• 2004

Effects of HA and TiN coating on the electrochemical characteristics of Ti-6AI-4V alloys for bone plates were investigated using various test methods. Ti-6AI-4V alloys were fabricated by using a vacuum induction furnace and bone plates were made by laser cutting and polishing. HA was made of extracted tooth sintered and then tooth ash was used as HA coating target. The TiN and HA film coating on the surface were carried on using electron-beam physical vapor deposition (EB-PVD) method. The corrosion behaviors of the samples were examined through potentiodynamic method in 0.9% NaCI solutions at $36.5\pm$$1^{\circ}C$ and corrosion surface was observed using SEM and XPS. The surface roughness of TiN coated bone plates was lower than that of tooth ash coated plates. The structure of TiN coated layer showed the columnar structure and tooth ash coated layer showed equiaxed and anisotrophic structure. The corrosion potential of the TiN coated specimen is comparatively high. The active current density of TiN and tooth ash coated alloy showed the range of about $1.0xl0^{-5}$ $A\textrm{cm}^2$, whereas that of the non-coated alloy was$ 1.0xl0^{-4}$ $A\textrm{cm}^2$. The active current densities of HA and TiN coated bone plates were smaller than that of non-coated bone plates in 0.9% NaCl solution. The pitting potential of TiN and HA coated alloy is more drastically increased than that of the non-coated alloy. The pit number and pit size of TiN and HA coated alloy decreased in compared with those of non-coated alloy. For the coated samples, corrosion resistance increased in the order of TiN coated, tooth ash coated, and non-coated alloy.

• Journal of Periodontal and Implant Science
• /
• v.43 no.1
• /
• pp.30-36
• /
• 2013

Purpose: Implant stability at the time of surgery is crucial for the long-term success of dental implants. Primary stability is considered of paramount importance to achieve osseointegration. The purpose of the present study was to investigate the correlation between the insertion torque and primary stability of dental implants using artificial bone blocks with different bone densities and compositions to mimic different circumstances that are encountered in routine daily clinical settings. Methods: In order to validate the objectives, various sized holes were made in bone blocks with different bone densities (#10, #20, #30, #40, and #50) using a surgical drill and insertion torque together with implant stability quotient (ISQ) values that were measured using the Osstell Mentor. The experimental groups under evaluation were subdivided into 5 subgroups according to the circumstances. Results: In group 1, the mean insertion torque and ISQ values increased as the density of the bone blocks increased. For group 2, the mean insertion torque values decreased as the final drill size expanded, but this was not the case for the ISQ values. The mean insertion torque values in group 3 increased with the thickness of the cortical bone, and the same was true for the ISQ values. For group 4, the mean insertion torque values increased as the cancellous bone density increased, but the correlation with the ISQ values was weak. Finally, in group 5, the mean insertion torque decreased as the final drill size increased, but the correlation with the ISQ value was weak. Conclusions: Within the limitations of the study, it was concluded that primary stability does not simply depend on the insertion torque, but also on the bone quality.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.5
• /
• pp.519-526
• /
• 2000

Osteoporosis has recently been recognized as a major health problem in the elderly population. The disorder is manifested as a loss of bone mass accompanied by structural alteration of bone and increased incidence of fracture. Mandible also may be affected. So, I evaluated panoramic views of 66 postmenopausal women for finding the possibility of useful diagnostic mandibular parmeters of osteoporosis. To know the correlationship between skeleton and mandible, the average of the bone mineral density of lumbar from 2nd to 4th by the dual energy X-ray absorptiometry(DEXA, LUNAR DPZ. USA), and age and mandibular parameters, that is, the number of residual teeth, alveolar ridge resorption ratio, panoramic mandibular index (PMI), mandibular cortical width (MCW), angular cortical thickness (ACT), ramus cortical thickness (RCT), morphology of mandibular inferior cortical (MIC) were compared. And I divided the all tested women to the osteoporotic group and non-osteoporotic group by the use of T-score -2.0, which was derived from skeletal bone mineral density (BMD). To find the correlationship of the each group with mandibular parameters, t-test and discriminant analysis were done. The results of the t-test were that all parameters were highly related with 2 groups (p<0.05). Especially ACT, MIC, age have had even higher correlationship than others (p<0.001). The results of the discriminant analysis by the use of these ACT, MIC and age were that the discriminant function was Z = -2.973+(-1.447)$\times$(ACT)+1.131$\times$(MIC score)+(0.052)$\times$(age), the cutting score was 0.257 and the classification accuracy was 84.8%. Therefore I suggest that the consideration of the angular cortical thickness (ACT), the age of patient and the morphology of mandibular inferior cortical(MIC) may help find the osteoporosis.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.134-139
• /
• 1999

In this study, PSII(plasma source ion implantation) was used to improve the biocompatibility of bone-anchored Ti implant. According to potentiodynamic anodic polarization test in deaerated Hank's solution, open circuit potential of ion implanted specimens were increased compare to that of unimplanted specimen ; besides, passive current density and critical anodic current density of ion implanted specimens were lower than unimplanted specimen.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.11-22
• /
• 2023

Bone densitometry is a disease in which bones are easily broken due to metabolic bone disease, and DXA is used as a clinical standard test. Although DXA is a good method with good accuracy and reproducibility, it is frequently subject to test errors in testing and result analysis and analysis. Therefore, it is important to recognize the error issues that radiologists should basically be aware of when performing bone density tests, prevent erroneous diagnoses and treatments resulting from the results, and reduce the unnecessary costs associated with them. aim. The inspection must be carried out if the quality control of the equipment is basically continuously performed well before the inspection. Before starting the examination, the patient's age, sex, race, weight, pregnancy status, and any foreign objects that can be removed should be checked, and the examination should be performed in the correct posture. In addition, it is important to analyze results consistently. Radiologists, who play the most important role in ensuring accurate examinations, need to be aware of the potential for errors in advance and develop the ability to deal with the potential for errors in each examination. For that reason, regular education is considered essential.