• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.146-149
• /
• 2002

It is reported that the mechanical properties of vertebral trabecular bone depend on the density and the mass of bones. Osteoporosis is a systemic skeletal disease caused by low bone mass and microstructure deterioration of trabecular bone. Silva and Gibson (1997) studied the treatment of age-related bone loss using drug therapy. Vertebroplasty is a minimally invasive surgery for the treatment of osteoporosis vertebrae. This procedure includes puncturing vertebrae and filling with Polymethylmethacrylate (PMMA). However, the relative effect of drug therapy and bone cement for osteoporosis treatment is not reported yet. In this study, several 2D models of human vertebral trabecular bone are analyzed by finite element method. The mechanical behaviors of the vertebral trabecular bone treated by the drug therapy and the bone cement are compared. This study shows that bone cement treatment is more effective strategy than drug therapy to prevent the degradation of bone strength.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2168-2177
• /
• 2006

The purpose of this investigation was to determine the specific fracture mechanics response of cracks that initiate at the stem-cement interface and propagate into the cement mantle. Two-dimensional finite element models of idealized stem-cement-bone cross-sections from the proximal femur were developed for this study. Two general stem types were considered; Rectangular shape and Charnley type stem designs. The FE results showed that the highest principal stress in the cement mantle for each case occurred in the upper left and lower right regions adjacent to the stem-cement interface. There was also a general decrease in maximum tensile stress with increasing cement mantle thickness for both Rectangular and Charnley-type stem designs. The cement thickness is found to be one of the important fatigue failure parameters which affect the longevity of cemented femoral components, in which the thinner cement was significantly associated with early mechanical failure for shot-time period.

• 대한골관절종양학회지
• /
• 제7권1호
• /
• pp.1-12
• /
• 2001

목적 : 아드리아마이신 함유 골시멘트의 국소 항암제 치료로서의 가능성을 알아보고자 실험을 실시하였다. 대상 및 방법 : Palcos R, LVC, CMW 3, Simplex P의 4종류 골시멘트에 아드리아마이신 2.5mg, 5mg, 25mg의 각각 다른 농도로 균일하게 섞은 후, 원주형 또는 납작한 형의 모양에 따른 아드리아마이신 용출 차이, ddH2O, 0.45% 식염수, 0.9% 식염수, 3% 식염수 등의 주위 환경에 따른 아드리아마이신 용출 차이를 연구하였다. 또한 용출된 아드리아마이신의 세포 독성을 알아보고자, 골육종 세포주 Saos-2를 골시멘트 단독, 각기 다른 3종류의 아드리아마이신 농도를 함유한 골시멘트와 같이 37 C, 5% $CO_2$ 조건하에서 가습 배양기내에서 배양을 실시하여, MTT assay 방법으로 세포 생존율을 확인하였다. 결과 : 납작한 모양이 원주형보다 아드리아마이신 용출이 많았고, 3%, 0.9%, 0.45%의 식염수 순으로 아드리아마이신 용출이 줄어 들었으며, CMW 3, Simplex P가 Palacos R, LVC보다 아드리아마이신 용출이 많았으며, 아드리아마이신 농도가 2.5mg, 5mg, 25mg 순으로 세포 독성은 각각 95%, 98%, 99%이었다. 결론 : 적절한 용량의 아드리아마이신을 골시멘트에 섞는다면, 용출된 아드리아마이신이 세포 독성을 가져 국소 항암제 치료 수단으로 이용 가능성을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1368-1372
• /
• 2003

PMMA which is used as the bone cement for vertebroplasty is able to be a supporter, as a fixing supporter role, for broken trabecular structure, caused by the compressed fracture of spine on aged osteoporosis. In this thesis, as experimenting apparent density of bone pieces, we have figured out support extent of Young's modulus as classifying the bone pieces injected PMMA and the others which are not. In case of low apparent density of PMMA in some bone, Young's modulus seems to be more supportable to bone. On the other hand, if apparent density of bones is normal, injection of PMMA is not very effective on improvement in Young's modulus of bone cement injection.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권4호
• /
• pp.197-206
• /
• 2015

This paper presents three-dimensional finite element method analyses of the distribution of equivalents stress of Von Mises. Induced around a cavity located in the bone cement polymethylmethacrylate (PMMA). The presences and effect of its position in the cement was demonstrated, thus on the stress level and distribution. The porosity interaction depending on their positions, and their orientations on the interdistances their mechanical behaviour of bone cement effects were analysed. The obtained results show that micro-porosity located in the proximal and distal zone of the prosthesis is subject to higher stress field. We show that the breaking strain of the cement is largely taken when the cement, containing the porosities very close adjacent to each other.

• Journal of Korean Neurosurgical Society
• /
• 제48권6호
• /
• pp.490-495
• /
• 2010

Objective : Bone cement augmentation procedures such as percutaneous vertebroplasty and balloon kyphoplasty have been shown to be effective treatment for acute or subacute osteoporotic vertebral compression fractures. The purpose of this study was to determine the efficacy of bone cement augmentation procedures for long standing osteoporotic vertebral compression fracture with late vertebral collapse and persistent back pain. Methods : Among 278 single level osteoporotic vertebral compression fractures that were treated by vertebral augmentation procedures at our institute, 18 consecutive patients were included in this study. Study inclusion was limited to initially, minimal compression fractures, but showing a poor prognosis due to late vertebral collapse, intravertebral vacuum clefts and continuous back pain despite conservative treatment for more than one year. The subjects included three men and 15 women. The mean age was 70.7 with a range from 64 to 85 years of age. After postural reduction for two days, bone cement augmentation procedures following intraoperative pressure reduction were performed. Imaging and clinical findings, including the level of the vertebra involved, vertebral height restoration, injected cement volume, local kyphosis, clinical outcome and complications were analyzed. Results : The mean follow-up period after bone cement augmentation procedures was 14.3 months (range 12-27 months). The mean injected cement volume was 4.1 mL (range 2.4-5.9 mL). The unipedicular approach was possible in 15 patients. The mean pain score (visual analogue scale) prior to surgery was 7.1, which decreased to 3.1 at 7 days after the procedure. The pain relief was maintained at the final follow up. The kyphotic angle improved significantly from $21.2{\pm}4.9^{\circ}$ before surgery to $10.4{\pm}3.8^{\circ}$ after surgery. The fraction of vertebral height increased from 30% to 60% after bone cement augmentation, and the restored vertebral height was maintained at the final follow up. There were no serious complications related to cement leakage. Conclusion : In the management of even long-standing osteoporotic vertebral compression fracture for over one year, bone cement augmentation procedures following postural reduction were considered safe and effective treatment in cases of non-healing evidence.

• 대한의용생체공학회:의공학회지
• /
• 제23권6호
• /
• pp.451-458
• /
• 2002

골다공증이란 골량의 감소에 의해 야기되며. 해면골 미세구조의 골밀도가 감소하는 질병이다. 약물치료(부갑상선 호르몬)법은 골소주의 두께 및 골의 강도를 어느 정도 증가시킬 수 있는 호르몬 치료법이다. 척추성형술은 골다공성 척추 압박 골절의 치료를 위하여 척추 해면골에 주사기를 통하여 골 시멘트를 주입하는 최소 침습적 수술법이다. 임상적으로 골 시멘트의 물성치에 영향을 미치더라도 점성 감소와 주입 시간 확보를 위해 중합비율을 변경하여 사용한다. 본 연구의 목적은 골 시멘트 중합비율 변경에 따른 척추 해면골의 역학적 특성을 알아보고자 한다. 본 논문에서 는 수정된 보로노이 도형을 이용하여 척추 해면골의 유한요소 모델을 생성하고, 골 시멘트의 중합비율(0.40~l.07$m\ell$/g)에 따른 척추 해면골의 강도회복 정도를 비교하였다. 또한 골다공증 치료에서 호르몬 치료와 골 시멘트 치료의 상대적인 영향을 비교 분석하였다. 분석결과 골 시멘트 치료모델의 탄성계수와 강도는 정상 상태의 약 50%로 회복되었으며, 이 값은 호르몬 치료 모델의 약 2배이다. 0.53$m\ell$/g의 중합비율에서 골 시멘트의 탄성계수와 강도가 최고이며 1.07$m\ell$/g의 중합비율에서 최소의 탄성계수와 강도(각각 42%와 49%)이지만 약물 치료보다는 더 효과적임을 알 수 있다. 척추성형술시 제작사에서 추천하는 중합비율과 다른 비율을 사용할 경우 골 시멘트의 물성치 감소뿐만 아니라 환자의 골 밀도에 따라서 해면골의 강도회복에 문제가 발생할 수 있다는 것을 알 수 있었다.

• Clinics in Shoulder and Elbow
• /
• 제20권1호
• /
• pp.42-45
• /
• 2017

One of the most important factors leading to a successful healing of rotator cuff tear is good bone quality to secure the suture anchor in the bone for a stable fixation. However, rotator cuff tear are commonly found in elderly patients, and their proximal humerus often shows osteoporosis or cystic lesions. Especially when the transosseous repair prevails for a torn rotator cuff, a weak metaphyseal cancellous bone is often the case, which associated with difficulty in stable fixation of the lateral row suture anchor. In this situation, we were able to augment the lateral row fixation with polymethylmethacrylate bone cement. Although there is a concern of disturbance in the blood flow and healing potential, our case showed good clinical results with respect to healing. If we suspect a weak fixation of the lateral row suture anchor, bone cement seems to be a good option for augmentation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.951-955
• /
• 2001

The experimental comparison between bonded and unbonded types stem-cement interface was carried out on axisymmetric stem-cement-aluminum model of the femoral component of a total hip replacement. Human femur was modeled in non-tapered and tapered($7.5^{\circ}$) aluminum hollow cylinders to emulate the diaphyseal and metaphyseal segments of the femur. For unbonded type, we tested stems with three different taper angles($5^{\circ},\;7.5^{\circ},\;10^{\circ}$). In every case, the cement-aluminum interface was designed to endure 8MPa shear strength. (a measured value at cement-bone interface) We tested aluminum models under axial loading for both cases. As an experimental result, it was found that unbonded stem sustained more axial load as bonded stem in both cases, diaphyseal and metaphyseal models. The unbonded types failed in cement mantle under axial compressive load, while the bonded ones failed in shear at cement-aluminum interface. These results suggest that a polished stem will sustain much higher axial load than a roughened stem. And a polished stem will make more stable cement-bone interface that may promote better osteosythesis around the stem.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.239-250
• /
• 2019

The insertion of femoral implants is the most important phase for surgeons, given the characteristics of the cement during its mixing phase, generating residual stresses of thermal origin that increase the different stresses induced in the bone cement. The aim of our study is to determine the different stresses that affect the cement and more particularly at the cement-implant interface for different temperatures, and to make a comparison with the cement at ambient temperature. It was concluded that, there are a large concentration of stresses in the proximal part of the cement. For normal stresses, the bone cement is affected by stresses of tension and compression due to the effect of polymerization and the contraction of the cement.