• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.1
• /
• pp.95-104
• /
• 2020

PURPOSE: A prospective study was conducted to investigate the correlation between the inspiration ability, bone mineral density, lumbar muscle strength, and muscular endurance for the national softball athletes in the national training center. METHODS: The general characteristics of study subjects, inspiration ability, bone mineral density, muscle strength, and muscular endurance data were analyzed using descriptive statistics. In addition, the Pearson product moment correlation was performed to investigate the correlation between the inspiratory capacity, bone mineral density, muscle strength, and muscular endurance. RESULTS: The inspiration, flow rates, and volume were not correlated with the bone mass and bone mineral density. Inspiration and the flow rates and volume were not correlated with the bone mass and bone mineral density. On the other hand, inspiration was correlated with the Extensor muscles (r=.464, p=.006) at an angular velocity of 60°/s and the flexors (r=.463, p=.006) and extensor muscles (r=.615, p<.001) at an angular velocity of 180°/s. The flow rate was also correlated with the extensor muscles (r=.444, p=.009) at an angular velocity of 60°/s and with flexor muscles (r=.432, p=.011) and extensor muscles (r=.589, p<.001) at an angular velocity of 180°/s. Finally, the volume was correlated at the extensor muscles at an angular velocity of 180°/s (r=.534, p=.001). CONCLUSION: The correlation between the inspiratory capacity, bone mineral density, muscle strength, and muscular endurance of softball athletes did not correlate with the bone mass and bone density. On the other hand, the lumbar muscle strength increased with increasing inspiratory capacity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.7
• /
• pp.994-1002
• /
• 2012

An experiment was carried out to determine the effect of age and caponization on the development blood and bone characteristics development in male country chickens in Taiwan. A total of two hundred 8-wk-old LRI native chicken cockerels, Taishi meat No.13 from LRI-COA, were used as experimental animals. Cockerels were surgically caponized at 8 wks of age. Twelve birds in each group were bled and dressed from 8 wks to 35 wks of age at 1 to 5 wk intervals. The results indicated that the plasma testosterone concentration was significantly (p<0.05) lower in capons after 12 wks of age (caponized treatment after 4 wks) than that of the intact males. The relative tibia weight, bone breaking strength, cortical thickness, bone ash, bone calcium, bone phosphorus and bone magnesium contents were significantly (p<0.05) higher in intact males, while capons had higher (p<0.05) plasma ionized calcium, inorganic phosphorus and alkaline phosphatase concentration. The plasma testosterone concentration, relative tibia weight, tibia length, breaking strength, cortical thickness, bone ash, calcium, and phosphorus contents of intact males chickens increased significantly (p<0.05) with the advance of age. In addition, the relative tibia weight of capons peaked at 18 wks of age, and declined at 35 wks of age. The bone ash, calcium and phosphorus content increased most after 14 wks of age in male native chickens in Taiwan. Also, tibia length and cortical thickness peaked at 22 wks of age. However, the peak of bone strength was found at 26 wks of age. These findings support the assertion that androgens can directly influence bone composition fluxes in male chickens. Caponization caused a significant increase in bone loss at 4 wks post treatment, which reflected bone cell damage, and demonstrated reductions in the relative tibia weight, breaking strength, cortical thickness, bone ash, calcium, phosphorus and magnesium contents, and increases in plasma ionized calcium, inorganic phosphorus and alkaline phosphatase concentration.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.289-300
• /
• 2010

Purpose : This study was to explore the effects of knee joint taping exercise on muscle strength, bone mineral density, pain and IGF-1 in blood of elderly women with knee Osteoarthritis. Methods : Thirty elderly women with knee osteoarthritis were divided into three groups: the taping with exercise group (n=10), the regular exercise group (n=10) and control group (n=10). Participants' muscle strength, bone mineral density, pain and IGF-1 in blood were measured three times : before exercise, after 6 weeks, and after 12 weeks. Results : Participants in both exercise (taping & non-taping) groups showed improvement in muscle strength, bone mineral density, pain and IGF-1 in blood after 6 and 12 weeks compared to before exercise. In particular, the taping exercise group had a greater effect on muscle strength than the regular exercise group. Conclusion : Both exercise programs considerably improved muscle strength, bone mineral density, reduced pain and IGF-1 in blood in elderly women with knee Osteoarthritis. The knee joint taping exercise is perhaps a better exercise to improve muscle strength than the regular exercise in treating elderly women with knee Osteoarthritis

• Korean Journal of Exercise Nutrition
• /
• v.25 no.2
• /
• pp.33-37
• /
• 2021

[Purpose] Sex hormones deficiency leads to dramatically bone loss in particular postmenopausal women. Royal jelly has anti-osteoporosis effect due to maintain bone volume in that condition. We hypothesized that royal jelly protein (RJP, a latent residue after extracting royal jelly) also prevents bone deficient in ovariectomized (OVX) female rats, the animal model of postmenopausal women. [Methods] Female Sprague-Dawley rats (n = 30, 6 weeks age old) were sham operated (Sham; sham operated group, n = 7), OVX control group (OC, n = 7), OVX with low RJP intake group (ORL, n = 8), and OVX with high RJP intake group (ORH, n = 8) during 8 weeks experimental periods. In the end point of this experiment, the bone samples (lumbar spine, tibia, and femur) were surgically removed under anesthesia. These bone samples were evaluated bone mineral density (BMD) and bone strength. [Results] BMD of lumbar spine in RJP intake groups (ORL, ORH) were higher than that in OC group (p < 0.05 and p < 0.01) in RJP intake volume dependent manner. BMD of tibial proximal metaphysis and diaphysis in RJP intake groups were also higher than these in OC group (p < 0.01 and p < 0.01 / p < 0.05 and p < 0.001). In addition, breaking force of femur in RJP intake groups were significantly increase compared with that in OC group (p < 0.001 respectively). [Conclusion] These findings indicate that RJP contribute to prevent sex hormone related bone abnormality.

• Imaging Science in Dentistry
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2007

Purpose : Bone mineral density (BMD) and bone microarchitecture are important determinants for bone strength. Recently micro-CT have provided possibilities for measuring a variety of structural indices to characterize bone microarchitecture. The objective of this study was to compare the BMD and micro-CT parameters with Young's modulus calculated by finite element analysis (FEA) for the evaluation of bone strength. Materials and Methods Bone specimens were obtained from the 18 female rabbits aged 16 weeks. Of those, 36 samples (right and left femur) were selected for 3D micro-CT analysis $(ANT^{TM},\;SKYSCAN,\;Belgium)$ and BMD by PIXlmus 2 (GE Lunar Co. USA). Five microstructural parameters of micro-CT, such as trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI) and degree of anisotropy (DOA) were studied. Young's modulus was obtained by software program (ANSYS 9.0, ANSYS Inc, Canonsburg, PA) based on micro-CT three dimensional images. Results : Young's modulus assessed by FEA correlated significantly with Tb.Th, BV/TV, BS/BV and SMI respectively. Young's modulus showed higher correlation with these rnicrostructural parameters of micro-CT than BMD. Microstructural parameters except DOA showed significant correlations within the examined group. Conclusion The microarchitectural parameters o( micro-CT and BMD represented some informations in the evaluation of bone strength assessed by FEA.

• Advances in biomechanics and applications
• /
• v.1 no.2
• /
• pp.95-109
• /
• 2014

Peri-acetabular bone ingrowth plays a crucial role in long-term stability of press-fit acetabular cups. A poor bone ingrowth often results in increased cup migration, leading to aseptic loosening of the implant. The rate of peri-prosthetic bone formation is also affected by the polar gap that may be introduced during implantation. Applying a mechano-regulatory tissue differentiation algorithm on a two-dimensional plane strain microscale model, representing implant-bone interface, the objectives of the study are to gain an insight into the process of peri-prosthetic tissue differentiation and to investigate its relationship with implant-bone relative displacement and size of the polar gap. Implant-bone relative displacement was found to have a considerable influence on bone healing and peri-acetabular bone ingrowth. An increase in implant-bone relative displacement from $20{\mu}m$ to $100{\mu}m$ resulted in an increase in fibrous tissue formation from 22% to 60% and reduction in bone formation from 70% to 38% within the polar gap. The increase in fibrous tissue formation and subsequent decrease in bone formation leads to weakening of the implant-bone interface strength. In comparison, the effect of polar gap on bone healing and peri-acetabular bone ingrowth was less pronounced. Polar gap up to 5 mm was found to be progressively filled with bone under favourable implant-bone relative displacements of $20{\mu}m$ along tangential and $20{\mu}m$ along normal directions. However, the average Young's modulus of the newly formed tissue layer reduced from 2200 MPa to 1200 MPa with an increase in polar gap from 0.5 mm to 5 mm, suggesting the formation of a low strength tissue for increased polar gap. Based on this study, it may be concluded that a polar gap less than 0.5 mm seems favourable for an increase in strength of the implant-bone interface.

• Journal of Nutrition and Health
• /
• v.36 no.7
• /
• pp.667-674
• /
• 2003

The study was performed to investigate the effects of isoflavone and/or grape seed oil supplementation on serum and liver lipid profiles and bone strength in ovariectomized female rats. Female Spraque-Dawley rats were assigned into 4 groups of ovariectomized (O), isoflavone (0.085 mg/100 g b.w/day) in ovariectomized rats, grape seed oil in ovariectomized rats and isoflavone and/or grape seed oil in ovariectomized rats. After 8 weeks, biochemical profiles of serum, liver and bone were analyzed. Total food intakes, body weight gains and FER (food efficiency ratio) were not statistically significantly different among groups. Total cholesterol, triglyceride and LDL-cholesterol levels in serum were decreased by fed of isoflavone and/or grape seed oils. However, crude lipid and total cholesterol contents in liver were not affect of isoflavone and/or grape seed oil. The hepatic glutathione contents were increased by isoflavone and/or grape seed oil fed. The hepatic glutathione-S-transferase activity in isoflavone and/or grape seed oil supplemented groups were higher than that O group. Bone (scapular and femur bone) dry weight, femur of max weight and bending strength were no significant difference among groups. Our finding suggest that isoflavone/grape seed oils might have potential role for serum lipid profiles improvement and bone strength in vivo.

• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.584-588
• /
• 2008

Porous hydroxyapatite(HA) and HA-coated porous $Al_2O_3$ possessing pore characteristics required for bone substitutes were prepared by a slurry foaming method combined with gelcasting. The HA coating was deposited by heating porous $Al_2O_3$ substrates in an aqueous solution containing $Ca^{2+}$ and ${PO_4}^{3-}$ ions at $65{\sim}95^{\circ}C$ under ambient pressure. The pore characteristic, microstructure, and compressive strength were investigated and compared for the two kinds of samples. The porosity of the samples was about 81% and 80% for HA and $Al_2O_3$, respectively with a highly interconnected network of spherical pores with size ranging from 50 to $250{\mu}m$. The porous $Al_2O_3$ sample showed much higher compressive strength(25 MPa) than the porous HA sample(10 MPa). Fairly dense and uniform HA coating(about $2{\mu}m$ thick) was deposited on the porous $Al_2O_3$ sample. Since the compressive strength of cancellous bone is $2{\sim}12$ MPa, both the porous HA and HA-coated porous $Al_2O_3$ samples could be successfully utilized as scaffolds for bone repair. Especially the latter is expected suitable for load bearing bone substitutes due to its excellent strength.

• Geomechanics and Engineering
• /
• v.12 no.6
• /
• pp.883-898
• /
• 2017

To eliminate the holding and gluing problems making the direct tensile strength test hard to be applied, a new method of testing specimens prepared using lathe machine to make the dog bone shape is assessed whether it could be applied to determine accurate direct tensile strength values of rock materials. A series of numerical modelling analyses was performed using finite element method to investigate the effect of different specimen and steel holder geometries. In addition to numerical modelling study, a series of direct tensile strength tests was performed on three different groups of rock materials and a rock-like cemented material to compare the results with those obtained from the finite element analyses. A proper physical property of the lathed specimens was suggested and ideal failure of the dog bone shaped specimens was determined according to the results obtained from this study.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.341-346
• /
• 1994

To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atel- ocollagen was produced. The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength.