• 멤브레인
• /
• 제2권1호
• /
• pp.36-36
• /
• 1992

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.65-70
• /
• 2002

본 연구에서는 로켓엔진에 사용되고 있는 2상 스테인리스강의 브레이징 접합성에 관하여 접합 현상과 기계적 강도의 두가지 측면의 고찰을 통하여 검증하였다. UNS32550을 모재로, MBF-50을 인서트금속으로 사용하여 브레이징 접합온도를 1473K, 1498K로 변화시키고, 접합 시간은 0~1.8ks로 변화시키면서 각 조건에서의 접합현상을 고찰한 결과, 접합부에서는 모재와 인서트금속간의 반응으로 인해 다양한 상이 생성되었다. 접합 초기에는 접합계면 및 접합부 근방의 모재에서 BN가 생성되고, 접합계면에서는 Cr질화물이 생성되어 접합 시간이 증가함에 따라 BN과 Cr질화물의 양이 감소하였다. 전단시험 결과 500MPa의 우수한 전단강도를 얻었다.

• 대한화학회지
• /
• 제31권6호
• /
• pp.486-490
• /
• 1987

$CCl_4$속에서 티오아세트산아미드(TA)와 몇가지 아미드(N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA) and N,N-dimethylpropionamide (DMP)) 사이의 수소결합이 TA의 N-C(S) 결합 주위의 부자유 회전에 미치는 영향을 nmr 분광학적인 방법으로 연구하였다. $CCl_4$분율이 증가할 때 TA의 $NH_2$기의 양성자 nmr 스펙트럼은 이중선으로 뚜렷하게 분리되었으며, 그 정도는 DMF < DMA < DMP순으로 증가하였다. 이런 현상을 TA와 아미드사이의 분자간 수소결합으로 설명하였다.

• Archives of Pharmacal Research
• /
• 제25권1호
• /
• pp.11-24
• /
• 2002

The antitumor antibiotic (+)-CC-1065 can alkylate N3 of guanine in certain sequences. A previous high-field $^1H$ NMR study on the$(+)-CC-1065d[GCGCAATTG*CGC]_2$ adduct ($^*$ indicates the drug alkylation site) showed that drag modification on N3 of guanine results in protonation of the cross-strand cytosine [Park, H-J.; Hurley, L. H. J. Am. Chem. Soc.1997, 119,629]. In this contribution we describe a further analysis of the NMR data sets together with restrained molecular dynamics. This study provides not only a solution structure of the (+)-CC-1065(N3- guanine) DNA duplex adduct but also new insight into the molecular basis for the sequence- specific interaction between (+)-CC-1065 and N3-guanine in the DNA duplex. On the basis of NOESY data, we propose that the narrow minor groove at the 7T8T step and conformational kinks at the junctions of 16C17A and 18A19T are both related to DNA bending in the drugDNA adduct. Analysis of the one-dimensional $^1H$ NMR (in $H_2O$) data and rMD trajectories strongly suggests that hydrogen bonding linkages between the 8-OH group of the (+)-CC-1065 A-sub-unit and the 9G10C phosphate via a water molecule are present. All the phenomena observed here in the (+)-CC-1065(N3-guanine) adduct at 5'$-AATTG^*$are reminiscent of those obtained from the studies on the (+)-CC-1065(N3-adenine) adduct at $5'-AGTTA^*$, suggesting that (+)-CC-1065 takes advantage of the conformational flexibility of the 5'-TPu step to entrap the bent structure required for the covalent bonding reaction. This study reveals a common molecular basis for (+)-CC-1065 alkylation at both $5'-TTG^*$ and $5'-TTA^*$, which involves a trapping out of sequence-dependent DNA conformational flexibility as well as sequence-dependent general acid and general base catalysis by duplex DNA.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.14-18
• /
• 2019

반도체의 전도성은 주로 케리어에 의해서 결정된다. 전도성이 높아지려면 케리어의 수가 많고 에너지 내의 트랩 준위를 만들어서 케리어들이 낮은 에너지로도 금지대역을 넘어설수 있도록 하는 도핑기법을 주로 사용한다. 케리어들은 결정질 결합구조를 갖으며, 계면불일치에 의하여 전도성이 떨어지는 경향도 있지만 대체적으로 고농도 도핑은 이동도를 높이는 대표적인 방법에 속한다. 하지만 비정질 결합구조에서도 전도성이 높아지는 현상이 나타나며, 본 연구에서는 트래핑현상과는 다른 터널링 현상에 의한 공간전하제한 전류가 흐르면서 전도성이 향상되고 이동도가 높아지는 현상에 대하여 관찰하였다. 비정질구조에서는 케리어수가 낮고 저항이 높아지며, 커패시턴스의 on/off 특성이 향상되면서 이동도가 높아지는 것을 확인하였다. ZTO 박막은 150도에서 열처리한 경우 커패시턴스의 on/off 특성이 향상되었으며, 충전과 방전하는 실험에서는, 충전과 방전되는 형상에 있어서 시간차이가 있었으며, n형과 p형의 구분이 없었으며, 공핍층과 같은 비정질 결합구조를 보여주었다. 비정질 결합구조는 전위장벽으로 볼 수 있으며, 전위장벽은 공간전하제한전류가 흐르게 되는 원천이기도 하며, 터널링현상에 의한 전도현상이 나타나는 원인이 된다. 따라서 비정질구조에서 이동도가 증가하는 현상이 나타났으며, 케리어가 희박함에도 불구하고 전도성이 증가하는 것을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제72권5호
• /
• pp.569-583
• /
• 2019

Tubular steel sections are widespread all over the world because of their strength and aesthetic appearance. Tubular steel members may exhibit local buckling such as elephant foot or overall buckling under extreme compression load. Recently, external bonding of fiber reinforced polymers (FRP) sheets for strengthening these members has been explored through experimental research. This paper presents three-dimensional nonlinear finite element analysis (FEA) to investigate the structural behavior of strengthening tubular steel members with FRP against local and overall buckling phenomena. Out-of-roundness and out-of-straightness imperfections were introduced to the numerical models to simulate the elephant foot and overall buckling, respectively. The nonlinear analysis preferences such as the integration scheme of the shell elements, the algorithm for solution of nonlinear equations, the loading procedure, the bisection limits for the load increments, and the convergence criteria were set, appropriately enough, to successfully track the sophisticated buckling deformations. The agreement between the results of both the presented FEA and the experimental research was evident. The FEA results demonstrated the power of the presented rigorous FEA in monitoring the plastic strain distribution and the buckling phenomena (initiation and propagation). Consequently, the buckling process was interpreted for each mode (elephant foot and overall) into three sequential stages. Furthermore, the influence of FRP layers on the nonlinear analysis preferences and the results was presented.

• 대한건축학회논문집:구조계
• /
• 제34권12호
• /
• pp.11-20
• /
• 2018

The purpose of this study is to investigate the seismic performance of exposed column-base plate strong-axis connections for small-sized steel buildings. Even though the seismic design for small-sized buildings became mandatory since Dec.2017, the arbitrary connection details in steel structure have been applied at the construction site, which is considered to be very insufficient to secure structural safety and stability considering the increased seismic risk. Therefore, a series of experimental test programs had been carried out to develop enhanced connection details in order to ensue the adequate seismic safety of small buildings. The hysteretic behavior of the exposed column-base plate connections commonly used in Korea seem to be very pure poor due to the "Rocking" phenomena between anchor plate and concrete by the residual plastic deformation of anchor bolts. A series of hysteretic tests were conducted to find the solution to overcome the "Rocking" phenomena of the exposed column-base plate connections, finally the stable seismic behavior was obtained by uisng at least 8 anchor bolts with good bonding strength to the protptype specimen.

• 한국재료학회지
• /
• 제10권10호
• /
• pp.665-670
• /
• 2000

실온에서 직접 접합된 실리콘 기판의 접합강도를 향상기키기 위하여 기존의 고온 로내 열처리법을 대체할 수 있는 선형 열처리법을 개발하였다. 한 개의 열원과 타원형 반사경으로 구성된 선형 열처리법은 접합면의 간격이 열처리 온도의 증가와 더불어 감소하는 특성과 온도 증가와 더불어 접합면에 생성된는 기체상의 밀도가 증가하는 현상을 응용하여 접합면의 기체상을 밀도차이를 이용하여 기판 외부로 방출시키는 방법으로 Si$\mid$$\mid$Si 기판쌍 및 Si$\mid$$\mid$$SiO_2/Si$ 기판쌍의 직접 접합에 적용하여 보았다. IR camera와 HRTEM으로 직접 관찰한 접합면은 실온에서 접합면에 침투한 외부 불순물에 의한 비접합 영역을 제외하고는 자제 생성된 기체상에 의한 비접합 영역은 나타나지 않았고 매우 깨끗한 접합계면을 나타내었다. 접합된 기판쌍을 Crack opening법과 인장시험법을 적용하여 접합 강도를 측정하였다. 접합 강도는 열처리 온도의 증가와 더불어 점차로 증가하였고 두 측정방법 모두 동일한 경향성을 나타내었다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.264-266
• /
• 2002

The absorption wavelength of the protonated retinal Schiff base can be controlled by the surrounding environment. An external anion is related to fine adjustment of the absorption wavelength. The addition of anion to retinochrome solution caused blue shift in spectra. The increase of the shift was dependent on the ion concentration. The large shift value was obtained as 20 nm at the saturated concentration of nitrate. The shift intensity for the nitrate addition exceeded that of chloride. Seemingly, it depends on the ionic strength or lyotropic character of the anion. However, neither of sulphate nor gluconate ion showed remarkable blue shift. These phenomena were accounted for with (1) delocalization of the positive charge in the conjugated polyene system, (2) ionic bonding strength between the counter ion (glutamate) and the proton, and/or (3) interaction of the added anion with the proton on Schiff base.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.425-430
• /
• 2002

The needs of the times, a cement plays an important roll in the materials field. So, in this research we would like to study on the properties of Photocatalytic Cement for waste gas reduction. The fundamental phenomena of the Photocatalytic Cement were observed by the NOx Analyzer, Bonding strength, SEM, Flow and Surface hardness(Pencil tester). As a result of this study, the Photocatalytic Cement used Photocatalytic powder, admixture and other materials can obtain its physical properties, also photocatalytic efficiency. If we have added a various experiment, we could have to develop the Photocatalytic Cement.