퇴적물(堆積物)의 형태(形態), 함수비(含水比) 및 저면전단응력(底面剪斷應力)(${\tau}_b$)이 미세퇴적물(微細堆積物)의 부상특성(浮上特性)에 미치는 영향을 연구하기 위해 순환식 개수로에서 부상실험(浮上實驗)을 하였다. 시료는 한국(韓國)의 서해안(西海岸)에 위치한 영광해역과 남동해안(南東海岸)에 위치한 영도해역에서 채취한 것을 사용하였다. 퇴적물(堆積物)의 종류 및 함수비의 크기에 따른 부상한계저면전단응력(浮上限界底面剪斷應力)(${\tau}_c$)이 유추되었다. 동일한 시료에 대해서 함수비(含水比)가 클 수록 상한계저면전단응력(浮上限界底面剪斷應力)은 감소하였으나, 부상량(浮上量)은 증가하였다. 퇴적물(堆積物)의 부상(浮上)은 퇴적물(堆積物)의 함수량(含水量)에도 크게 좌우되지만, 입자간(粒子間)의 결합력(結合力)(점참력(粘着力))을 특징짓는 퇴적물(堆積物)의 형태(形態)에도 강하게 지배되었다. 한 방향 흐름장에서 부상한계저면전단응력(浮上限界底面剪斷應力)은 파-흐름 공존장에서의 부상한계저면전단응력(浮上限界底面剪斷應力)보다 약 4배 이상 크게 나타났다. 저면전단응력(底面剪斷應力)이 작을 경우에는 실험초기(實驗初期)에 급부상(急浮上)한 후 시간이 경과할 수록 저면의 경화로 인해 부상량(浮上量) 어느 일정치에 가까와지고 있으나, 저면전단응력(底面剪斷應力)이 클 수록 시간의 경과에 따라 저변의 연약화로 인해 부상량(浮上量)도 계속적으로 증가하였다. 각(各) 실험(實驗)에 대한 초기(初期) 부하율(浮上率) $E={\alpha}_3({\tau}_b/{\tau}_c-1)^{\beta}$ (${\alpha}_3$, ${\beta}$ = 경험적 상수)을 평가하였으며, 동일한 시료에 대해서는 함수비(含水比)가 클 수록 ${\alpha}_3$와 ${\beta}$ 값이 증가하였다.
FRP-콘크리트 합성 바닥판은 압축에 강한 콘크리트를 상부에 위치시키고 인장에 강한 FRP를 하부에 위치시켜, FRP와 콘크리트가 갖는 장점을 극대화시킴으로서 내구성, 안전성 등을 두루 향상시킨 새로운 개념의 구조이다. 그러나 서로 다른 재질의 두 재료를 합성시키기 위한 방안으로서 연구 초기에 적용된 규사코팅 공법 외에 수직부착력을 향상시킬 수 있는 기계적 합성 방안을 고안하였다. 이렇게 고안한 합성 방안이 적용된 실제 사이즈의 바닥판 실험체를 제작하여 정적 및 피로반복실험을 수행하였다. 정적실험 결과 이 연구에서 제안한 합성 방안이 적용된 바닥판이 처짐 및 균열 등에 대해서 설계기준을 충분히 만족시켜 매우 우수한 성능을 나타내고 있었으며, 피로실험 결과 파괴하중의 50%로 200만회 가력한 후에도 처짐 및 균열 등에 대해 설계기준을 만족하고 있어 충분한 피로내구성을 확보하고 있는 것으로 나타났다. 이에 이 연구에서 제시한 규사코팅과 기계적 합성 방안을 동시에 적용한 합성 방안은 FRP-콘크리트 합성 바닥판에 대해 충분한 적용성을 갖고 있으며, FRP-콘크리트 합성 바닥판 설계시 제시한 설계조건들이 적절하게 이용될 수 있음을 확인하였다.
본 논문은 인장에서의 연성능력을 유지하면서도 구조물 적용시에 지속가능성을 확보할 수 있는, 지속가능한 SHCCs를 제조하기 위한 기초자료를 제공하고자 한다. 본 연구의 목적은 자원순환형 재료가 압축, 휨, 직접인장거동 등 SHCCs의 역학적 특성에 미치는 영향을 평가함과 동시에, 구조물의 개발 및 해석시 구성모델에 대한 기초자료를 제공하는 것이다. 규사, 시멘트, PVA 섬유의 치환재로써 순환잔골재, 플라이애시, PET 섬유가 각각 SHCCs 배합에 일부 치환되었다. 실험결과, 플라이애시는 PVA 섬유와 시멘트 매트릭스 간 화학적 부착력을 증가시켜 SHCCs의 휨 및 직접인 장성능을 증가시킬 수 있는 것으로 나타났다. 그러나 PET 섬유가 치환된 SHCCs는 압축에서는 기준시험체인 PVA2.0과 유사하였으나, 섬유 자체의 낮은 기계적 특성으로 인해 휨 및 직접인장성능에서는 매우 낮게 나타났다. 순환골재의 경우 기존 규사보다 큰 골재치수로 인해 SHCCs의 탄성계수를 증가시키는 것으로 나타났다. SHCCs의 성능을 유지하기 위해 설정된 목표치를 근거로 할 때, 플라이애시는 20% 이하, 순환잔골재는 50% 이하로 치환하는 것이 지속가능한 SHCCs 제조에 바람직할 것으로 판단되었다.
BACKGROUND: Recently, biomass conversion from agricultural wastes to carbon-rich materials such as biochar has been recognized as a promising option to maintain or increase soil productivity, reduce nutrient losses, and mitigate greenhouse gas emissions from the agro-ecosystem. This experiment was conducted to select an optimum conditions for enhancing the NH4-N adsorption capacity of rice hull activated biochar. METHODS AND RESULTS: For deciding the proper molarity of KOH for enhancing its porosity, biochars treated with different molarity of KOH (0, 1, 2, 4, 6, 8) were carbonized at 600℃ in the reactor. The maximum adsorption capacity was 1.464 mg g-1, and an optimum molarity was selected to be 6 M KOH. For the effect of adsorption capacity to different carbonized temperatures, 6 M KOH-treated biochar was carbonized at 600℃ and 800℃ under the pyrolysis system. The result has shown that the maximum adsorption capacity was 1.76 mg g-1 in the rice hull activated biochar treated with 6 M KOH at 600℃ of pyrolysis temperature, while its non-treated biochar was 1.17 mg g-1. The adsorption rate in the rice hull activated biochar treated with 6 M KOH at 600℃ was increased at 62.18% compared to that of the control. Adsorption of NH4-N in the rice hull activated biochar was well suited for the Langmuir model because it was observed that dimensionless constant (RL) was 0.97 and 0.66 at 600℃ and 800℃ of pyrolysis temperatures, respectively. The maximum adsorption amount (qm) and the bond strength constants (b) were 0.092 mg g-1 and 0.001 mg L-1, respectively, for the rice hull activated biochar treated with 6 M KOH at 600℃ of pyrolysis. CONCLUSION: Optimum condition of rice hull activated biochar was 6M KOH at 600℃ of pyrolysis temperature.
쌀 전분에 propylene oxide(PO)를 단계별(전분 공형분 대비 2-12%)로 20시간과 24시간 반응시켜 하이드록시프로필화 쌀 전분을 제조하고, 변성된 쌀 전분의 용해도, 팽윤력, RVA, DSC 특성을 연구하였다. 팽윤력은 일반 쌀 전분 보다 낮은 온도에서 증가되기 시작하였으나 높은 경향을 보였으며, 하이드록시프로필화 쌀 전분이 일반 쌀 전분보다 완만한 상승을 나타내었다. 용해도는 하이드록시프로필화 쌀 전분이 일반 쌀 전분보다 낮은 결과를 나타내었고 PO 함량이 높을수록 높아지는 결과를 보였다. RVA 분석결과 PO 함량이 높을수록 pasting temperature와 peak time이 낮아졌고 최고 점도는 하이드록시프로필화 쌀 전분이 일반 쌀 전분보다 낮고 holding strength는 높은 경향을 나타내고 breakdown의 경우 반응시간이 24시간이 20시간보다 낮은 경향을 보였으며 Setback은 24시간 반응시킨 처리구들이 일반 쌀 전분보다 낮은 것으로 나타났다. DSC분석결과 PO 함량이 높을수록 To, Tp, Tc, ${\Dalta}H$가 감소하였다. 따라서 하이드록시프로필화 쌀 전분의 경우 전분입자내의 intemal bond가 하이드록시프로필기에 의해 약해져서 호화가 쉽게, 즉 낮은 온도에서 일어나는 것으로 판단되었고 최대 팽윤력, breakdown에서 옥수수 전분과는 다른 결과를 나타내어 전분의 종류에 따라 같은 변성 처리라고 하더라도 다른 결과를 나타낼 수 있다는 사실이 확인되었다.
Statement of the problem. All-ceramic post-and-core restorations offer a number of advantages compared with systems that use metal build-ups. In certain clinical cases, however, fractures at the joint between the post and core build-up have been reported. Purpose. The objective, therefore, is to improve the joint between the post and the core build-up. Material and methods. Three different methods were used to prepare all-ceramic post-and-core restorations; pressing IPS Empress core build-ups to CosmoPost zirconia posts, cement-ing IPS Empress core build-ups to CosmoPost zirconia posts and Celay-milling of zirconia blanks. A series of ten restorations was prepared for each of the three methods. The post-and-core complexes were tested to failure with the load applied perpendicular to the post axis. The load and deflection at fracture were recorded. Results. The highest breaking load and highest deflection were recorded for the cementing technique with values of 25.3 N and $394{\mu}m$, respectively, The corresponding values for the pressed core build-ups and the milled zirconia core build-ups were 22 N and $301{\mu}m$, and 13 N and $160{\mu}m$, respectively. All the differences are statistically significant (p=0.05). Regarding the load-dependence of the deflection, the cemented core build-ups again demonstrated the highest value with $15.5{\mu}m/N$. The difference in the values of $13.6{\mu}m/N\;and\;13{\mu}m/N$ recorded for the pressed-on and milled core build-ups, respectively, were statistically insignificant. Conclusion. In regard to the high fracture resistance of zirconia post, adhesive cementing the core build-up to the post offers a viable alternative to the conventional pressing technique. The elastic bond between the rigid high-strength zirconia post and the core build-up presents an additional advantage.
최근 들어 우리나라에 이상한파가 자주 발생하고 있으며, 이로 인해 지반에서는 동상에 따른 도로, 철도, 사면과 같은 구조물을 대상으로 지반변형에 따른 문제가 야기되고 있다. 동상현상은 가장 대표적인 동토지반의 공학적 특성으로, 구조물 설계에 있어서 동착 및 크리프 현상과 함께 주요한 설계정수로서 고려된다. 그러므로 극한지 지반구조물 설계에 관한 연구를 위해서는 동상현상에 대한 기초적 연구가 선행되어야 한다. 이미 다양한 동상 관련 실험장비가 개발되어 연구에 활용되고 있지만, 기존의 동상 연구를 위한 실험장비들은 기초의 설계정수로서 동상현상을 분석하기에는 한계점이 나타난다고 판단된다. 국내에는 동상을 실험적 모사하기에는 필요한 장치와 냉동챔버의 고비용으로 시험방법 및 기준이 전무한 실정이다. 이에 본 논문에서는 다양한 방법으로 동결-융해를 모사할 수 있는 투명 온도제어형 삼축셀 을 소개하고자 한다. 새롭게 개발된 동결-융해 실험장치를 활용해 동상 실내실험을 수행하였으며, 본 장치를 활용한 실내실험법을 제안하고자 한다.
The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.
Purpose: This study evaluated the surface characteristics and bond strength produced using a novel technique for coating hydroxyapatite (HA) onto titanium implants. Methods: HA was coated on the titanium implant surface using a super-high-speed (SHS) blasting method with highly purified HA. The coating was performed at a low temperature, unlike conventional HA coating methods. Coating thickness was measured. The novel HA-coated disc was fabricated. X-ray diffraction analysis was performed directly on the disc to evaluate crystallinity. Four novel HA-coated discs and four resorbable blast medium (RBM) discs were prepared. Their surface roughnesses and areas were measured. Five puretitanium, RBM-treated, and novel HA-coated discs were prepared. Contact angle was measured. Two-way analysis of variance and the post-hoc Scheffe's test were used to analyze differences between the groups, with those with a probability of P<0.05 considered to be statistically significant. To evaluate exfoliation of the coating layer, 7 sites on the mandibles from 7 mongrel dogs were used. Other sites were used for another research project. In total, seven novel HA-coated implants were placed 2 months after extraction of premolars according to the manufacturer's instructions. The dogs were sacrificed 8 weeks after implant surgery. Implants were removed using a ratchet driver. The surface of the retrieved implants was evaluated microscopically. Results: A uniform HA coating layer was formed on the titanium implants with no deformation of the RBM titanium surface microtexture when an SHS blasting method was used. Conclusions: These HA-coated implants exhibited increased roughness, crystallinity, and wettability when compared with RBM implants.
1970 년대 이후, 우레탄 도막방수공법은 자외선에 강하고 탄성 및 수밀성이 뛰어나 지붕 및 지하바닥, 스포츠경기장 등에 널리 활용되고 있다. 그러나 옥상 및 지하공간은 미끄럼으로 인한 위험이 많고 다양한 외력으로 하자발생이 빈번하여, 미끄럼방지기능 및 내구성을 향상시켜야 하고 사용자의 편의성 및 심미적 측면의 기능성을 고려한 우레탄 도막방수공법의 개발이 절실하다. 따라서 기존 우레탄의 장점을 유지하고 성능 및 기능을 향상시킨 다양한 공법이 개발되고 있으며, 최근에 엠보스프레이 코팅시스템(Embo spray coating system)을 활용한 엠보탄(Embo-thane) 도막방수공법이 개발되었다. 본 논문은 엠보탄 도막방수공법의 노출 비노출 바닥재에 대하여 살펴보고 기존의 우레탄 도막방수공법과의 성능 및 기능에 대한 객관적 비교 분석을 실시하기 위하여 인장강도, 신장률, 부착성능, 내마모성, 미끄럼저항성능에 대한 실험적 연구를 실시하였다. 그리고 엠보탄 방수공법의 물리적 성능뿐만 아니라 공법의 설계적 측면을 고려한 평가기준항목 설정과, AHP(Analytic Hierarchy Process)기법을 활용한 VE(Value Engineering)분석을 실시하여, 엠보탄 도막방수공법이 기존의 우레탄 도막방수공법에 비교하여 성능 및 기능에 대한 개선정도를 성능점수(performance index)를 통하여 제시하였다. 또한, 불확실성이 고려된 결과에 대한 평가를 위하여 Monte Carlo Simulation기법을 활용하여 확률적 접근방법을 통한 신뢰도 분석을 실시하고자한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.