• Restorative Dentistry and Endodontics
• /
• 제33권6호
• /
• pp.545-552
• /
• 2008

본 연구의 목적은 NaOCl로 처리된 치수강 상아질에 total-etching adhesive system(single bond, 3M-ESPE, St Paul, MN, USA)을 적용할 때 미세인장결합강도에서 sodium ascorbate가 미치는 영향을 평가하는 것이다. 발치된 건전한 인간 대구치의 치수강 내면을 다음과 같이 처리하였다. 1군, 0.9% NaCl로 세척; 2군, 5.25% NaOCl로 세척; 3군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 1분간 적용; 4군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 1분간 적용하고 다시 10ml 물로 수세; 5군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 5분간 적용; 6군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 5분간 적용하고 다시 10ml 물로 수세; 7군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 10분간 적용; 8군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 10분간 적용하고 다시 10ml 물로 수세. 처리된 시편들은 total-etching adhesive system(Single bond)으로 처리한 후 composite resin(Z250)으로 충전하고, 미세인장강도를 측정하기 전 24시 간 동안 보관하였다. 분석 결과 NaOCl 처리 군(2군)은 다른 실험군들에 비해 유의성 있게 낮은 결합 강도를 보였다. NaCl 처리 군(1군)과 sodium ascorbate 처리 군(3-8군)은 유의성 있는 차이가 없었다. 이번 연구 결과는 NaOCl로 처리한 치수강 상아질의 Single bond에 대한 미세인장결합강도는 감소되며, 10% sodium ascorbate를 추가적으로 처리하였을 때 감소된 결합력이 회복됨을 보여주었다. Sodium ascorbate의 다양한 처리시간은 결합력에 영향을 미치지 않았다.

• 대한치과의사협회지
• /
• 제53권12호
• /
• pp.958-966
• /
• 2015

Objective: Sodium hypochlorite (NaOCl) decreases the bond strength of resin composite. The purpose of this study was to compare the effect of antioxidant and superficial dentin surface removal on the microtensile bond strength of NaOCl-treated dentin. Materials and Methods: Twenty non-carious human third molars were used in this study. The dentin surfaces were treated with 5.25% NaOCl for 10 min, followed either by treatment with 10% ascorbic acid or superficial dentin surface removal. Two-step self-etch adhesive and resin composite were used for restoration. The bonded specimens were subjected to the microtensile bond strength test. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey's test (p < 0.05). Results: The bond strength after removal of the superficial dentin surface following NaOCl irrigation was similar to that in the control group. The group treated with 10% ascorbic acid demonstrated significantly higher bond strength than the other groups. Conclusion: NaOCl irrigation-induced reduction in dentin bond strength could be recovered by either treatment with 10% ascorbic acid or simple removal of the superficial dentin surface.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.233-241
• /
• 2021

A series of three bench-scale experiments was performed to investigate the conversion of sodium metal to sodium chloride via reactions with non-metal and metal chlorides. Specifically, batches of molten sodium metal were separately contacted with ammonium chloride and ferrous chloride to form sodium chloride in both cases along with iron in the latter case. Additional ferrous chloride was added to two of the three batches to form low melting point consolidated mixtures of sodium chloride and ferrous chloride, whereas consolidation of a sodium-chloride product was performed in a separate batch. Samples of the products were characterized via X-ray diffraction to identify attendant compounds. The reaction of sodium metal with metered ammonium chloride particulate feeds proceeded without reaction excursions and produced pure colorless sodium chloride. The reaction of sodium metal with ferrous chloride yielded occasional reaction excursions as evidenced by temperature spikes and fuming ferrous chloride, producing a dark salt-metal mixture. This investigation into a method for controlled conversion of sodium metal to sodium chloride is particularly applicable to sodium containing elevated levels of radioactivity-including bond sodium from nuclear fuels-in remote-handled inert-atmosphere environments.

• Restorative Dentistry and Endodontics
• /
• 제34권6호
• /
• pp.515-525
• /
• 2009

본 연구에서는 치수강이 개방된 근관와동에 5.25% NaOCl용액을 각각 다른 시간 동안 적용시킨 뒤 접착레진에 의한 미세인장결합강도의 변화를 측정하였으며, 10% sodium ascorbate를 NaOCl 용액에 일정시간 노출시킨 상아질에 다시 10분 동안 적용하여 결합강도에 미치는 효과를 연구하고자 하였다. 연구결과 본 실험에서 상부 치수강 상아질과 하부 치수강 상아질에 대한 결합강도는 모든 실험군내에서 유의한 차이 (p > 0.05)를 보이지 않았다. 5.25% NaOCl 용액을 적용하지 않고 치수강 상아질에 접착시킨 대조군에 비해 20분간 적용시킨 실험군에서는 결합강도의 감소가 초래되었으나 통계적인 유의성 (p > 0.05)은 없었다. 그러나 5.25% NaOCl 용액을 40분과 80분 동안 치수강 상아질에 적용시킨 실험군에서는 대조군에 비해 유의하게 낮은(p < 0.05) 결합강도의 변화를 나타내었다. 5.25% NaOCl 용액을 40분동안 그리고 10% sodium ascorbate를 10분간 처리한 실험군에서는 유의한 결합강도의 회복을 나타내었다. 그러나 5.25% NaOCl 용액을 80분 동안 그리고 10% sodium ascorbate를 10분간 적용한 실험군에서는 대조군에 비해 통계적으로 유의한 차이(p < 0.05)를 보임으로써 여전히 결합강도가 회복되지 못하고 있음을 나타내었다. 5.25% NaOCl 용액을 5분간 적용한 뒤 10% sodium ascorbate를 10분간 적용한 실험군에서는 오히려 대조군에 비해 높은 결합강도(p < 0.05)를 보여줌으로써 높은 회복효과를 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제40권1호
• /
• pp.37-43
• /
• 2015

Objectives: Some antioxidants are believed to restore dentin bond strength after dental bleaching. This study was done to evaluate the influence of antioxidants on the bond strength of bleached bovine dentin. Materials and Methods: Thirty incisors were randomly assigned to 10 groups (two unbleached control and eight bleached groups:immediate bonding IB, 4 wk delayed bonding DB, 10% sodium ascorbate treated SA, 10% ${\alpha}$-tocopherol treated TP groups). Teeth in half of groups were subjected to thermal stress, whereas the remaining groups were not. Resin-dentin rods with a cross-sectional area of $2.25mm^2$ were obtained and microtensile bond strength was determined at a crosshead speed of 1 mm/min. Fifteen specimens were prepared for SEM to compare the surface characteristics of each group. The change in dentin bond strength from thermal stress and antioxidant treatment was evaluated using two-way analysis of variance (ANOVA) and Sheffe's post hoc test at a significance level of 95%. Results: The control group exhibited the highest bond strength values, whereas IB group showed the lowest value before and after thermocycling. The DB group recovered its bond strength similar to that of the control group. The SA and TP groups exhibited similar bond strength values with those of the control and DB groups before thermocycling. However, The TP group did not maintain bond strength with thermal stress, whereas the SA group did. Conclusions: Applying a 10% sodium ascorbate solution rather than 10% ${\alpha}$-tocopherol solution for 60 sec is recommended to maintain dentin bond strength when restoring non-vitally bleached teeth.

• 약학회지
• /
• 제50권1호
• /
• pp.40-46
• /
• 2006

Square wave voltammetric (SWV) and cyclic voltammetric (CV) behaviors of cefotaxime sodium and ceftriaxone sodium have been investigated in the potential range between -0.10 V and -1.30 V using the phosphate buffers of various pH values ($2.00{\sim}9.10$). Two main peaks observed were irreversible and protons were involved in their electrochemical reductions. The first peaks of these cephalosporin antibiotics are due to the reduction of the azomethine double bond in the methoxyimino group of the side chain at position 7. The second peaks of cefotaxime sodium and ceftriaxone sodium are related to the reductions of the ${\Delta}^3$ double bond and the dioxo moiety of the side chain at position 3, respectively. The calibration curve of cefotaxime sodium in the concentration range between $1.0{\times}10^{-7}M$ and $1.0{\times}10^{-5}M$ yielded the linearity with the correlation coefficient of 0.9998 when the first peak of the antibiotic in a phosphate buffer of pH 3.02 was measured at the conditions of frequency of 120 Hz and pulse height of 50 mV by SWV. The present fast, simple and accurate SWV assay method was applied to determine cefotaxime sodium in the commercial antibiotic powder of injection.

• 공업화학
• /
• 제5권1호
• /
• pp.114-120
• /
• 1994

DCI (dichlorolsocyanuric acid sodium salt)에 의한 PNPDPP (p-nitrophenyldiphenylphosphate)의 미셀 내에서의 분해 반응을 pH 8.0 borate 완충용액에서 속도론적으로 살펴보았다. 양이온성 계면활성제인 CTAC (cetyltrimethylammonium chloride) 또는 CTAB (cetyltrimethylammonium bromide)를 첨가하면 반응은 빠르게 촉진되었으며, 특히 CTAB의 경우는 DCI의 N-Cl 결합이 N-Br 결합으로 전환되어 반응이 진행되었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.207-213
• /
• 1997

The computational scheme on a irradiation temperature of U-10Zr fuel was established considering porosity formation, bond sodium infiltration and constituent redistribution. Thermotransport theory was adapted to model the redistribution phenomenon. As a results, the bond sodium seems to be logged in the outer region of fuel slug. The main driving force for constituent redistribution appears to be the Zr solubility change along to radial position of the fuel. It is evident that the heat of transport also has some contribution to the redistribution.

• 구강회복응용과학지
• /
• 제23권4호
• /
• pp.283-292
• /
• 2007

Two-step or one-step bonding systems generally inhibit curing process of dual-cured core build-up resin composite for their adhesive acidity. In addition this dual-cured core build-up resin composite can be applied to dentin of pulp chamber and root at the time that complete the endodontic treatment. The purpose of this investigation was to determine the influence of sodium hypochlorite on rnicrotensile bond strength of dual-cured core build-up resin composite. Extracted human molars were horizontally sectioned with 1mm thickness using low speed diamond saw. After the sectioned specimens were divided into 8 groups, adhesive systems (Clearfil SE-Bond, Prime&Bond NT[2-step, 1-step], Adper Prompt L-Pop) were then applied with or without sodium hypochlorite pretreatment. The treated specimen was filled with dual-cured core build-up resin composite (Luxacore, DMG corp., German). Then light cured for 40 seconds and soaked in $37^{\circ}C$ water bath for 24 hours. After the treated specimen was grinded with 1mm width and measured rnicrotensile bond strength by testing machine. Additionally 8 teeth were prepared for SEM evaluation. The results were as follows. : NaOCl treated groups generally had lower rnicrotensile bond strength but did not show any difference statistically except Adper Prompt L-Pop. When the teeth were treated by NaOCl, though the difference of applied adhesive system, it had no statistically significant difference within the NaOCl treated groups except the relation of between ClearFil SE-Bond adhesive system and Adper Prompt L-Pop adhesive system. In the SEM evaluation, NaOCl treated groups presented relatively long resin tags and incomplete hybrid layer formation generally.

• Restorative Dentistry and Endodontics
• /
• 제39권2호
• /
• pp.95-103
• /
• 2014

Objectives: This study evaluated the effect of three antioxidizing agents on pullout bond strengths of dentin treated with sodium hypochlorite. Materials and Methods: Root canals of 75 single-rooted human teeth were prepared. Fifteen teeth were irrigated with normal saline for a negative control group, and the remaining 60 teeth (groups 2 - 5) with 2.5% NaOCl. The teeth in group 2 served as a positive control. Prior to post cementation, the root canals in groups 3 - 5 were irrigated with three antioxidizing agents including 10% rosmarinic acid (RA, Baridge essence), 10% hesperidin (HPN, Sigma), and 10% sodium ascorbate hydrogel (SA, AppliChem). Seventy-five spreaders (#55, taper .02, Produits Dentaires S.A) were coated with silica and silanized with the Rocatec system and ceramic bond. All the prepared spreaders were cemented with a self-adhesive resin cement (Bifix SE, Voco Gmbh) in the prepared canals. After storage in distilled water (24 h/$37^{\circ}C$), the spreaders were pulled out in a universal testing machine at a crosshead speed of 1.0 mm/min. Pull-out strength values were analyzed by one-way ANOVA and Tukey's HSD test (${\alpha}$ = 0.05). Results: There were significant differences between study groups (p = 0.016). The highest pullout strength was related to the SA group. The lowest strength was obtained in the positive control group. Conclusions: Irrigation with NaOCl during canal preparation decreased bond strength of resin cement to root dentin. Amongst the antioxidants tested, SA had superior results in reversing the diminishing effect of NaOCl irrigation on the bond strength to root dentin.