This study provide basic data to develop a dress form reflecting body shape characteristics by age and to produce a 3D body form in a virtual fitting program. A comparative analysis was conducted on the size, section shape, and slope of side shape of the modeling form by the sizing of the basic female avatar in CLO 3D, one of the 3D apparel CAD programs and the body form of women in their 20s-50s by body shape in the 6th Size Korea (2010). First, all the differences were formed similarly in the direct measurements between the 3D avatar and the body form were within 1 mm. Second, in a comparison of the section form of the avatar and body form in Size Korea, the avatar was formed in straight body shape and did not reflect a spinal curvature according to age. As a result of an examination of the items with a difference over 5° in the slope of side shape, there were angle differences in numerous body shapes in the angles of the side upper abdomen, side upper back, and side upper bust, and the avatar's bust shape was expressed more flatly compared to body form. It will be possible to produce an avatar that can adequately reflect body shape characteristics by adding detailed length and angle items by the region like waist back length and front length in producing the avatar reflecting body shape characteristics, instead of a standard body shape.
The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.
Journal of the Korea Society of Computer and Information
/
v.24
no.12
/
pp.101-108
/
2019
The purpose of this study was to investigate the subjective evaluation and the characteristics of each type of maternal self-awareness. It was to provide the basic data necessary for the development of clothing that can improve the satisfaction of the body shape of pregnant women. This study was conducted with Q methodology, and was performed for pregnant women over 6 months. Analysis was done with QUANL program. The recognition types of body shape of pregnant women was analyzed as three types: thin limbs and central hemispherical abdominal body shape, under abdomen protruding body shape, and thick upper arm and central abdomen protruding body shape. The thin limbs and central hemispherical abdominal body shape were considered to be normal, with the lowest BMI index before pregnancy. And the limbs were thin and the other parts were not overweight, but recognized that only the belly came out. The under abdomen protruding body shape was overweight with the highest BMI index before pregnancy. In addition to the circumference of the chest and hips, the body was gaining weight and was perceived to have a belly drooping down. The thick upper arm and central abdomen protruding body shape recognized that the middle part of the abdomen protruded like the first type, but it was different from the first type because the upper arm was thickened. In the future study, it would be a meaningful study to compare and analyze the difference with the recognition body of this study through analyzing the actual body shape of pregnant women.
The purpose of this study was to examine the factors affecting subjective body shape perception among female university students. This research conducted a survey targeting 121 female university students. The collected data were analyzed by Pearson's Correlation, Multiple Regression using SPSS/Win 23.0. were identified as factors influencing on subjective body shape perception in female university students. As the results of regression analysis, sociocultural attitudes towards appearance, body cathexis, self-esteem, BMI demonstrated significant effects on subjective body shape perception. and these are significantly predicted 46.8% of subjective body shape perception. The factor of the greatest impact on subjective body shape perception is sociocultural attitudes towards appearance. In order to positively change body shape perception, it is necessary to help them perceive their body shape as it is, accept the actual body shape, and have a specific way to be satisfied with their body shape.
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
2001.05a
/
pp.90-95
/
2001
A continuum-based shape design sensitivity analysis (DSA) method is presented for the acoustic radiation from thin body. The normal derivative integral formulation is employed as an analysis formulation and differentiated directly by using material derivative to get the acoustic shape design sensitivity. In the acoustic sensitivity formulation, derivative coefficients of the structural normal velocities on the surface are required as the input. Thus, the shape design sensitivities of structural velocities on the surface with respect to the shape change are also calculated with continuum approach. A simple disk is considered as a numerical example to validate the accuracy and efficiency of the analytical shape design sensitivity equations derived in this research. This research should be very helpful to design an application involving thin body and to change its acoustic characteristics.
Journal of the Korean Society of Clothing and Textiles
/
v.28
no.7
/
pp.983-994
/
2004
The aim of this study is to provide fundamental data on the development of ready-to-wear clothes appropriate for the body types of elderly women. The study was conducted targeting 318 elderly women over 60 years of age whose fields of action were colleges for the elderly, sports centers, or business sites in Seoul and the neighboring districts. A total of 44 features in the upper body were used for the anthropometric measurement and analysis using anthropometry and photometry. The results of the study are as follows: 1. Somatotypes were classified into three types according to a cluster analysis using height and weight indices. Type 1 is the group with long and undersized upper body and straight body type since the face of the upper body is long relative to height and width, girth and depth are the smallest relative to weight, the breasts are somewhat fat, with a small extent of drooping and a straight back. Type 2 is the group that is considered fat relative to the body, has broad shoulders, drooping breasts with a wide space between them, and a back-bent upper body. Type 3 is the group that has a bent shape, the shortest upper body relative to height, and showing average obesity factors. 2. Indices of height and weight were used for factor analysis, cluster analysis, and discriminant analysis in order to classify upper body somatotype according to shape while excluding size factors of elderly women's upper body somatotype. The same method was used to compare and verify the result according to the absolute measurement and height index. Classification based on height and weight indices demonstrate that such somatotype classification minimizes the personal equation of body shape and it induces better classification based on shape as the results showed the highest cumulative sum of square(CUSUM) at 78.38% while six factors showed the smallest result and the hit rate for the classified three groups showed the highest result at 95.30%.
The purpose of this study was to analyze the somatotypes of women in the early 20's, which were likely to deform due to bad posture in growth period. Accordingly, bodies of women aged 20 to 24, whose growth stopped, were measured directly and indirectly, and factors related to body shapes were extracted, body shapes were categorized based on the data, and the characteristics of each body shape were analyzed. As a result, 10 factors related to body shapes were extracted in the factor analysis, and body shapes were categorized into 6 types. Type 1 was the volume of body that was big and the longest; and the general frame was large. The straight body shape with small back protrusion; the shoulder is relatively thick and the width of the shoulder was normal. Type 2 was the volume of body that was the biggest and the upper body was the longest; the general frame was of average height. The forward body shape with the back flat; the shoulder was very thick, wide, and serious leaning forward. Type 3 was a body that was thin and the shortest. The sway-back body shape with big curvature at the back; the shoulder was thin, narrow, and straight. Type 4 was a body that was short stature, and the general frame was of average build. The forward body shape with the most serious back protrusion; the shoulder was normally thick, narrow, and straight. Type 5 was a group with small body, and the lower body and general frame are long. The sway-back body shape with protrusion at the upper shoulder and the sides leaning backward; the shoulder was thin, wide, and leaning forward. Type 6 was a thin and short body; and the general frame was small. The lean-back body shape with the smallest back protrusion and leaning backward; the shoulder was thin, narrow, and leaning backward. Characteristics of the classified body shapes can be used in producing ready-made clothes, and it is hoped that there will be follow-up studies on clothing pattern design and production based on this result.
Journal of the Korean Society of Clothing and Textiles
/
v.33
no.8
/
pp.1262-1272
/
2009
The study is classifies the figures of obese women aged 20-50 with an over 25 BMI from the data of the fifth Size Korea in 2005. As the result of conducting the factor analysis for segmenting the shape, Factor 1, Factor 2, Factor 3, and Factor 4 are respectively derived as the factor on a volume, the factor on the size of the vertical direction, the factor on the shoulder region, and the factor on the body length balance. As the result of conducting the cluster analysis using 4 factors (scores extracted from the analysis of factor analysis) the body type of obese women was classified into four types. The name of shape was specified by combining 'P' (an abbreviation of petite) that indicated the height (smaller than 155cm) among the height names of KS standard, 'R' (abbreviation of regular) that indicated the height (155cm-165cm) and the body characteristics. Type 1 had the longest length, and normal circumference, thickness, and width but with the developed shoulder. Type 1 was classified as a robust, 'Plus-RH'. Type 2 had the middle height, the shortest length of the upper part, a relatively-long length of the lower part of body. Type 2 shows the characteristics of a small body that was classified as 'Plus-PI'. The most obese body was Type 3 that had the normal length and shoulder size but showed the longest length of the upper part of the body; it was classified as 'Plus-PO'. Type 4 as the small shape had a potbelly and showed the characteristics of the shortest body classified as 'Plus-Pb'.
Journal of the Korea Fashion and Costume Design Association
/
v.21
no.3
/
pp.13-24
/
2019
Adolescence is a transitional stage of physical development which occurs during the period from puberty to adulthood. Going through this period, various parts of an adolescent's body grow at different rates, leading to different body shapes and proportions when compared to adults. Therefore, this study aimed to investigate the body sizes and shapes of junior high school boys from ages 13-15 based on body measurement items that are used as the basis for school uniform designs including jackets, shirts, and pants. For this, the study sought the basic data needed to develop body shapes and school uniform patterns for junior high school boys using the data from the 6th Size Korea Survey (2010). Specifically, it provided basic data for the development of school uniform patterns that fit well through the classification of bodies into particular types. After extracting body shape componen a cluster analysis using ANOVA was performed. According to the factor analysis conducted to determine body shape components, 5 factors were obtained as follows: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: characteristics of horizontal size, Factor 5: shape of the upper body with a variance of 82.62%. To classify junior high school boys' body shape was determined using various characteristics, and a cluster analysis was performed with the variables obtained by the factor analysis. For this, body shapes were classified into 3 different types: Type 1 accounted for 33.4%, with a total of 463 subjects. This type was a tall, long body individual with the smallest bulk and size. Type 2 accounted for 22.7%, with a total of 315 subjects. This type was large in bulk and horizontal size, but the lowest in height and length. Type 3 accounted for 43.9%, with a total of 610 subjects. This type was close to average in terms of horizontal size, length, and height. To develop well-fitting school uniforms for junior high school students, there should be further studies on changes in body shape and their associated causes. The study results will be available as basic data for comparing branded school uniform patterns for junior high school boys and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.
This study utilized data to classify and characterize the body types of plus-size adult men aged in their 30s and 40s. Diversity is an important factor in the era of inclusive design, and discussion about size diversity to include the plus size should be accommodated. Data from 493 adult men classified as obese (with a World Health Organization criterion ≥25 BMI) were used for the analysis. The results of the study are as follows. Six independent factors were extracted using factor analysis for cluster analysis, which were then classified into five types. Type 1 (29.01%) was identified as body type I with the smallest degree of obesity. Type 2 (15.4%) was identified as body type Y with wide shoulders and a thin waist. Type 3 (14.2%) was the largest body volume (body type O), while the fourth (19.27%) identified as body type H has a large height and upper body. Lastly, type 5 (22.11%) has a long lower body and a slim abdomen, referred to as body type X. This study presents a basis for the development of various clothing sizes utilizing the body shape characteristics of plus-size men in their 30s and 40s. Follow-up research is needed to develop patterns for plus size men and to design various products.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.