• Title/Summary/Keyword: Body scheme

Search Result 501, Processing Time 0.027 seconds

A High Data Rate Medical Implant Communication System Transmitter for Body Implantable Devices (체내이식용 기기를 위한 고속 MICS 송신기 구현)

  • Im, Jun-Ha;Jung, Yun-Ho;Kim, Jae-Seok
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.48 no.4
    • /
    • pp.24-31
    • /
    • 2011
  • A high data rate Medical Implant Communications Service (MICS) transmitter for implantable medical devices (IMD) is proposed. An orthogonal frequency division multiplexing (OFDM)-based multicarrier scheme is used to overcome the data rate limitation caused by the narrow bandwidth of 300 kHz. The proposed transmitter utilizes multiple MICS channels simultaneously, supporting increased data rate. To satisfy the MICS regulation, various schemes are applied including optimized subcarrier allocation and inverse fast Fourier transform (IFFT) architecture, and additional sidelobe suppression technique. Simulation results show that the proposed transmitter can support a maximum data rate of 4.86 Mbps, which is more than ten times faster than the previous systems.

A Design of Ultra-sonic Range Meter Front-end IC (초음파 거리 측정회로용 프론트-엔드 IC의 설계)

  • Lee, Jun-Sung
    • 전자공학회논문지 IE
    • /
    • v.47 no.4
    • /
    • pp.1-9
    • /
    • 2010
  • This paper describes a ultrasonic signal processing front-end IC for distance range meter and body detector. The burst shaped ultrasonic signal is generated by a self oscillator and its frequency range is about 40[kHz]-300[kHz]. The generated ultrasonic signal transmit through piezo resonator. The another piezo device transduce from received ultrasonic signal to electrical signals. This front-end IC contained low noise amplifier, band pass filter, busrt detector and time pulse generator and so on. This IC has two type of new idea for improve function and performance, which are self frequency control (SFC) and Variable Gain Control amplifier (VGC) scheme. The dimensions and number of external parts are minimized in order to get a smaller hardware size. This device has been fabricated in a O.6[um] double poly, double metal 40[V] High Voltage CMOS process.

Control of Plume Interference Effects on a Missile Body Using a Porous Extension (다공확장벽을 이용한 미사일 동체에 대한 플룸간섭 현상의 제어)

  • Young-Ki Lee;Heuy-Dong Kim
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.7 no.4
    • /
    • pp.33-38
    • /
    • 2003
  • The Physics of the Plume-induced shock and separation Particularly at a high Plume to exit pressure ratio and supersonic speeds up to Mach 3.0 with and without a passive control method, porous extension, were studied using computational techniques. Mass-averaged Navier-Stokes equations with the RNG $\kappa$-$\varepsilon$ turbulence model were solved using a fully implicit finite volume scheme and a 4-stage Runge-Kutta method. The control methodology for plume-afterbody interactions is to use a perforated wall attached at either the nozzle exit or the edge of the missile base. The Effect of porous wall length on plume interference is also investigated The computational results show the main effect of the porous extension on plume-afterbody interactions is to restrain the plume from strongly underexpanding during a change in flight conditions. With control, a change in porous extension length has no significant effect rut plume interference.

Calculation of the Wave Resistance of SWATH Ships using Rankine Source Panel Methods (Rankine 소오스 패널법을 이용한 소수선면 쌍동선의 조파저항계산)

  • Chun, H.H.;Lee, M.H.;Joo, Y.R.;Jang, H.S.
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.34 no.2
    • /
    • pp.27-38
    • /
    • 1997
  • This paper is concerned with the calculation of the wave resistance for SWATH ships based on a low order Rankine source panel method. Two types of free surface boundary conditions, Dawson type (double model approximation) and Kelvin type (free stream approximation) are used. For the free surface boundary calculation, an analytic differentiation is employed instead of implementing a finite difference scheme. Then, the radiation condition is satisfied by, so called, the panel shift method. The numerical results using the above two methods are compared with those using the thin ship/modified slender body approximation and also with the experimental results. The SWATH models considered are a single strut SWATH and a twin strut SWATH together with the variations of two demihull separation distance. In order to prove the validity of the program developed, the numerical calculations for a Wigley mono hull and Wigley twin hulls are compared with the available experimental results.

  • PDF

Hierarchical Network Synchronization of STAR Network based on TDMA (STAR 망 TDMA시스템의 계층적 망동기 방식)

  • Yoon, Juhyun
    • Journal of the Korea Society of Computer and Information
    • /
    • v.19 no.1
    • /
    • pp.77-84
    • /
    • 2014
  • In this paper, we propose the hierarchical network synchronization scheme that is backward compatible for the existing commercial system, efficient for total system performance, and whose hardware modification is minimized. This system performance is, the relationship among bandwidth efficiency, complexity and MODEM performance, and superiority of network system applicability. The proposed structure can remedy the high hardware complexity and the lower accuracy of network sychronization that the existing satellite communication terminal system in the star network based on TDM/MF-TDMA of DVB-S2/RCS standards has. Besides, It has high efficiency in view of cost and system performance if the system designed for satellite broadcast requires system upgrade. In the body section, its hardware complexity and system performance of the proposed algorithm is analysed theoretically and treated with the related parameters(symbol rate, spreading factor, etc.) and the BER performance of control channel through the computer simulation for its verification that it can be applied for communications system.

Effect of Diethylcarbamazine against Brugia malayi Infection on Cheju Island, evaluated in 1965 (1965년(年)에 실시(實施)한 Diethylcarbamazine의 말레이사상충(絲狀蟲)에 대한 구충효과(驅蟲效果)의 평가(評價))

  • Paik, Yung-Han
    • Parasites, Hosts and Diseases
    • /
    • v.24 no.2
    • /
    • pp.201-204
    • /
    • 1986
  • A study on the effect of diethylcarbamazine (DEC) (Supatonin) against Brugia malayi infection was conducted on Cheju Island in September 1965. A total of 182 persons living in a village of Aiwol Myun, Bukcheju-Gun was examined for microfilaraemia. Microscopic examination of smears of $20{\mu}l$ of blood revealed a microfilaria positivity rate of 28.5%. At the end of September 1965, 34 confirmed microfilaria positive cases were treated with DEC at a daily dosage of 5mg/kg body weight. A full course of 12 days of drug administration divided of two rounds for 6 days each was used. The first round of treatment was given under a strict supervision of the author in order to observe carefully side-effects of the drug. The second round of treatment was given in January 1966. The microfilaria density in $20{\mu}l$ of blood of those who received the drug was checked four times; before the treatment, during the first round of the treatment, 2 weeks and 4 months after the completion of the first round. The pre-treatment mean microfilaria density of 104.6 diminished to nearly zero (only two cases with one microfilaria respectively) 2 weeks after the first round and again slightly rose up to 0.5 four months after the first round. These results indicate that DEC (Supatonin) is highly effective to eliminate the microfilaria of B. malayi. However, severe side-effects, e.g. fever (average $38.6^{\circ}C$, maximum $39.7^{\circ}C$), headache, backache and seldom abdominal discomfort etc. were observed. There were two cases of withdrawal from the scheme due to refusal.

  • PDF

DEEP-South: The Progress Report

  • Moon, Hong-Kyu;Kim, Myung-Jin;Park, Jintae;JeongAhn, Youngmin;Yang, Hongu;Lee, Hee-Jae;Kim, Dong-Heun;Roh, Dong-Goo;Choi, Young-Jun;Yim, Hong-Suh;Lee, Sang-Min;Kwak, SungWon
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.43 no.1
    • /
    • pp.42.1-42.1
    • /
    • 2018
  • Deep Ecliptic Patrol of the Southern Sky (DEEP-South) observation is being made during the off-season for exoplanet survey, using Korea Microlensing Telescope Network (KMTNet). An optimal combination of its prime focus optics and the 0.3 billion pixel CCD provides a four square degrees field of view with 0.4 arcsec/pixel plate scale which is also best suited for small body studies. Normal operation of KMTNet started in October 2015, and a significant portion of the allocated telescope time for DEEP-South is dedicated to targeted observation, Opposition Census (OC), of near-Earth asteroids for physical and taxonomic characterization. This is effectively achieved through multiband, time series photometry using Johnson-Cousins BVRI filters. Uninterrupted monitoring of the southern sky with KMTNet is optimized for spin characterization of a broad spectrum of asteroids ranging from the near-Earth space to the main-belt, including binaries, asteroids with satellites, slow/fast- and non-principal axis-rotators, and thus is expected to facilitate the debiasing of previously reported lightcurve observations. Our software subsystem consists of an automated observation scheduler, a pipelined data processing system for differential photometry, and an easy-to-use lightcurve analysis toolkit. Lightcurves, spin periods and provisional determination of class of asteroids to which the lightcurve belongs will be presented, using the dataset from first year operation of KMTNet. Our new taxonomic classification scheme for asteroids will also be summarized.

  • PDF

An Application of k-$\varepsilon$ Turbulence Model to Predict How a Rectangular Obstacle with Heat Flux Affects Air Flow in An Experimental Animal House (실험축사의 공기유동예측을 위한 k-$\varepsilon$ 난류모형 적용)

  • Choi, Hong-Lim;Kim, Hyeon-Tae
    • Journal of Bio-Environment Control
    • /
    • v.1 no.1
    • /
    • pp.72-83
    • /
    • 1992
  • 우리 나라 축사는 생산효율 제고를 위하여 대형화, 밀폐화, 고밀도화, 자동화 경향이 뚜렷하다. 대형의 밀폐된 고밀도 축사는 쾌적한 실내환경을 전제로 하기 때문에 기계적으로 실내환경을 적절히 제어하지 않으면 안된다. 제한된 공간에 먼지, 병원성 미생물, 유해기체, 수분이나 열의 과도한 집적은 생산과 재생산효율에 심각한 영향을 미친다. 그러므로 축사내 생산주체인 가축과 작업인이 쾌적한 실내환경에서 생산활동을 할 수 있도록 열적, 화학적/생물학적 환경을 물리적으로 제어하지 않으면 안된다. 본 연구는 실험축사내 가축이 일정한 열을 발생할 때 실내공기의 유동형태를 예측하기 위해서 수행하였다. 이 연구의 결과를 실내환경제어를 위한 환기시스템 책략 개발의 기초자료로 활용할 수 있다. 실험축사내의 공기유동을 예측하기 위해 Body-Fitted Coordinate(BFC)의 격자배열과 k-$\varepsilon$ 난류모형 및 SIMPLE계열 solution scheme을 사용하였으며, 예측의 유효성 검정은 Boon(1978)의 실험결과를 이용하였다. 예측한 공기유동의 형태와 실험한 공기유동의 형태를 비교한 결과 대체로 만족할만한 결과를 얻었다. 그러나 유입공기의 온도가 1$0^{\circ}C$인 경우의 공기유동은 실험유동형태와 약간의 차이가 있었다. 즉, 실험에서는 수평슬롯으로 유입 된 공기가 바로 아래로 굴절되어 유동하였으나, 예측의 결과는 일정 거리로 수평방향으로 유동하다가 아래로 굴절하였다. 이런 유동의 차이는 k-$\varepsilon$ 난류모형 자체가 경험적으로 부력에 민감하게 반응않는 결함이 원인이 될 수도 있으며, 실험의 부적절한 수행이 원인이 될 수도 있다. 이 유동의 경우 Reynolds 수가 3,000정도의 난류이며, 완전발달유동 (fully-developed flow)이므로 관성력 (inertia force)이 부력 (buoyancy force)보다 커, 일정거리 수평으로 유동하다가 아래로 굴절할 수도 있기 때문이다. 앞으로 이를 규명하기 위한 보다 깊이 있는 연구가 이루어져야 할 것이다.

  • PDF

A Study on the New Active Tilt Control Systems for Improving Passenger′s Feeling of Ground Vehicles in Urban Area (도시형 지상 차량의 승차감 향상을 위한 새로운 능동형 기울임 제어 시스템에 관한 연구)

  • 소상균;변기식
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.2 no.2
    • /
    • pp.103-110
    • /
    • 2001
  • To reduce the traffic congestion and parking problems in urban areas tall and narrow vehicles have interested as a means to increase the utilization of existing freeways and parking facilities. The stability problem for those narrow vehicles which might be caused can be reduced by tilting the body toward the inside of the turn. The Direct Tilt Control(DTC) system and the Steering Tilt Control(STC) system have been proposed for those narrow vehicles. In this paper, as one of the performance improvement for that kind of vehicle a new control system to use the merits of both the DTC system and the STC system is proposed. Because two different control systems fight each other, the switching control scheme is applied as a means to prevent fighting. Also, the method in order to achieve the smoothly changed control system when the system is switched from the DTC to the STC or from the STC to the DTC, the appropriate type of control gain is designed.

  • PDF

Cooperative Strategies and Swarm Behavior in Distributed Autonomous Robotic Systems based on Artificial Immune System (인공면역 시스템 기반 자율분산로봇 시스템의 협조 전략과 군행동)

  • 심귀보
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.9 no.6
    • /
    • pp.627-633
    • /
    • 1999
  • In this paper, we propose a method of cooperative control (T-cell modeling) and selection of group behavior strategy (B-cell modeling) based on immune system in distributed autonomous robotic system (DARS). Immune system is living body's self-protection and self-maintenance system. These features can be applied to decision making of optimal swarm behavior in dynamically changing environment. For applying immune system to DARS, a robot is regarded as a ?3-cell, each environmental condition as an antigen, a behavior strategy as an antibody and control parameter as a T-cell respectively. When the environmental condition (antigen) changes, a robot selects an appropriate behavior strategy (antibody). And its behavior strategy is stimulated and suppressed by other robot using communication (immune network). Finally much stimulated strateby is adopted as a swarm behavior strategy. This control scheme is based on clonal selection and immune network hypothesis, and it is used for decision making of optimal swarm strategy. Adaptation ability of robot is enhanced by adding T-cell model as a control parameter in dynamic environments.

  • PDF