• Journal of Acupuncture Research
• /
• v.26 no.5
• /
• pp.65-75
• /
• 2009

Objectives : Pyrite is one of the important prescriptions that has been used in oriental medicine for healing of fracture. It is reasonable, therefore, to postulate that native copper affects the process of bone metabolism and bone formation. The purpose of this study is to discover the effect of Pyrite on the healing of tibia fracture. Methods : 1. In vitro test : MG-63 cell in human body and the Pyritum in the ratio of 0.5mg/ml, 1.0mg/ml, 1.5mg/ml, 2.0mg/ml were incubated for 24 hours. After 24 hours, RNA was extracted via trizol reagent (Sigma, USA). In order to understand the activation of osteoblast, the level of OPN mRNA, osteopontin, was measured. 2. In vivo tesgroups normal group, control group and experimental group. Left tibia bones of mice in CON and JT groups were fractured by bone cutters. Pyrite was orally administered to the experimental group. After 14 days, each group's tibia specimen was constructed to observe changes in activation of proinflmmatory cytokines in relation to MIF and IL-6. Also, proliferation of osteoblast and osteopontin were measured via changes in levels of OPN and OPN mRNA. Results : In jn-Titro test, the level of OPN mRNA, osteopontin production was remarkably increased in Pyritum-treated MG-63 cells. In in-vitro test, fractured area in external tibia morphology was increased more in the JT group than that of the CON group. Osteogenesis, endochodrial ossification, and osteoid in fractured area were also increased more in the JT group than that of the CON group. Increase in OPN mRNA, osteopontin level and osteoblast's proliferation were observed. Activation of MIF and IL-6 was confirmed from the fracture region. Conclusions : From the result, development of a new stimulator in healing fracture via pyrite is expected.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.145-154
• /
• 2005

Love wave and Rayleigh wave are the major elastic waves belonging to the category of the surface wave. Those waves are used to determine the ground stiffness profile using their dispersion characteristics. The fact that Love wave is not contaminated by P-wave makes Love wave superior to Rayleigh wave and other body waves. Therefore, the information that Love wave carries is more distinct and clearer than that of others. Based on theoretical research, the joint inversion analysis that uses the dispersion information of both Love and Rayleigh wave was proposed. This analysis consists of the forward modeling using transfer matrix, the sensitivity matrix for evaluating the ground system and DLSS (Damped Least Square Solution) as an inversion technique. The technique of joint inversion uses the dispersion characteristics of Love wave and Rayleigh wave simultaneously making the sensitivity matrix. The sensitivity matrix was used for inversion analysis repeatedly to find the approximate ground stiffness profile. The purpose of the joint inversion analysis is to improve accuracy and convergency of inversion results by utilizing that frequency contribution of each wave is different.

• Geophysics and Geophysical Exploration
• /
• v.2 no.1
• /
• pp.33-42
• /
• 1999

AVO and complex trace analyses mainly used to characterize natural gas reservoir were tested in this paper for a possible application to detection of major geological discontinuities such as fracture zones. The test data used in this study were calculated by utilizing a viscoelastic numerical program which was based on the generalized Maxwell body for a horizontal fracture model. In AVO analysis of a horizontal fracture zone, p-wave reflection appears to be variant depending upon the acoustic-impedence contrast and the offset distance. The fracture zone is also effectively clarified both in gradient stack and range-limited stack in which fracture zone reflection is attenuated with the increasing offset distance. In complex attribute plots (instantaneous amplitude, frequency, and phase), the top and bottom of the fracture Tone are characterized by a zone of strong amplitudes and an event of the same phase. Low frequency characteristics appear at the fracture zone and the underneath. Amplitude attenuation and waveform dispersion are dependent on Q-contrast between the fracture zone and the surrounding media. They were properly compensated by optimum inverse Q-filtering.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.318-329
• /
• 2017

This study examined the physical self-concept and self-efficacy of undergraduates. Using the convenience sampling method of non-provability sampling, a total of 377 undergraduates from North Kyongsang Province G city were selected. Of the 377 completed questionnairescollected, a total of 354 surveys with structural equation modeling were analyzed using theSPSS 22.0 statistics program. The self-esteem, endurance, health, and flexibility factors have positive effects on improvingthe self-control efficacy factor of self-efficacy in the order of physical self-concept factors. On the other hand,the higher university students perceive that among the physical self-concepts, the physical activity factor had more negative effects on the self-regulated efficacy. The self-esteem, health, and muscle strength have positive effects on improvingthe confidence factor of self-efficacy in the order of physical self-concept factors. The more perceptive endurance than the appearance, sports competence, body fat, health, self-esteem, flexibility, muscle strength of physical self-concept, and the more influence on self-efficacy. Overall, the higher the perception of physical activity factors among the physical self-concept factors, the more negative effects on the task difficult preference.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.53-62
• /
• 2014

The floor field model is the micro pedestrian model based on a cellular automata for modeling pedestrian movement in the interior space using the static and dynamic floor field. It regards a form of pedestrian as square but the actual pedestrian's shape and size are similar to ellipsoid or rectangle. Because of this, we are difficult to give a rotation effect to pedestrians and there is a limit to reflect an impact of clogging and jamming. Also, this model is not able to reflect an impact of a posture and visibility effectively in the pedestrian movement. In this study, we suggest the improved pedestrian model incorporating the actual shape and size of pedestrian. The pedestrian's shape is defined not square but rectangle which is close to the actual body size of Korean. Also, we define the model which is able to represent the impact of clogging and jamming between pedestrians by adding the pedestrian's posture. We develop the simulator for testing the suggested model and study the difference between two models by comparing a number of effects. As a result, we could confirm solving the problem with dynamic value in the existed model and reflecting the panic effect in evacuation situation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.59-77
• /
• 2003

This study is to validate the use of macro language for the land suitability analysis aiming to help to resolve land use conflicts. The silver-town suitability analysis is conducted on the Geejang Gun, Busan Metropolitan city. Such digital maps as terrain, road, facility, and water body were created for various cartographic models. A cartographic model identified the best suitable areas for silver-town development based on the such site selection variables as a distance to facility and road, slope and aspect of terrain, land use etc. Then, the other cartographic model identified the most favorable site among the candidate sites based on the comparison of the aspect of proximity, usage and environmental quality. Macro language was used for these modeling process and was used for the manipulation of all these spatial variables used in the models to resolve land use conflicts relating to the decision making process of the final site selection. This study will improve the effectiveness and rationality of the traditional site suitability analysis.

• Geophysics and Geophysical Exploration
• /
• v.17 no.1
• /
• pp.28-33
• /
• 2014

We investigate the spatial distribution of highly conductive layer using the one-dimensional inversions of the new magnetotelluric (MT) measurements obtained at the mid-mountain (400 ~ 900 m in elevation) western area of Jeju Island and the previous MT data over Jeju Island, Korea. The conductive layer indicates the sedimentary layer comprised of Seoguipo Fomation and U Formation. There is a definite positive correlation between the top of conductive layer and the earth surface in elevation. On the contrary, the bottom of conductive layer has a negative correlation with the surface elevation. In other words, the conductive layer has a shape of convex lens, which is thickest in the central part. The basement beneath the conductive layer could be concave in the central part of Jeju Island. A kriging considering the correlation between the layer boundary and the surface elevation provides a reliable geoelectric structure model of Jeju Island. However, further studies, i.e. three-dimensional modeling and interpretation integrated with other geophysical or logging data, are required to reveal the possible presence of three-dimensional conductive body near the subsurface vent of Mt. Halla and the causes of the bias in the depths of layer estimated from MT and core log data.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.395-404
• /
• 1995

The geologic structure of the Cheju volcanic island has been investigated by analyzing the gravity and magnetic data. Bouguer gravity map shows apparent circular low anomalies at the central volacanic edifice, and the maximum difference of the anomaly values on the island appears to be 30 mgal. The subsurface structure of the island is modeled by three-dimensional depth inversion of gravity data by assuming the model consists of a stacked grid of rectangular prisms of volcanic rocks bounded below by basement rocks. The gravity modeling reveals that the interface between upper volvanic rocks and underlying basement warps downward under Mt. Halla with the maximum depth of 5 km. Magnetic data involve aeromagnetic and surface magnetic survey data. Both magnetic anomaly maps show characteristic features which resemble the typical pattern of total magnetic anomalies caused by a magnetic body magnetized in the direction of the geomagnetic field in the middle latitude region, though details of two maps are somewhat different. The reduced-to-pole magnetic anomaly maps reveal that main magnetic sources in the island are rift zones and the Halla volcanic edifice. The apparent magnetic boundaries inferred by the method of Cordell and Grauch (1985) are relatively well matched with known geologic boundaries such as that of Pyosunri basalt and Sihungri basalt which form the latest erupted masses. Inversion of aeromagnetic data was conducted with two variables: depth and susceptibility. The inversion results show high susceptibility bodies in rift zones along the long axis of the island, and at the central volcano. Depths to the basement are 1.5~3 km under the major axis, 1~1.5 km under the lava plateau and culminates at about 5 km under Mt. Halla. The prominent anomalies showing N-S trending appear in the eastern part of both gravity and magnetic maps. It is speculated that this trend may be associated with an undefined fault developed across the rift zones.

• Archives of design research
• /
• v.19 no.6 s.68
• /
• pp.33-38
• /
• 2006

The development of the typeface 'Arita' presents a method and its following results for a corporate typographic identity. Amore pacific established a strategy for a typographic identity as for their high quality corporate culture and as a first step for it was to develop their corporate typeface 'Arita'. The typeface 'Arita' which pursues sharing and accompanying was developed to be used in the body text to enhance the function of the typography. What was needed to develop this typeface for Amore pacific was first, understanding of the corporation, and second, vision to present new direction for a typeface and its appropriate supervision, and third, ability in designing. Therefore, under the leading of Hong-ik University's meta design research institute, the typeface 'Arita' was created by in collaboration with Seoul women's university's modeling research institute and the typeface design specialty company, type space and the design company, Ahn-graphics. There are two kinds of weight in 'Arita' typeface, one is normal 'AritaM' and the other is semibold 'AritaSB'. 'Arita' is produced into TrueTypeFont(TTF) for Windows Operating System and OpenTypeFont(OTF) for Macintosh Operating System.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1147-1153
• /
• 2000

A total of 9,540 pigs were evaluated for their growth performance to provide information on the development of different feeding strategies to support maximum rate of protein deposition (PD). Large variations in growth performance and protein deposition rate were found in the population used in this study (ADG from 701 to 974 g/day; ADFI from 1,726 to 2,498 g/day; Feed/gain from 2.10 to 2.90; Backfat thickness from 12.4 to 20.5 mm and PD rate from 103 to 153 g/day). It was found that ADG was positively correlated to PD ($R^2=0.9362$, p<0.0001) while FCR was negatively correlated to PD ($R^2=0.4031$, p<0.0001). Backfat thickness was negatively correlated to PD ($R^2=0.7024$, p<0.0001) and to ADG ($R^2=0.5096$, p<0.0001). The estimated lysine requirement based on PD rate also showed large variation (12.37 to 18.38 g/day true ileal digestible lysine on average between 25 and 100 kg), thus strongly indicated the need of separate feeding strategies for each group of pigs. When pigs were divided into three categories according to estimated whole body PD rate, the group of pigs with the highest PD rate grew faster by 6.3 and 13.9% than pigs with intermediate and low PD rate, respectively. Feed utilization was also more efficient in pigs with a high PD rate. It appeared that pigs with high PD rate maintained higher PD rate especially in the later stage of their life. Pigs with high PD rate require an extra amount of 1.2 and 2.4 g/true digestible lysine per day and 0.4 and 0.8% more lysine in the diet than pigs with intermediate and low PD rate during the growing-finishing period respectively. Results of this study suggest that there is a need for separate feeding strategies for individual group of pigs with different PD rate. It should be noted that average value for each group presented in this report is not the adequate amount for an animals potential for maximum PD rate. With recent development in growth modeling and access to computer technologies to facilitate computation, pork producers can easily estimate pigs protein deposition rate and thus can make their own feeding strategies.