• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.597-603
• /
• 2015

This study investigates the actual domestic and overseas cyclewear wearing conditions for male high school cyclists. The study results provide factors and degree of dissatisfaction as basic data for cyclewear development. This study was conducted on 35 male high school cyclists (freshman to seniors) by a questionnaire and interview method. Study results were: Male high school cyclists considered functionality as most important when they bought cyclewear and the brand they most often bought was a cheap domestic brand. Dissatisfaction with the crotch, thigh circumference and minimum leg circumference was higher than other parts during wearing. A cyclist is more sensitive to wear because they require more lower body motion than other parts. Cyclewear should be: less transformed even by frequent laundering, made of breathable material and use a sewing technique that minimizes air resistance and increases fit the body. Functional pads ergonomically designed with high tactile materials should be developed to prevent 'saddle sore' and groin soreness region that happens because of a lower body bending posture when cycling. A follow-up study is recommended to further develop excellence in cyclewear functionality and dimension suitability for male high school cyclists through the size system.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.277-284
• /
• 2012

The purpose of this study was to find out the changes in beginners' batting movements after taking undergraduate baseball lectures, by comparing and analyzing the speed of bat, the angle of body and its segments, the angular velocity and so on. For this purpose, the author picked up five undergraduates who had not taken baseball lectures, and conducted three-dimension computerized tomography twice on them, that is, before and after taking baseball classes, with eight infrared cameras and two force platforms. The conclusions are, first, the time required for swing was shortened after taking the classes. Second, the maximum velocity of the bat-end was increased. Third, at the time of impact, while the rotation angles of the pelvis and the tip of left foot were increased, the left elbow had more flexion after the classes. Fourth, the size of ground reaction force was increased at the point of swing where the ground reaction force of left foot became maximized. As we can infer from these conclusions, beginners' hitting movements before taking baseball classes tended to swing only with the arms, without waist rotation and weight shift of the lower body, but after the classes, their movements were proved to be corrected into the swing using the lower body. For the future studies, the author expects a research in a close to real environment by using pitching machine.

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.28-33
• /
• 2013

This paper proposes a miniaturized high-isolation diversity antenna for wearable wireless body area network (WBAN) applications. An inverted-F type radiating element is used to reduce the overall dimension of the proposed antenna to $30mm{\times}30mm{\times}2.5mm$. The antenna performance on the human body phantom is analyzed through simulation and the performance of the fabricated antenna is verified by comparing the measured data with that of the simulation when the antenna is placed on a semi-solid flat phantom with equivalent electrical properties of a human body. The fabricated antenna has a 10 dB return loss bandwidth over the Industrial Scientific Medical (ISM) band from 2.35 GHz to 2.71 GHz and isolation is higher than 28 dB at 2.45 GHz. The measured peak gain of antenna elements # 1 and # 2 is -0.43 dBi and -0.54 dBi, respectively. Performance parameters are analyzed, including envelope correlation coefficient (ECC), mean effective gain (MEG), and the MEG ratio. In addition, the specific absorption ratio (SAR) distributions of the proposed antenna are measured for consideration in use.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1166-1172
• /
• 2003

The extremely strong competition among the world automobile industries has introduced the concept of PLM in the total production activities, one of whose major components is VM(Virtual Manufacturing). If the production lines are equipped with robots, the application of OLP in the virtual space is fully mature. However, in the point of the investment's and the maintenance's view, there are always some activities, which can not be automated: for example, typically the manual welding for prefixing in the automobile body shop and the material loading. Process planning for these activities, therefore, are decided mainly by experiences, which caused many repeated rework of the processes and the inconvenience of the workers, and resulted consequently in the reduction of the productivity and the safety of the workers. In this paper, the optimal dimension of the welding gun and its handle position and the optimal working path is simulated and decided by use of DELIMN/IGRIP and DELMIA/Ergo and the working area modelized in the virtual workcell of DELMIA.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.380-384
• /
• 1992

The authors carried out an experimental fishing of Sea eel(Astroconger Myriaster) Pots to find the accuracy of the relationship formula between body dimensions and the optimum diameter of pot hole. The diameter of pot hole was used by an experimental fishing were 0.7, 0.9, 1.0, 1.5, 2.0cm. the number of pot were 271, 278, 283, 296 respectively. An experimental fishing was performed during October, 1988 in the southern Sea of Korea. The results obtained can be summarized as follows; 1. The relationship formula between body dimensions was very accurate. 2. Optimum diameter of pot hole must be made 1.5cm at least.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.94-101
• /
• 2020

This helps plus-size consumers purchase ready-made clothes and improves fitness by analyzing the upper body shapes of abdomen-obese adult males; in addition, it creates a size system based on each size interval of obesity shapes. The criteria for the 572 male subjects surveyed were over 25 kg/㎡ of the BMI, over 90 cm of waist, and over 0.85 waist hip ratio. The results were as follows. First, the higher the age group, the higher the degree of abdominal obesity in each age group. The degree of obesity decreases age increase; however, was the risk of abdominal obesity increased. Second, Compared to standard body types, the average body size of Abdomen-obese males is significantly larger, especially in the waist area than in the chest area. Third, to propose a size system for abdominal obese adult males, 16 sections with a final 2% rate of appearance were finally adopted as suit-tops size system for abdominal obese adult males by applying a 3 cm dimension gap between each designation as specified in the KS standard. The coverage ratio for the 16 sections was 72.6% and the coverage effienciency was 4.5%. The results of this study can be used in a various clothes; in addition, the activation and segmentation of the plus-size market are also believed to be significant.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.440-458
• /
• 2019

Based on a 3D body data and pattern comparison analysis, this study developed a formal jacket pattern for men in their late 30s. In order to select the representative type of men in their late 30s, factor analysis and cluster analysis were conducted on data form 319 men, 35 to 39 years old using the anthropometric data from The 7th Size Korea (2015) as the representative body type. The surface of the body surface was developed using a 3D human shape of a male in his 30s in The 6th Size Korea (2010). Then the shape was changed to a flat pattern that confirmed the necessary elements for setting the shape and dimension. Cluster analysis revealed type B as the representative type because it showed the best shape characteristics for men in the late 30s. The drafting method of the final research pattern is as follows. Jacket length: stature/2.5cm, back length: stature/5+8.5cm (constant)], armhole depth: [stature/ 7-1.5cm (constant)], back width: [C/9+9.5cm (constant)]+1cm (ease), front width: [C/9+8.5cm (constant)]+1cm (ease), armscye depth: C/8, front waist darts: 1cm, front closure amount: 2cm.

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.3
• /
• pp.13-23
• /
• 2021

In this paper, we proposed a framework that generates the trajectory of a single rigid body based on its COM configuration and contact pose. Because we use a smaller input dimension than when we use a full body state, we can improve the learning time for reinforcement learning. Even with a 68% reduction in learning time (approximately two hours), the character trained by our network is more robust to external perturbations tolerating an external force of 1500 N which is about 7.5 times larger than the maximum magnitude from a previous approach. For this framework, we use centroidal dynamics to calculate the next configuration of the COM, and use reinforcement learning for obtaining a policy that gives us parameters for controlling the contact positions and forces.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.192-203
• /
• 2007

Objective: The aim of this study was assessment of the relationship between airway space and facial morphology in Class III children with nasal obstruction. Methods: For this study, 100 Class III children (50 boys and 50 girls) were chosen. All subjects were refered to ENT, due to nasal obstruction. Airway space measurements and facial morphology measurements were measured on lateral cephalometric radiograph. Pearson correlation analysis was used to assess the relationship between airway space and facial morphology Results: Ramal height, SNA, SNB, PFH, FHR and facial plane angle were positively related to upper PAS, and sum of saddle angle, articular angle, and genial angle, SN-GoGn, Y-axis to SN and FMA negatively related to upper PAS. Genial angle, FMA were positively related to lower PAS, and articular angle, facial depth, PFH and FHR negatively related to lower PAS. PCBL, ramal height, Mn. body length, Mn. body length to ACBL, facial depth, facial length, PFH and AFH were positively related to tonsil size. Sum of saddle angle, articular angle, genial angle, facial length, AFH, FMA and LFH were positively related to tongue gap, and IMPA and overbite was negatively related to tongue gap. Upper PAS, related to size of adenoid tissue, was mainly related to posterior facial dimension following a vertical growth pattern of face and mandibular rotation. Lower PAS and tonsil size, related to anterior-posterior tongue base position, were significantly related to each other. Lower PAS was related to growth pattern of mandible, and tonsil size was related to size of mandible and horizontal growth pattern of face. Tongue gap was related to anterior facial dimension following a vertical growth pattern of face. Conclusion: Significant relationship exists between airway space and facial morphology.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.245-256
• /
• 2023

When restoring with a dental digital system for implant-supported prosthesis, a double digital scanning technique is required: an intraoral scan of the three-dimensional implant location and intraoral scan after placement of temporary denture or provisional prosthesis. During the intraoral scan, the use of scan body as a stable landmark can improve the accuracy of digital impression and simplify laboratory process. In this case, a full-digital system was used to plan and fabricate a custom abutment, provisional prosthesis, and definitive prosthesis. After implant placement, the scan area of the intraoral scan body connected with implant and the intraoral scan body marked on the inside of temporary denture were superimposed. Out of the superimposed files, a custom abutment and provisional prosthesis were fabricated which match the vertical dimension of temporary denture, and definitive prosthesis was fabricated based on provisional prosthesis. We report this case because result has been functionally and esthetically satisfactory by using vertical dimension and central relation set during the fabrication of temporary denture to the definitive prosthesis.