• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.328-331
• /
• 2001

FMM(Fast Multipole Method)은 계산시간이나 메모리 측면에서 장점으로 인해, 수치해석기법으로써는 비교적 대형 구조물의 RCS 계산도 가능하며, 현재 연구가 활발히 진행되고 있는 기법중의 하나이다. 하지만, 폭이 좁은 타원형 형태의 산란체에 대한 해석에서 절점들을 그룹화하는 과정에서 정확도가 문제되었다. 따라서, 본 논문에서는 언급한 구조에 대한 RCS를 계산할 때 발생하는 문제점과 이를 해결하기 위한 방법을 제안한다. 해석은 2차원 도체의 TM 및 TM 편파에 대한 산란특성을 계산하였다.

• 환경생물
• /
• 제38권4호
• /
• pp.507-517
• /
• 2020

본 연구에서는 외부형태적으로 매우 비슷한 참조기(Larimichthys polyactis) 와 부세(L. crocea)의 두 종 간 구분을 위해 계측형질 분석을 포함한 몇가지 기법들을 수행하였다. 총 48개의 계측형질 중 4개의 유의한 차이를 보이는 계측형질이 파악되었으며(p<0.05) classical dimension에서는 유의한 차이를 보이는 계측형질은 없었다(p>0.05). 오히려, 2가지의 truss dimension(Insertion of dorsal fin base origin of pectoral fin base와 Origin of anal fin base - origin of pectoral fin base)와 2가지의 head part dimension (Most anterior extension of the head - above of eye와 Above of eye posterior aspect of operculum)에서는 유의한 차이가 나타났다(p<0.05). 하지만, 이러한 4가지 계측형질 중 head part dimension의 Above of eye - posterior aspect of operculum의 계측형질을 제외한 나머지 3가지 계측형질들에서 부세가 참조기에 비해 더 큰 수치를 나타내었다(p<0.05). X-ray 분석 결과 curved vertebral column에서 부세는 45.1±2.34°로 참조기의 38.4±1.82°에 비해 8.4% 더 큰 수치를 나타내었다(p<0.05). 머리부위의 표피를 제거한 후의 유상돌기는 두 종에 모두 존재하여 일반적으로 참조기에서만 유상돌기가 존재한다고 알려진 바와는 달리, 유상돌기는 두 종을 구분하기 위한 형질로 볼 수 없었다. 본 연구 결과는 참조기와 부세에서 일부 외부 체형에 의해 명확히 구분 가능함을 시사한다.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.197-207
• /
• 2005

The purpose of this study was to investigate the body segment kinematics by lap time during men's 5,000m racing. The subjects in this study were 4 male athletics who take part in the competition. The two dimension motion analysis with DLT(direct linear transformation) method was executed using digital video cameras. The following conclusion was that : It was shown that top ranking in a competition is continuous race pattern and the last Lap time is the most fast. It was shown that top ranking in a competition is continuos the stride length and it was the largest in the last Lap time. It was shown that according to the passing Lap time trunk frontal angle was decreasing and shoulder angle was continuous.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.182-191
• /
• 2004

This study is focused on the development of a child human model, which is composed of skin, skeleton, joints and muscle, etc. The dimension of child outer skin is referred to anthropometric data from KRISS (Korea Research Institute of Standards and Science). The positions of joint and mass properties of body segments are calculated from ATB(Articulated Total Body) program, GEBOD. The properties of bones and muscles are obtained by the way of scaling from adult human model. To verify the developed human model, ROM simulation and sled test is conducted. Developed human model can be effectively applied to the evaluation of human injury in crash situation and development of child restraint system. The explicit finite element program $PAM-CRASH^TM$ was used to simulate six-year old child human model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.792-795
• /
• 2007

To quantify irregular body motions the time series analysis was applied to the gait study. The motions obtained from gait experiment are complex to exhibit nonlinear behaviors. The purpose of this study is to measure quantitatively the characteristics of the major six joints of the body during walking. The gait experiments were carried out for eighteen young males walking on a motor driven treadmill. Joint motions were captured using eight video cameras, and then three dimensional kinematics of the neck and the upper and lower extremities were computed by KWON 3D motion analysis software. The largest Lyapunov exponent was calculated from the time series to quantify stabilities of each joint. The results provides a data set of nonlinear dynamic characteristics for six joints engaged in normal walking.

• 환경위생공학
• /
• 제1권1호
• /
• pp.31-40
• /
• 1986

It was observed by electron microscope (transmission electron microscope, Scanning electron microscope) as a study on microstructure of soybean after r-ray irradiation with the intensity of 5KGY, 7KGY, 10KGY and 15KGY, fermented with the named Bacillus subtilis SCF, which newly separated and identified. According to the progress fermentation, changes of soybean microstructure have been increased, especially irradiated soybeans more increased than non-irradiated them. Observation of microstructure by electron microscope showed that each protein body became more. expanded in the dimension and decomposed, spherosome around the protein body in unit area dispersed and dwindled in the numbers of it. As the fermentation on progress, changes of soybean microstructure were suitable on fermentation period of 7KGY soybean, 48-72hrs fermentation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.322-322
• /
• 2010

In this paper, we propose a novel type valveless micro-pump that uses extensional vibration mode of traveling wave as a volume transporting means for solving some problems about check valves, essential parts of usual pumps. The proposed pump consists of two piezoelectric ceramic rings and a metal body located in the middle of them respectively. Because the drift of bended surface that results from the traveling wave excitation controls the fluid flow, check valves are not needed in this pump model. In accordance with the variation of the pump body dimension, we analyzed the vibration displacement characteristics of pump model, determined the optimal design condition, fabricated the prototype pump from the analysis results and evaluated its efficiency.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.316-320
• /
• 2008

In this paper, the near wake of stationary and transversely oscillating square section cylinders with different corner radii are studied by numerical method to investigate the influence of corner radius. Six models R/D=0,0.1,0.2,0.3,0.4,0.5 (R is the corner radius and D is the characteristic dimension of the body) were studied. It was found that the corner radius of square cylinder significantly influences the flow features around the body both in stationary and oscillating conditions. Results indicate that, as R/D ratio increases, the Strouhal number increases and the separation point decrease for the stationary and oscillating cases.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.316-320
• /
• 2008

In this paper, the near wake of stationary and transversely oscillating square section cylinders with different corner radii are studied by numerical method to investigate the influence of corner radius. Six models R/D=0,0.1,0.2,0.3,0.4,0.5 (R is the corner radius and D is the characteristic dimension of the body) were studied. It was found that the corner radius of square cylinder significantly influences the flow features around the body both in stationary and oscillating conditions. Results indicate that, as R/D ratio increases, the Strouhal number increases and the separation point decrease for the stationary and oscillating cases.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.858-864
• /
• 1995

A porous glass-ceramics body was prepared in the phosphate system. The glass composition of 47.2CaO-22.2TiO2-30.6P2O5 (mol%) containing a few weight percent of ZrO2 was suitable for a mother glass of a porous glass-ceramics. The dense glass-ceramics body was made by a two-step heat treatment of the mother glass. The crystalline phases of the glass-ceramics were $\beta$-Ca3(PO4)2 and CaTi4(PO4)6. The $\beta$-Ca3(PO4)2 phase could be selectively leached out with HCl solution and thus a crystalline $\beta$-Ca3(PO4)2 skeleton was remained. The dimension and shape of the porous glass-ceramics were nearly the same as the those of the first formed glass. The specific surface area and average proe radius of the porous glass-ceramics were 19$m^2$/g and 22 nm, respectively.