• Journal of Chest Surgery
• /
• v.5 no.1
• /
• pp.29-34
• /
• 1972

Interventricular Septal Defect is probably the most common congenital cardiac lesion. Despite rapid technical advances and increasing surgical experience the risk of surgical intervention for correction of Ventricular Septal Defect in infants with pulmonary hypertension remains formidable. Since Sirak et al [1959] reported a succesful case of two stage approach to their surgical correction, it has led to a policy of primary palliation,followed by complete correction as a secondary procedure, after age 3 to 4 years. Most surgeon prefer to perform complete correction of Ventricular Septal Defect when body weight exceeds 30 Lbs. and before development of so-called Eisenmengers complex, for the good postoperative results. Authors report 2 cases of Ventricular Septal Defect with pulmonary hupertenslon, who was underwent pulmonary artery banding as a palliative procedure in the Department of Surgery,Severance Hospital Yonsei University. Case 1:4 year old male, initially a complete correction of Ventricular Septal Defect was attempted by the help of mild hypothermia and extracorporeal circulation. During the procedure of a construction of an extracorporeal by- pass, a sudden cardiac arrest developed. After resuscitation of the heart,pulmonary artery banding was performed as a palliation. On the first postoperative day the patient developed generalized tonic convulsion, cyanosis, vomiting and eventually shock. Patient discharged home after a full recovery. Case 2.: 9 month old female, the pulmonary artery constricted with Teflon patch successfully. After the patients first postoperative day several cyanotic spells developed followed by 3 cardiac arrests. This repeated until when she expired with respiratory failure.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.61-71
• /
• 2015

In this study, visual evaluation was performed with changes in peplums design to provide data which can enhance wearing image effects at the production of peplums one-piece. According to changes in volume and position of peplums, a total of 9 stimulants were chosen. Then, they were evaluated using a seven-point rating scale against 50 fashion students. The data has been analyzed by Factor Analysis, ANOVA, $Scheff{\acute{e}}$'s Test and the MCA method. The results of the study are as follows : 1. According to factor analysis, the components of visual evaluation depending on the changes in volume and position variations of peplums were divided into four factors: elegance, individuality, upper body correction and upper body emphasis. 2. According to visual evaluation depending on changes in the position variations of peplum, 'high waist' and 'natural waist' revealed a significant difference in elegance, individuality and upper body correction. 'Low waist' was observed in all four positions. 3. According to visual evaluation depending on the changes in volume of peplums, a significant difference at $45^{\circ}$ was observed in except for elegance. Significant differences at $90^{\circ}$ and $180^{\circ}$ were observed in all four positions. 4. In terms of interactions over in volume and position variations of peplums, interaction effects were found in two factors.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.2
• /
• pp.119-125
• /
• 2018

Objective: The purpose of this study was to compare the effect of different 12-week exercise programs for posture correction on postural alignment in elderly women. Method: The study included 36 elderly women who were randomly divided into 3 groups: Group A (core exercise, n=12), Group B (combined exercise, n=12), and Group C (Pilates exercise, n=12). Postural alignment was measured using 6 variables in frontal and sagittal planes. Two-way mixed analysis of variance was used to compare the effect of exercise program types on postural alignment and a paired t-test was used to compare differences in postural alignment after exercise. Results: The core exercise group showed statistically significant improvement (p<.05) in multiple upper and lower body postural alignment measurements. The combined exercise and Pilates exercise groups showed statistically significant improvement (p<.05) in upper body measurements alone. Conclusion: Core exercise, combined exercise, and Pilates exercise improved postural alignment in elderly woman through improvement in muscle strength and ligament flexibility around the spine and pelvis.

• Journal of Chest Surgery
• /
• v.27 no.8
• /
• pp.650-655
• /
• 1994

The author analyzed 99patients with VSD weighting less than 10kg of body weight who underwent surgical correction from 1981 to 1992 at cardiovascular department of Hanyang University hospital. Patients occupied 29.3% of total cases who were underwent surgical corrections for congenital heart diseases during that time. Of the 99 patients, 51 patients were male [52%] and 48 patients[48%] were female. Age ranged from 28 days to 36 months with mean age of 13.6 months. Mean body weight was 7.53kg. According to Kirklin`s anatomical classification, type II defect was most common [61.6%]. Associated anomaly was found in 48 patients [48.5%]. Patent foramen ovale was most commonly associated cardiac anomaly [14.1%] and followed by atrial septal defect [12.1%], patent ductus arteriosus [10.1%]. Cardiac catheterization data were analyzed. The most common range of Qp/Qs, Rp/Rs, Pp/Ps were above 3.0, 0.1 - 0.25, and above 0.75 respectively. Among the indications of surgical correction, there were pulmonary hypertention in 69 patients, congestive heart failure in 44 patients, frequent respiratory infection in 47 patients, growth retardation in 33 patients. The most common surgical approach and method for VSD closure were right atriotomy[48.3%] and dacron patch closure[93.3%]. Complication rate was 13.1% [13 cases], and overall mortality was 17.1% [17 cases]. The cause of death consisted of low cardiac output syndrome[11 cases], acute renal failure[3 cases], sepsis[2 cases] and pulmonary insufficiency[1 case] in order of frequency.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.299-309
• /
• 2011

Energy consumption is a key issue in body sensor networks (BSNs) since energy-constrained sensors monitor the vital signs of human beings in healthcare applications. In this paper, packet size optimization for BSNs has been analyzed to improve the efficiency of energy consumption. Existing studies on packet size optimization in wireless sensor networks cannot be applied to BSNs because the different operational characteristics of nodes and the channel effects of in-body and on-body propagation cannot be captured. In this paper, automatic repeat request (ARQ), forward error correction (FEC) block codes, and FEC convolutional codes have been analyzed regarding their energy efficiency. The hop-length extension technique has been applied to improve this metric with FEC block codes. The theoretical analysis and the numerical evaluations reveal that exploiting FEC schemes improves the energy efficiency, increases the optimal payload packet size, and extends the hop length for all scenarios for in-body and on-body propagation.

• Radiation Oncology Journal
• /
• v.36 no.2
• /
• pp.122-128
• /
• 2018

Purpose: To investigate positional uncertainty and its correlation with clinical parameters in spine stereotactic body radiotherapy (SBRT) using thermoplastic mask (TM) immobilization. Materials and Methods: A total of 21 patients who underwent spine SBRT for cervical or upper thoracic spinal lesions were retrospectively analyzed. All patients were treated with image guidance using cone beam computed tomography (CBCT) and 4 degrees-of-freedom (DoF) positional correction. Initial, pre-treatment, and post-treatment CBCTs were analyzed. Setup error (SE), pre-treatment residual error (preRE), post-treatment residual error (postRE), intrafraction motion before treatment (IM1), and intrafraction motion during treatment (IM2) were determined from 6 DoF manual rigid registration. Results: The three-dimensional (3D) magnitudes of translational uncertainties (mean ${\pm}$ 2 standard deviation) were $3.7{\pm}3.5mm$ (SE), $0.9{\pm}0.9mm$ (preRE), $1.2{\pm}1.5mm$ (postRE), $1.4{\pm}2.4mm$ (IM1), and $0.9{\pm}1.0mm$ (IM2), and average angular differences were $1.1^{\circ}{\pm}1.2^{\circ}$ (SE), $0.9^{\circ}{\pm}1.1^{\circ}$ (preRE), $0.9^{\circ}{\pm}1.1^{\circ}$ (postRE), $0.6^{\circ}{\pm}0.9^{\circ}$ (IM1), and $0.5^{\circ}{\pm}0.5^{\circ}$ (IM2). The 3D magnitude of SE, preRE, postRE, IM1, and IM2 exceeded 2 mm in 18, 0, 3, 3, and 1 patients, respectively. No association were found between all positional uncertainties and body mass index, pain score, and treatment location (p > 0.05, Mann-Whitney test). There was a tendency of intrafraction motion to increase with overall treatment time; however, the correlation was not statistically significant (p > 0.05, Spearman rank correlation test). Conclusion: In spine SBRT using TM immobilization, CBCT and 4 DoF alignment correction, a minimum residual translational uncertainty was 2 mm. Shortening overall treatment time and 6 DoF positional correction may further reduce positional uncertainties.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.80-85
• /
• 2020

Recently the incidence of musculoskeletal disorders in students and office workers is increasing, and the necessity of maintaining correct posture and corrective training is required, but related research is insufficient. In the previous study, a membrane sensor or a pressure sensor was placed on the seat cushion to see the deviation of the body weight, or a sensor that restrained the user was attached to measure the position change. In this study, a sensor device for detecting a position change in consideration of wearing comfort was developed, and the measured angle was verified through an analysis app. A sensor device consisting of an IMU sensor is attached to the cervical spine and vertebra spine to measure the position transformation in the sitting position. The change value of the position measured by the two sensors was converted into an angle, and the angle value is displayed in real time through the analysis app. In this study, the possibility of measuring the real-time change value according to the change in position, the convenience of wearing, and the tendency of angle measurement were proved. Future research should proceed with more precise angle calculation and correction of motion noise.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.781-789
• /
• 2021

To enhance the design and comfort of waist-protection corsets, this study analyzed the product characteristics of five types of posture-correction corsets that are available commercially. Additionally, subjective evaluation of the corsets was conducted on women aged 20 to 60 years, in terms of design, material preference, fit, comfort, degree of correction, freedom of movement, tightness, and convenience of front fastening. Following product analysis, the five corset types were divided into: two soft, one semi-hard, and two hard types in terms of the degree of elongation. As a result of pattern analysis, the soft type was designed to improve fit by reflecting the body curvature, whereas the semi-hard and hard types were relatively flat. Through the wearing sensation assessment, the hard type manufactured by company S was the best in terms of design, material, fit, comfort, correction degree, and freedom of movement. The soft type was average in design, material, and fit while relatively poor in the correction degree and tightness. The results indicated that soft materials, flexible bones with appropriate tension, patterns designed to snugly fit the body with large curvature at the top and bottom for better inflection, and adjustable support belts that can be double-fixed are crucial elements in improving the corset design to boost the comfort of wearing. These study results are helpful in the development of waist-protection corsets with excellent wearing comfort and design appreciated by customers.

• The Journal of Korean Medicine
• /
• v.40 no.3
• /
• pp.198-223
• /
• 2019

Objectives: The purpose of this study was to investigate the effect of Korean medicine treatment on facial asymmetric treatment in 5 cases of facial asymmetry correction by non - surgical treatment such as acupucture, chuna treatment, FCST (Functional cerebrospinal technique) and cranial osteopathy. Methods: We analyzed the initial charts of 5 patients who had undergone facial asymmetry in a Korean medicine clinic and measured the position and distance using the photograph, lateral cephalograms, and whole body radiograms. The results were as follows. Results: To quantify both soft and hard tissues to confirm the results of Korean medicine treatment of facial asymmetry, soft tissues quantitatively measure the displacement of the face, the slope of the left and right eyes, and the slope of the lip in order to grasp the positional displacement of the mandible. As a result, on the average, the correction effect as measured by the angle difference between A and C is $1.8{\pm}0.57$, the correction effect as measured by the angle difference between B and C is $1.4{\pm}0.89$, and the angle difference between D and the horizontal plane is $1.9{\pm}0.89$, and the angle difference between E and the horizontal plane is $1.9{\pm}0.89$. The result of reduced angle difference between A and C means that the head position shifted from the center of the body to the unilateral side was shifted to the center. The decrease in the angle difference between B and C means the restoration of the maxillary distortion relative to the mandible. In hard tissues, numerical values were measured based on the skull standard. The average distortion of the skull was $1.9{\pm}0.67$, and the distortion of the lower eye was $1.4{\pm}0.41$. Conclusion: General studies on facial asymmetric treatment are limited to treatments such as surgery and orthodontics. However, this study confirmed the possibility that facial asymmetry could be corrected by Korean medical treatment consisting of reversible non-surgical treatment rather than irreversible treatment such as surgery or orthodontic treatment. In particular, Korean medicine treatment is effective for muscular asymmetry, soft asymmetry, functional asymmetry, etc. The facial asymmetric treatment of Korean medicine is not limited to the face-centered correction, but the asymmetry of the whole body may be corrected as well.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.5
• /
• pp.371-376
• /
• 2007

Objective : Balloon kyphoplasty can effectively relieve the symptomatic pain and correct the segmental deformity of osteoporotic vertebral compression fractures. While many articles have reported on the effectiveness of the procedure, there has not been any research on the factors affecting the deformity correction. Here, we evaluated both the relationship between postoperative pain relief and restoration of the vertebral height, and segmental kyphosis, as well as the various factors affecting segmental deformity correction after balloon kyphoplasty. Methods : Between January 2004 and December 2006, 137 patients (158 vertebral levels) underwent balloon kyphoplasty. We analyzed various factors such as the age and sex of the patient, preoperative compression ratio, kyphotic angle of compressed segment, injected PMMA volume, configuration of compression, preoperative bone mineral density (BMD) score, time interval between onset of symptom and the procedure, visual analogue scale (VAS) score for pain rating and surgery-related complications. Results : The mean postoperative VAS score improvement was $4.93{\pm}0.17$. The mean postoperative height restoration rate was $17.8{\pm}1.57%$ and the kyphotic angle reduction was $1.94{\pm}0.38^{\circ}$. However, there were no significant statistical correlations among VAS score improvement, height restoration rate, and kyphotic angle reduction. Among the various factors, the configuration of the compressed vertebral body (p=0.002) was related to the height restoration rate and the direction of the compression (p=0.006) was related with the kyphotic angle reduction. The preoperative compression ratio (p=0.023, p=0.006) and injected PMMA volume (p<0.001, p=0.035) affected both the height restoration and kyphotic angle reduction. Only the preoperative compression ratio was found to be as an independent affecting factor (95% CI : 1.064-5.068). Conclusion : The two major benefits of balloon kyphoplasty are immediate pain relief and local deformity correction, but segmental deformity correction achieved by balloon kyphoplasty does not result in additional pain relief. Among the factors that were shown to affect the segmental deformity correction, configuration of the compressed vertebral body, direction of the most compressed area, and preoperative compression ratio were not modifiable. However, careful preoperative consideration about the modifiable factor, the PMMA volume to inject, may contribute to the dynamic correction of the segmental deformity.