• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.282-286
• /
• 2016

A sintered body of $TiB_2$-reinforced iron matrix composite ($Fe-TiB_2$) is fabricated by pressureless-sintering of a mixture of titanium hydride ($TiH_2$) and iron boride (FeB) powders. The powder mixture is prepared in a planetary ball-mill at 700 rpm for 3 h and then pressurelessly sintered at 1300, 1350 and $1400^{\circ}C$ for 0-2 h. The optimal sintering temperature for high densities (above 95% relative density) is between 1350 and $1400^{\circ}C$, where the holding time can be varied from 0.25 to 2 h. A maximum relative density of 96.0% is obtained from the ($FeB+TiH_2$) powder compacts sintered at $1400^{\circ}C$ for 2 h. Sintered compacts have two main phases of Fe and $TiB_2$ along with traces of TiB, which seems to be formed through the reaction of TiB2 formed at lower temperatures during the heating stage with the excess Ti that is intentionally added to complete the reaction for $TiB_2$ formation. Nearly fully densified sintered compacts show a homogeneous microstructure composed of fine $TiB_2$ particulates with submicron sizes and an Fe-matrix. A maximum hardness of 71.2 HRC is obtained from the specimen sintered at $1400^{\circ}C$ for 0.5 h, which is nearly equivalent to the HRC of conventional WC-Co hardmetals containing 20 wt% Co.

• 한국의류학회지
• /
• 제25권2호
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.

• Mass Spectrometry Letters
• /
• 제8권3호
• /
• pp.59-64
• /
• 2017

In clinical diagnosis, it's well known that the abnormal level of uric acid (UA) in human body is implicated in diverse human diseases, for instance, chronic heart failure, gouty arthritis, diabetes, and so on. As a primary method, an isotope dilution mass spectrometry (IDMS) has been used to obtain the accurate quantity of UA in blood or serum and also develop the certificated reference material (CRM) so as to provide a SI-traceability to clinical laboratories. Due to the low solubility of UA in water, an ammonium hydroxide ($NH_4OH$) has been considered as a promising solvent to increase the solubility of UA that enables the preparation of both UA and its isotope standard solution for next IDMS-based absolute quantification. But, because of using this $NH_4OH$ solvent, it gives rise to the unwanted degradation of UA. In this study, we sought to optimize condition for the stability of UA in $NH_4OH$ solution by varying the mole ratios of UA to $NH_4OH$, followed by ID-LC-MRM analysis. In addition, we also inspected minutely the effect of the storage temperatures. Additionally, we also performed the quantitative analysis of UA in the KRISS serum certificated reference material (CRM, 111-01-02A) with diverse mixing ratios of UA to $NH_4OH$ and then compared those values to its certification value. Based on our experiments, adjusting the mole ratio of 1/2 ($UA/NH_4OH$) with the storage temperature of $-20^{\circ}C$ is an effective way to secure both the solubility and stability of UA in $NH_4OH$ solution for next IDMS-based quantification of UA in serum.

• 한국의류학회지
• /
• 제43권6호
• /
• pp.866-876
• /
• 2019

This study examined the physiological and psychological effects of wearing gloves at rest in a cold environment. Seven elderly females participated in two separate trials: wearing gloves (WG) and bare hands (BH). The experiment was conducted for 60 min in a climatic chamber (air temperature 7.8±0.3℃ with 44±2%RH) with a sedentary posture. Microclimate temperature on the left palm was 4.16℃ higher in WG compared to that in BH (p<.1). Microclimate temperature on the chest during the last 5 min increased compared to the initial 5 min only in WG (p<.05). During the last 5 min, skin temperatures at the arm and hand in WG were higher than those in BH (p<.05). There was no statistical difference in the change of rectal temperature between WG and BH. Heart rate in BH was significantly higher compared to the WG (p<.05). Subjects also felt less cold on the whole body and hand in WG than those in BH (p<.05). The findings indicate that wearing gloves for elderly females affected the distribution of skin temperature and cardiovascular response in cold environments. Elderly females should be informed about the importance of wearing gloves through the clothing guideline in winter.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.223-230
• /
• 2011

Physiological signals such as body temperature, heart rate, blood pressure and heart rate variability and biomechanical workload for stress analysis were investigated during the cherry tomato harvesting work in a greenhouse. The skin temperatures raised $0.05^{\circ}C$/min, $0.03^{\circ}C$/ min, and $0.08^{\circ}C$/min in standing, stooping and squatting postures, respectively. Breath rate significantly increased from 18 to 28 breaths/min during the cherry tomato harvesting work. As the heart rate during the work ranged from about 72 to 110 beats/min (bpm), the cherry tomato harvesting work appeared to be a light intensity task of less than 110 bpm. The worker's average energy consumption rate in three positions during 43 min working time was 65.74 kcal (91 kcal/h in 70 kg). This was a light intensity of work, compared to 75 kcal/h in 70 kg of basic metabolic energy consumption rate of a worker with 70 kg weight; The maximum shear force on the disk (L5/ S1) due to static workload in the cherry tomato harvesting work was 446 N in the stooping posture, 321 N in the squatting posture and 287 N in the standing posture. Acute stress index expressed with the heart rate variability, increased parasympathetic activation up to about 70 while workers were doing most agricultural work in this study. This study provided a system to measure quantitatively workers' physiological change, kinematics and kinetic factors without any restrictions of space in the greenhouse works.

• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1970-1977
• /
• 2019

Understanding the irradiation hardening effect of structural steels under various irradiation conditions plays an important role in developing advanced nuclear systems. Such being the case, a crystal plasticity model for body-centered cubic (BCC) crystal based on the density of dislocations and irradiation defects is summarized and numerically implemented in this paper. Based on this model, nano-indentation hardness of Chinese A508-3 steels with ion irradiation is calculated. Very good agreement is observed between simulation and experimental data of several different irradiation doses subjected to various operating temperatures, from which, it can be concluded that indentation hardness increases with increasing irradiation dose at both room temperature and high temperature. Consequently, the validity of this model has been proved properly, and furthermore, the model established in this paper could guide the study of irradiation hardening effect and temperature effect to some extent.

• 한국임상수의학회지
• /
• 제35권3호
• /
• pp.97-99
• /
• 2018

The aim of this study is to determine whether subcutaneous temperature (ST) was correlated with rectal temperature (RT) in cattle with inducing artificial fever. In order to determine the correlation between their temperatures, the experiment was performed as follow: Among nine Holstein steers, lipopolysaccharide (LPS) was intravenously administered at a dose of $0.5{\mu}g/kg$ of body weight to six Holstein steer, then, 6 ml of saline was administrated to three steers as a control group. After LPS injection, ST was recorded using subcutaneously implanted thermo-logger sensors at 10-min intervals, and RT was measured using a digital thermometer at 0, 1, 2, 3, 4, 8 and 12 h. In steers with LPS injection, RT was highest at 3 to 4 h and recovered to a pre-challenge temperature at 8-22 h. A similar fluctuation was shown in ST except for an unexpected decrease at 1 h, and a positive correlation between RT and ST was observed in LPS-challenged steers (r = 0.497, P = 0.04). This result suggests that ST could be utilized as an index for early detection of infectious diseases or physiological events.

• Fisheries and Aquatic Sciences
• /
• 제13권1호
• /
• pp.79-83
• /
• 2010

Since 1998, a new viral disease with high mortality has been consistently recorded in Korea in cultured carp, Cyprinus carpio. In this study, we investigated an epizootic of the disease that caused high mortality rates in carp obtained from 11 farms in Korea between 1999 and 2007. Assessment of koi herpesvirus (KHV) levels in diseased carp was carried out to determine if this virus was the etiologic agent of disease in this instance. High mortality rates in carp were recorded mainly in the spring and autumn at water temperatures between $19^{\circ}C$ and $24^{\circ}C$. Diseased fish typically showed surface discoloration, with a thick opaque mucus covering the body and gills. Protozoan parasites and bacteria were recovered from 7/29 (24%) and 2/26 (8%) of fish, respectively. Evidence of viral infection was marked; cytopathic effects (CPEs), characterized by cell rounding and an extended cytoplasm in fathead minnow (FHM) cells, were detected in 40/41 fish (98%). A high mortality rate (80%) resulted when supernatants of cell cultures showing CPEs were applied to previously healthy fish. KHV was detected by polymerase chain reaction in 6/41 fish (15%), but was not detected in supernatants obtained from cell cultures showing CPEs. These results suggest that KHV may not be the etiologic agent of the high mortality occurring among cultured carp in Korea; therefore, some other-as yet unidentified-infective agent must be responsible.

• Annals of Clinical Neurophysiology
• /
• 제5권1호
• /
• pp.16-20
• /
• 2003

Background: Mobile phone has become a very popular device used in everyday our lives. However, the possible hazard to human body such as brain tumor has been proposed intermittently. This unwanted possibility was calmed down due to the absence of definite evidence of hazard. This study was performed to see the effect of mobile phone use on the brain temperature. Methods: In 20 volunteers, we performed 4 steps of temperature measuring procedure. Four steps are pre-use (S1, basal state), wire-phone (S2, conventional telephone), PCS phone (S3, using 1,750~1,900 MHz), cellular phone (S4, using 820 MHz) states. Brain temperatures were measured by radiothermometer at 10 sites (5 sites in each hemisphere) of the brain after 5minutes of telecommunication through the phones. The final data were compared using paired t-test. Results: In PCS phone user group (Average; $35.73708^{\circ}C$), brain temperature decreased (with statistical significance, p<0.05), compared to those of non-user group (Average; $35.9527^{\circ}C$) or conventional wire phone user group. In cellular phone user group (Average; $35.82155^{\circ}C$), brain temperature decreased slightly (without statistical significance, p>0.05) compared to those of non-user group (Average; $35.9527^{\circ}C$) or conventional wire phone user group (Average; $35.922^{\circ}C$). The temperature change was not limited to the mobile phone applied side but on both hemisphere of the brain. Conclusion: In conclusion, mobile phone (especially PCS phone) decreased brain temperature in both hemispheres without side-to-side temperature difference. In addition, this study suggests possibility of radiothermometer application to the study of electromagnetic wave effect and protection method research in the future.

• 한국세라믹학회지
• /
• 제43권8호
• /
• pp.504-508
• /
• 2006

Functionally gradient porous $Al_2O_3-(t-ZrO_2)/HAp$ composites consist of 3 layers were fabricated using the multi-pass extrusion process at the various temperatures. The continuous pores were homogeneously formed in the $2^{nd}$ passed samples and their size was about $180{\mu}m$ in diameter. In the porous composites sintered at $1200-1400^{\circ}C$, the relative density and bending strength increased with the sintering temperature. The maximum values of relative density and bending strength in the $2^{nd}$ passed $Al_2O_3-(t-ZrO_2)/HAp$ composites were 62.2% and 107.8 MPa, respectively. In order to investigate the growth behavior of osteogenic cells on the functionally gradient porous $Al_2O_3-(t-ZrO_2)/HAp$ composites, an in vitro test was performed, using human osteoblast-like MG-63 cells. The cells were well attached and grown on the rough surface of the inside of the functionally gradient porous body.