본 연구는 실제 선박 주위의 점성 유동에 대해 RANS방정식을 사용하여 해석함으로써 그 계산 방법의 타당성 및 선형 설계에의 유효성을 입증하고, 모형선 크기에 따른 점성 유동의 영향, 즉 척도효과에 대한 기초 연구를 목적으로 하였다. 높은 레이놀즈수에서의 난류유동을 계산하기 위해 k-${\varepsilon}$ 난류모형을 채용하였으며, 물체 근처에서는 벽법칙을 사용하였다. 선체의 3차원 형상을 효과적으로 처리하기 위해 물체적합좌표계를 이용하여 실제영역에서 유도된 지배방정식을 계산영역으로 변환시켰으며, 유한체적법을 사용하여 이산화시켰다. 압력 계산은 SIMPlE법을 사용하였으며, 이산화된 식들은 TDMA를 이용한 선순법으로 해를 구하였다. 실제 계산대상 선박은 4410 TEU급 콘테이너 운반선과 50,000 DWT급 살물 운반선으로 모형선 크기와 실선 크기에 대해 점성유동을 해석하여 비교하였으며, 모형선에 대해서 저항시험, 프로펠러 면에서의 반류분포 조사 시험, 그리고 한계유선 조사시험을 수행하여 계산결과와 비교 검토하였다. 계산결과는 선미 유동장에서의 평균속도와 압력 분포에 있어서 선미 형상에 따른 효과와 척도효과를 잘 묘사하고 있다. 특히, 계산된 프로펠러 변에서의 반류분포와 선체 표변에서의 한계유선 분포는 실험과 정성적으로 잘 일치하고 있으며, 점성저항 추정에 있어서는 실험 값과 ${\pm}5%$ 이내로 예측하고 있음을 보여 주고 있어 선형 개발의 설계 도구로 활용될 수 있음을 알 수 있다.
연산 오계육은 오래전부터 건강기능 증진 및 치료 효능이 높은 것으로 알려져 왔다. 최근 천연물 단백질 유래 기능성 펩타이드 효능이 알려짐에 따라, 본 연구는 연산오계 부산물인 내장육 단백질로부터 고압처리기술과 프로티아제를 이용하여 펩타이드 생산 최적공정과 생성물의 특성을 연구하였다. 내장육의 가수분해는 효소 bromelain 과 내장육을 고압 반응기에 투입을 하여 실시하였다. 최적 공정 조건 확립을 위하여 고압처리기의 압력(30 - 100 MPa), 효소반응 시간 (1 - 5시간), 내장육의 양(10 - 30%)의 범위에서 수행되었다. 효소 반응 후 각 조건에 따른 내장육 단백질의 가수분해도, 생산 펩타이드들의 아미노산 및 분자량 분포를 분석하였다. 연구 결과 내장육 단백질 가수분해 최적조건으로 압력 90 MPa, 효소반응시간 3-4시간, 내장육의 함량 20%에서 결정 되었다. 최적조건에서 오계 내장육 단백질의 65% 이상이 가수분해 되었다. 대부분의 가수분해물의 분자량들은 400-1,000 Da 이하의 분포를 보여주어 대부분이 펩타이드로 판단되었다. 생산 펩타이드들은 비극성 소수성 아미노산들 42.3%, 극성 비전하 아미노산들 26.0%, 양 전하 아미노산들 13.3%, 음 전하 아미노산들 18.6% 로 분포되었다. 따라서 항산화 능력이 뛰어난 비극성 아미노산의 분포를 보아 건강 기능 식품 소재로서 활용할 가치가 높을 것으로 기대를 한다.
Kirchhoff 적분식을 이용하여 외부 음향 문제의 시간 영역 응답을 계산하는 경우, 주파수영역 해석과 마찬가지로 가상적인 내부 음향 모드에 기인한 비유일성 문제가 발생한다. 이를 해결하는 방법들 중의 하나로서 CHIEF(Combined Helmholtz Integral Equation Formulation) 방법이 쓰이는데, 이는 몇몇 내부 수음점의 응답을 0으로 추가하여 구속하는 조건을 부가하는 기법이다. 이 기법은 주파수 영역 경계요소법에서는 간편한 수식 때문에 많이 사용되고 있지만, 시간 영역에서는 사용된 예가 없다. 본 연구에서는 대상체 내부의 가상 수음점과 경계 표면의 절점들간의 최소 거리에 대한 지연시간을 고려하여, 계산하고자 하는 미지수인 현재 시간의 경계 표면 음장을 구속함으로써, 시간 영역 해석에 적합하도록 CHIEF 방법을 수식화하였다. 예제로서, 반지름 방향으로 진동하는 구의 음향 방사 문제를 다루었다. CHIEF 방법을 적용함에 따라 저차의 내부 음향 모드에 기인한 비유일성 문제를 해결할 수 있었고, 비요동 모드에 의한 수치적 불안정성을 피할 수 있었다. 그러나, 유효주파수 밖에 남은 내부 음향의 고차모드들에 의한 수치적 불안정성은 증가하였다.
산화처리 된 평직형태의 탄소섬유와 resole 형태의 페놀수지를 7:3 중량비로 혼합하여 성형공정에 따라 탄소섬유/페놀수지 복합재료를 제조하였으며, 이를 다시 불활성 분위기에서의 탄화(100$0^{\circ}C$) 및 $CO_2$ 분위기에서 활성화(700, 800,, 900 및 100$0^{\circ}C$)시켜 PAN계 활성탄소섬유/페놀수지 복합재료를 제조하였다. 본 연구에서는, 이렇게 제조된 복합재료에 활성화 온도가 미치는 영향을 중화 적정법에 따른 pH, 표면 산도 및 표면 염기도 등의 표면성질과 BET 방법에 따른 비표면적, 기공구조 등의 흡착특성을 측정하여 고찰하였다. 또한, ASTM에 따라 시편에 걸리는 압력 손실을 측정하였다. 결과적으로, 활성화 온도는 그 표면 성질의 변화에 영향을 주어, 90$0^{\circ}C$ 이상의 온도에서 시료의 표면은 점차 염기성이 커지는 것을 확인할 수 있었다. 또한, 비표면적, 총 기공 부피 및 기공 크기 분포도 등의 발달은 활성화 온도의 증가에 따라 점차 증가함을 쉽게 확인할 수 있으며, 그 중 활성화 온도가 90$0^{\circ}C$인 경우 가장 발달한 것으로 나타났다. 마찬가지로, 활성화 온도의 증가에 따라 시편 양 단면에 걸리는 압력손실은 점차 감소하였으며, 이것은 열처리 온도에 의한 활성탄소섬유 복합재료의 질량손실에 의한 것으로 사료된다.
In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.
본 논문은 자동차용 시트의 내부에 설치되어 탑승자의 등 부위를 지지하여 편안한 승차감을 제공하는 자동차용 시트의 플라스틱 서스펜션 어셈블리 개발에 관한 것이다. 운전자의 허리를 균등하게 지지하여 주는 구조를 갖도록 설계하고 시트 백 프레임과 플라스틱 서스펜션이 원활하게 조합될 수 있는 구조로 개발하고자 한다. 체압 분포 특성을 고려하여 서스펜션의 단품을 설계하고 기능성을 평가하였다. 또한 실제와 동일한 사이즈의 서스펜션을 모델링하고 구조해석을 수행하였다. 기존 스프링 서스펜션과 새로 개발된 플라스틱 서스펜션의 해석결과 및 실제 측정값이 유사함을 확인하고 최적의 해석 및 설계를 확립하였다.
Lee, Moo-Sik;Flammer, Andreas J.;Kim, Hyun-Soo;Hong, Jee-Young;Li, Jing;Lennon, Ryan J.;Lerman, Amir
Journal of Preventive Medicine and Public Health
/
제47권4호
/
pp.216-229
/
2014
Objectives: This study aims to investigate trends of cardiovascular disease (CVD) risk factor profiles over 17 years in percutaneous coronary intervention (PCI) patients at the Mayo Clinic. Methods: We performed a time-trend analysis within the Mayo Clinic PCI Registry from 1994 to 2010. Results were the incidence and prevalence of CVD risk factors as estimate by the Framingham risk score. Results: Between 1994 and 2010, 25 519 patients underwent a PCI. During the time assessed, the mean age at PCI became older, but the gender distribution did not change. A significant trend towards higher body mass index and more prevalent hypercholesterolemia, hypertension, and diabetes was found over time. The prevalence of current smokers remained unchanged. The prevalence of ever-smokers decreased among males, but increased among females. However, overall CVD risk according to the Framingham risk score (FRS) and 10-year CVD risk significantly decreased. The use of most of medications elevated from 1994 to 2010, except for ${\beta}$-blockers and angiotensin converting enzyme inhibitors decreased after 2007 and 2006 in both baseline and discharge, respectively. Conclusions: Most of the major risk factors improved and the FRS and 10-year CVD risk declined in this population of PCI patients. However, obesity, history of hypercholesterolemia, hypertension, diabetes, and medication use increased substantially. Improvements to blood pressure and lipid profile management because of medication use may have influenced the positive trends.
Most of the intake facilities of small agricultural reservoirs are conduits and they are regarded as serious defects due to the structural weakness that penetrates the body of the dam, and countermeasures are needed. This study suggests the application method of siphon type water intake facility by hydraulic model test and physical scale model test of siphon type water intake facility which has high safety and easy maintenance. Experimental results show that sufficient flow rate can be secured for the purpose of intaking water according to the differential head between the reservoir and the discharge part, and the flow rate can be controlled by the valve. The negative pressure was -31.5 kPa, and vibration and noise did not occur during the operation of the siphon. The maximum flow velocity in the discharge outlet was 1.11 m/s which meets the criterion for irrigation canals. Therefore, scour risk would be very low. As a result of the inflow distribution experiment, even if the inflow part is separated by only about 0.8 m, the flow velocity is remarkably decreased, so that the clogging by debris would not appear. When the pump was operated only once for the first time and the inside of the siphon was filled with water, continuous operation was possible by only valve operation. The results of this study are expected to be used for the design guidelines of the water intake facilities and improve safety and maintenance convenience of agricultural reservoirs.
Background: It is insufficient information that are syndrome differentiations and detail symptoms in Korean. Methods: 19 traditional korean medical agencies collected 190 cases with vital sign, body measurement, patient own symptoms report and doctor diagnosis. And then we analyzed general distributions and comparisons of deficiency and non-deficiency. Results: The most past histories, in order, were the arthritis(20%), gastroenteropathy, hypertension, anemia, diabete mellitus. In chief complains, musculoskeletal occupies 60 percent of the total, and digestive system, head in order. In the syndrome differentiation, it appeared deficiency, spleen, Qi deficiency in order. Age(p=0.000), systolic blood pressure(p=0.044) and the waist-hip ratio(p=0.000) was significantly higher in the deficiency group compared with non-deficiency group. Patients with condition which dislikes the wind and with anxiety and with amazing and fear(驚恐) were significantly more in deficiency group(p=0.029, p=0.017, p=0.044). Conclusions: These statistics are continually revised report and it will be reported comparison of several syndrome differentiations and therapeutic effects by treatment methods.
The unique features of spark plasma sintering process are the possibilities of a very fast heating rate and a short holding time to obtain fully dense materials. $\beta$-SiC powder with 0, 2, 6, 10 wt% of $\alpha$-SiC particles (seeds) and 4 wt% of Al-B-C (sintering aids) were spark plasma sintered at $1700-1850^{\circ}C$ for 10 min. The heating rate, applied pressure and sintering atmosphere were kept at $100^{\circ}C/min$, 40 MPa and a flowing Ar gas (500 CC/min). Microstructural development of SiC as function of seed content and temperature during spark plasma sintering was investigated quantitatively and statistically using image analysis. Quantitative image analyses on the sintered SiC ceramics were conducted on the grain size, aspect ratio and grain size distribution of SiC. The microstructure of SiC sintered up to $1700^{\circ}C$ consisted of equiaxed grains. In contrast, the growth of large elongated SiC grains in small matrix grains was shown in sintered bodies at $1750^{\circ}C$ and the plate-like grains interlocking microstructure had been developed by increasing sintering temperature. The introduction of $\alpha$-SiC seeds into $\beta$-SiC accelerated the grain growth of elongated grains during sintering, resulting in the plate-like grains interlocking microstructure. In the $\alpha$-SiC seeds added in $\beta$-SiC, the rate of grain growth decreased with $\alpha$-SiC seed content, however, bulk density and aspect ratio of grains in sintered body increased.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.