• 한국의류학회지
• /
• 제40권1호
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.256-259
• /
• 2005

Analysis of behavior pattern and thermal response during bathing and showering provides important fundamental data when developing an automatic bathing/showering system. The behavior pattern and physiological changes during bathing/showering were measured und analyzed for the aged male group. We recorded the volunteers showering at front, back, left and right view using four CCTV cameras in order to study the behavior pattern during showering. The photographic data were analyzed by counting the frequencies of body contact and identifying zones where hands could reach. In order to study the thermal response, we measured the blood pressure (B.P), heart rate (H.R), body temperature (B.T.), breathing rate (B.R) for the different water temperatures and the locations of immersion for the young and old age groups. The results showed that the frequencies of body contacts were varied for different body sections. Also there were some body sections where hands could not be reached because of reduced pliability and muscular strength of the aged group. But we observed rather uniform body contact frequencies when a towel was used. In partial immersion bath experiments, we observed the changes of B.P. H.R and B.T in the case of young and old age groups, and the changes were more significant in the young age group.

• 패션비즈니스
• /
• 제25권3호
• /
• pp.144-158
• /
• 2021

The purpose of this study is to develop a bodice block suitable for women in their 20s with turtle neck syndrome. The problem of turtle neck syndrome body type was derived through the evaluation of bodice blocks. First, the length of the front bodice was longer and the length of the back bodice was shorter. Second, the front neck point, back neck point, and the shoulder line were not in place. Third, the side neck was pushed up. Fourth, the length of armhole was long and it floated. Fifth, the front hem was attached to the body and the back hem was away from the body. A finally developed pattern was designed by developing four test patterns to solve the problem that appeared in a selected bodice pattern, and a t-test was conducted to determine the difference in the appearance evaluation by virtual clothing between the two patterns, bodice block and the development pattern. According to the result, the fit was not good from the side body because the position of the side neck point was not in a place due to the characteristics of the body shape of turtle neck syndrome, but the problems of the anterior neck position, the position of the back neck point, the shoulder line position, and the armhole shape were improved in the developed pattern.

• 복식문화연구
• /
• 제19권6호
• /
• pp.1205-1220
• /
• 2011

The purpose of this study is to verify the change of body posture by putting on the late $19^{th}$ century English women's bodice or waistcoat. This study analyzed the female somatotype which puts on upper garments of Victorian era with using 3D body scan technology. Two sets of $19^{th}$ century women's bodice and waistcoat patterns were developed with the $19^{th}$ century model size and those patterns were used for making the experimental garments. The fit of experimental garments was evaluated by the degree of change with posture and waist measurements. Three women with the same waist girth measurements with the model size were participated to the fitting test. The postural change was measured from cross-sectional body diagrams. The result of this study showed that the waist measurement of the late $19^{th}$ century English women's bodice and waistcoat pattern was smaller than the waist girth measurement. These garments compressed the midriff of the body and it made women's distinct body silhouette. The waist girth measurement of 1876 bodice pattern was 9.2cm smaller than presented model size. The subjects' waist girth measurements were shortened by 5.0~6.1cm after wearing the 1876 bodice garment. The waist girth measurement of 1880 waistcoat pattern was 7.1cm smaller than presented model size. The subjects' waist girth measurements were shortened by 2.7~3.7cm after wearing the 1880 waistcoat garment. The back side parts of their waist were compressed and their postures were changed. The neck and shoulders were moved forward after wearing the experimental garments. These results showed that body posture could be changed to "S" shape silhouette as wearing the late $19^{th}$ century English women's bodice or waistcoat.

• 패션비즈니스
• /
• 제16권1호
• /
• pp.103-120
• /
• 2012

The study aimed to evaluate the appearance of the men's work clothes jumpers developed to suggest the prototype work clothes jumper patterns by using the 3-D clothing simulation technology. The 3-D simulated clothing images considered the upper body features of men in the age range between 20 and 59 in South Korea. A questionnaire survey conducted previously suggested a basic jumper style with shirt collar and snap opening cuffs for the heavy industry workers; and discomforting parts of the work clothes jumper of the subject workers have been referred to for the experimental jumper appearance test. Besides, defining the measurements of men's upper bodies enabled to generate the men's 3-D virtual models representing each age group's average body feature. The significant body measurement factors for men's 3-D body modeling and jumper pattern-making were stature for the height factor; chest, waist and hip circumferences for the circumference factor; waist back, hip and arm lengths and interscye front/back for the length factor; and back neck breadth for the breadth factor and armscye and scye depths for the depth factor. The men's body measurements of 30's were implemented to three experimental jumper pattern-making methods, i.e. the 1st method using the relations based on stature and chest circumference; the 2nd method using the direct body measurements; and the 3rd method adopting the maximum ease amount of given body measurements whether relations or direct measurements except the direct measurement of scye depth. A comparison among the three experimental jumpers' simulated images highlighted that the appropriate ease amount of the jumper gained higher scores in terms of the jumpers' front, side, back and sleeve parts and the total silhouettes. Therefore the 3rd experimental jumper was finally selected for the heavy industry workers.

• 한국의류학회지
• /
• 제33권1호
• /
• pp.68-79
• /
• 2009

It is inevitable to have cutting line to get the 2D pattern from 3D body surface. In this paper the efficiency of curvature plot as a cutting line in the process of flattening 3D surface was investigated. As reference, basic clothing construction line was adopted to divide the 3D surface into small blocks to make the flattening process easy. Female dummy as well as human body were scanned and surface of the upper body was segmented using curvature plot and basic constructing line. 2D tight-fit pattern was developed using three software, the RapidForm 2004, 2C-AN and Yuka CAD. Gap between clothes and body, and the clothing pressure on the body was observed to determine the fit of the clothes. As results, clothes constructed with blocks divided by curvature plot displayed a similar level of tight fit as compared with those by basic construction line. It was found that curvature plot is effective method as a segmentation of the 3D surface even for the actual body which does not have any previous reference line. It is expected that application of curvature plot will be expanded in 3D apparel technology.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.309-320
• /
• 1991

The purpose of this study was to develope a pattern drafting method for various somatotype which contribute largely to increase the fitness and comfort of garments. This study had 8 subjects who were college girls who had prominent somatic characteristics. The study was carried out by the following procedures. 1. The 8 subjects who had prominent somatic characteristics were cheesed by photograph- ing. The somatotypes of 8 subjects were classified into Standard somatotype, Turning over somatotype, Bending somatotype and Turning over-Bending somatotype. 2. Under the criterion of the body surface development, the comparative investigation on the pattern and the sensory evaluation were accomplished in the flat pattern method and the draping pattern method. 3. The body surface development of them were made by the draping pattern method. 4. In the result of the comparative investigation and the sensory evaluation, it was found that the flat pattern had better appearance and comfort than the draping pattern, and the draping pattern included more somatic characteristics than the flat pattern. 5. On the basis of those result, the pattern drafting method according to the somatotype was indicated and it was examinated by the clothing experiment. 6. The sensory evaluation for appearance and comfort was applied to evaluate the new basic pattern for four somatotype by comparing it with the conventional basic pattern (Rim, won ja' 5). The result of the sensory evaluation, it was found that the new basic pattern was more suitable for each somatotype than the conventional basic pattern.

• 복식문화학회:학술대회논문집
• /
• 복식문화학회 2005년도 Joint International Conference
• /
• pp.48-54
• /
• 2005

In order to mass-customize clothes, it is essential to take into account individual body shape using computerized 3D body models. This paper describes the development of an interactive body model that can be altered to match individual body perimeter, postures and depth for the purpose of computerized pattern making. Construction of the body model requires the extraction of necessary points, adjustment of coordinate points, linking of points by spline curves, control of section lengths and selectability of various hip types. Front to back depth of the model is adjusted by scaling ratio. We had a great result for controlling perimeter, posture and depth of body shapes. The results support the adaptability and potential usefulness of the posture and depth adjustable body model.

• 대한한의진단학회지
• /
• 제10권1호
• /
• pp.54-63
• /
• 2006

Objectives: In this study a pattern questionnaire for damum patterns was developed by means of literature review and statistical analysis. The individual approach of korean medicine is based on the concept of pattern identification, the objectivity and validity issues of which hold important meaning in the pratice and research. Methods: Review of literatures led to the selection of 22 items describing Dam or Um pattern. A preliminary questinnaire consisted of these items that may be scored with positive score at zero to seven. Results: Damum is all over the body syndromes. That is abnormal body conditions. Damun arouse body pain, breath disorder, digestion disorder, nerves disorder, excretion disorder. Conclusions: Review of literatures led to selection of 29 items describing Damun. A questionnaire is in preparation.

• 한국의류학회지
• /
• 제21권2호
• /
• pp.396-405
• /
• 1997

The purpose of this study was to investigate the wearing condition according to different basic slacks'patterns and to provide fundamental data on structuring slacks' pattern using the multi-dimensional measuring method. 3 different kinds of basic slacks' patterns (A, B, C) were used and cross-sectional measurements of 6 parts were analysed. The results were as follows; 1) It revealed that the girth of waist, hip and thigh effected the degree of ease amounts. 2) Moira pattern shape fully supported that the considerable body parts affected the change of ease amounts. 3) Basic pattern A was usually expected to be suitable for standard-sized or unmarried women who had not experienced body-type change. 4) Basic pattern B and C were suitable for large-sized or married women whose body·type had changed. Therefore the crotch length and depth, gredient of center back line has to be set up accurately.