• 제목/요약/키워드: Body Measurement

검색결과 2,443건 처리시간 0.026초

성별 및 연령에 따른 3차원 인체측정에 대한 태도 비교 (Gender and Age Differences in Attitude toward 3-D Body Scanning)

  • 박재경;최경미;남윤자;이유리
    • 한국의류학회지
    • /
    • 제32권8호
    • /
    • pp.1244-1254
    • /
    • 2008
  • The purpose of this research is to compare the people’s attitude toward 3-D body scanning by their gender and age in order to provide the application of 3-D body scanning data for new services or products. This study collected questionnaire data from 442 Korean females and 258 Korean males who participated in the 3-D body scanning. The result of this study were as follows: 1. Most people had good feelings for 3-D body scanning. Male respondents were more dissatisfied than female, and teenagers had higher dissatisfaction rate than other age groups for the measurement garment. 2. 80.5% of all respondents had the intention for re-measurement of 3-D body scanning. Male respondents and teenagers had low intention for re-measurement. 3. For the use of 3-D body scanning data, 79.6% said "yes" for making avatar, and 88.3% agreed with the custom made clothes. There was no difference between gender and age for this question. The results of the study will demonstrate how clothing retailers and marketers can use the 3-D body scanning data.

뒤꿈치 들기 자세를 이용한 전신진동 운동이 외발서기 시 근신경 반응에 미치는 영향 (Effects of Consecutive whole Body Vibration Exercise using Heel Raise Posture on Neuromuscular Response during Single-leg Stance)

  • Kim, Dae Dong;Lee, Myeounggon;Youm, Changhong
    • 한국운동역학회지
    • /
    • 제31권2호
    • /
    • pp.104-112
    • /
    • 2021
  • Objective: This study aimed to analyze the effects of consecutive whole body vibration through heel raise posture on the center of pressure and electromyography of anterior tibial muscle, lateral gastrocnemius and soleus muscles during single-leg stance. Method: The subjects of this study included 30 healthy males in their 20's, with the following inclusion criteria: no history of orthopaedic medical history, no participation in regular exercises, no history of whole body vibration exercise, and right leg being the dominant leg. The experimental procedure involved pretreatment measurement of eye open single-leg stance, application of whole body vibration for 30 seconds, post-treatment measurement (3 measurements in total). Static and dynamic movements have been measured over 2 separate experiments, with 72 hours gap between the experiments. Static movement involved maintaining single-leg heel raise posture for 30 seconds while applying whole body vibration, and dynamic movement involved heel raise (15 repetitions over 30 seconds) while applying whole body vibration. The strength of applied whole body vibration was 35 Hz frequency and 2~4 mm amplitude. Results: As the single-leg posture after static heel raise posture, mediolateral velocity of the center of pressure at post 2 and post 3 were significantly reduced compared to the pre-treatment measurement. In addition, the percentage for reference voluntary contraction in anterior tibial muscle and soleus and median frequency at anterior tibial muscle and lateral gastrocnemius muscle at post 3 were significantly decreased compared to the pre-treatment value. As the single-leg posture after dynamic heel raise posture, the mediolateral 95% edge frequency of the center of pressure and median frequency at anterior tibial muscle, lateral gastrocnemius muscle, and soleus muscle at post 3 were significantly reduced compared to the pre-treatment value. Conclusion: Acute whole body vibration via static and dynamic heel raise posture have positive effect on mediolateral posture control during single-leg stance.

Determination of counting efficiency considering the biodistribution of 131I activity in the whole-body counting measurement

  • MinSeok Park ;Jaeryong Yoo;Minho Kim ;Won Il Jang ;Sunhoo Park
    • Nuclear Engineering and Technology
    • /
    • 제55권1호
    • /
    • pp.295-303
    • /
    • 2023
  • Whole-body counters are widely used to assess internal contamination after a nuclear accident. However, it is difficult to determine radioiodine activity due to limitations in conventional calibration phantoms. Inhaled or ingested radioiodine is heterogeneously distributed in the human body, necessitating time-dependent biodistribution for the assessment of the internal contamination caused by the radioiodine intake. This study aims at calculating counting efficiencies considering the biodistribution of 131I in whole-body counting measurement. Monte Carlo simulations with computational human phantoms were performed to calculate the whole-body counting efficiency for a realistic radioiodine distribution after its intake. The biodistributions of 131I for different age groups were computed based on biokinetic models and applied to age- and gender-specific computational phantoms to estimate counting efficiency. After calculating the whole-body counting efficiencies, the efficiency correction factors were derived as the ratio of the counting efficiencies obtained by considering a heterogeneous biodistribution of 131I over time to those obtained using the BOMAB phantom assuming a homogeneous distribution. Based on the correction factors, the internal contamination caused by 131I can be assessed using whole-body counters. These correction factors can minimize the influence of the biodistribution of 131I in whole-body counting measurement and improve the accuracy of internal dose assessment.

K-SMPL: 한국인 체형 데이터 기반의 매개화된 인체 모델 (K-SMPL: Korean Body Measurement Data Based Parametric Human Model)

  • 최별이;이성희
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제28권4호
    • /
    • pp.1-11
    • /
    • 2022
  • 선형 스키닝 기반 3D 인체 생성 모델 SMPL (Skinned Multi-Person Linear Model)은 1990년대 미국 거주 미국인들 3천 8백여명을 대상으로 만들어진 3D 신체 데이터베이스인 CEASAR 로부터 최적화 기법을 통해 만들어진 가장 널리 쓰이는 통계적인 3D 모델이다. 본 연구는 한국인 체형의 통계적 특성을 보다 정확히 표현하는 SMPL기반의 한국인 체형 3D 모델을 제안한다. 이를 위해 우리는 한국인 여성 2천7백여명의 신체 각 부위의 실측 데이터에 기존 3D SMPL 모델을 피팅하는 비선형 최적화 알고리즘을 개발한다. 이를 사용하여 한국인 3D 신체 데이터베이스를 구축하고, 주성분 분석 방법으로 한국인 체형 기반 매개화된 3D 모델을 개발한다. 본 연구를 통해 제안하는 한국인의 체형적 특징을 가진 블렌드쉐입과 새로운 체형 파라미터는 기존 모델이 표현하는 체형에 비해 한국인 체형 데이터 특성을 잘 반영함을 확인하였다. 뿐만 아니라, 우리의 모델은 SMPL에 비해 신체 실측 데이터에 대한 피팅 정확도를 개선함을 확인하였다. 제안된 모델은 향후 아바타 생성이나 인체 형상 측정 등 다양한 용도로 사용될 수 있다.

체형 측정의 정확도를 높이기 위한 3차원 영상 기반의 체형 측정 활용 (Using 3D image-based body shape Measurement to increase the accuracy of body shape Measurement)

  • 소지호;전영주
    • 문화기술의 융합
    • /
    • 제6권4호
    • /
    • pp.803-806
    • /
    • 2020
  • 3차원 영상을 활용한 체형 측정 방식은 최근 3차원 측정 카메라와 알고리즘의 발전으로 인하여 보편적으로 활용되고 있다. 기존의 3차원 영상 장비들은 고가의 장비들로 보편화에 한계가 있었다. 최근 저렴한 3D 카메라와의 보급과 다양한 측정 방식의 발달로 인하여 여러 가능성을 보이고 있다. 이는 정확한 데이터 수집을 필요로 하는 의료기기 시장에 많은 영향을 미칠 수 있을 것으로 보인다. 인공지능을 활용한 다양한 의료기기 제품들이 등장하고 있는데 정확한 인공지능 알고리즘을 개발하기 위해서는 정확한 데이터 수집이 가장 중요하다. 3차원 영상을 활용한 인공지능 알고리즘 개발에 3D 카메라를 활용한 수집 장비들은 주요한 요소로 작용할 것으로 보여진다.

한국인 청소년 신장과 체중의 시대적 변천에 따른 통계학적 추정치에 관한 연구 (Statistical Estimate and Prediction Values with Reference to Chronological Change of Body Height and Weight in Korean Youth)

  • 강동석;성웅현;윤태영;최중명;박순영
    • 보건교육건강증진학회지
    • /
    • 제13권2호
    • /
    • pp.130-166
    • /
    • 1996
  • As compared with body height and body weight by ages and sexes, by means of the data reported under other researchers from 1967 to 1994 for 33 years, this study obtained the estimate value of body height and body weight by ages and sexes for the same period, and figured out prediction value of body height and body weight in the ages of between 6 and 14 from 1995 to 2000. These surveys and measurements took for one year from October 1st 1994 to September 30th. As shown in the 〈Table 1〉, in order to calculate the establishment, estimate value and prediction value of the chronological regression model of body height and body weight, by well-grounded 17 representative research papers, this research statistically tested propriety of liner regression model by the residual analysis in advance of being reconciled to simple liner regression model by the autonomous variable-year and the subordinate variable-body weight and measured prediction value, theoretical value from 1962 to 1994 by means of 2nd or 3rd polynomial regression model, with this redult did prediction value from 1995 to 2000. 1. Chronological Change of Body Height and Body Weight The analysis result from regression model of the chronological body height and body weight for the aged 6 - 16 in both sexes ranging from 1962 to 1994, corned from the 〈Table 2-20〉. On the one hand, the measurement value of respective researchers had a bit changes by ages with age growing, but the other hand, theoretical value, prediction value showed the regular increase by the stages and all values indicated a straight line on growth and development with age growing. That is, in case of the aged 6, males had 109.93cm in 1962 and females 108.93cm, but we found the increase that males had 1I8.0cm, females 1I3.9cm. In theoretical value, prediction value, males showed the increase from 109.88cm to 1I7.89cm and females from 109.27cm to 1I5.64cm respectively. There was the same inclination toward all ages. 2. Comparision to Measurement Value and Prediction Value of Body Height and Body Weight in 1994 As shown in the 〈Table 21〉, in case of body height, measurement value and prediction value of body height and body weight by ages and sexes almost showed the similiar inclination and poor grade, in case of body weight, prediction value in males had a bit low value by all ages, and prediction value in females had a high value in adolescence, to the contrary, a low value in adult. 3. Prediction Value of Body Height and Body Weight from 1995 to 2000 This research showed that body height and body weight remarkably increased in adolescence but slowly in adult. This study represented that Korean physique was on the increase and must be measured continually hereafter.

  • PDF

초음파법에 의한 피하지방두께의 측정과 신체조성 (Body composition and measurement of subcutaneous fat thickness by ultrasonic method)

  • 성수광;장수정
    • 대한인간공학회지
    • /
    • 제13권1호
    • /
    • pp.47-58
    • /
    • 1994
  • The purpose of this study was to obtain the basic data for a design for comfort wear. The subjects of this study were 197 women's university stu- dents. The characteristics of their body types and the thickness of subcuta- neous fat at eight body sites were measured. The thickness of subcutaneous fat was measured by both Ultrasonics and with a Skinfold Caliper. The cor- relation between their values and the thickness of subcutaneous fat were compared. The relationship between Rohrer Index and the subject's self- conception of their body was also compared. The results were as follows: 1. The measurement of thickness of subcutaneous fat at triceps and scapula was a little lower, in using Skinfold Caliper method, than Ultrasonics method because of the pressure of the caliper. 2. Correlation between percentage of fat in body and body characteristics was high in order of chest girth > weight > abdomen girth. 3. The thickness of subcutaneous 8 body these sites was high in order of thigh > triceps > scapula > abdomen > suprailiac > chest > calf > forearm. Percentage of body fat has a positive correlation with both average thickness of subcutaneous fat and thickness of subcutaneous fat at triceps. 4. Rohrer Index shows a positive correlation between average thickness of subcutaneous fat and percentage of body fat. 5. About half of subjects of this study thought that they were obese although the data proved otherwise.

  • PDF

인체 영역 통신 환경에서의 초광대역 방사 측정 (UWB Propagation Measurements in Body Area Network Scenarios)

  • 이준용;김창경;하동우
    • 전자공학회논문지
    • /
    • 제49권11호
    • /
    • pp.36-43
    • /
    • 2012
  • 본 논문에서는 인체 영역 통신 환경에서의 초광대역 방사측정 결과를 개시한다. 인체 주변 통신 및 인체 표면 통신 환경에서의 다양한 시나리오를 고려하였으며, 시간 영역 및 주파수 영역에서 측정을 진행하였다. 인체 주변 통신 환경의 경우, 인체의 특정 부위가 가시선을 가로막을 경우 발생하는 회절 현상에 대한 분석을 수행하였다. 인체 표면 통신 환경에서의 측정 결과는 인체 주변 통신 환경에 비해 더 복잡한 방사 형태가 나타나며 안테나 특성도 영향을 받게 됨을 알 수 있었다.

중국 상해지역 20대 전반 여성의 체형연구 (A Study on the Body Types of Women in the 20's Residing in Shanghai, China)

  • 강연경;손희순
    • 패션비즈니스
    • /
    • 제12권5호
    • /
    • pp.24-38
    • /
    • 2008
  • As an attempt to improve the seaming of clothes exported to China, this study is intended to strengthen the clothing industry in Korea by providing data on the body figures of Chinese women. Direct measurement was conducted on 193 women aged 19-24 residing in Shanghai, China. Then we classified and identified the body types and characteristics of Chinese women based on the drop values suggested by the National Standard of the People's Republic of China(GB/T 1335.2-1997). The following is a summary and conclusion of this study. 1. The following results were obtained by measuring the body sizes of women aged 19-24 living in Shanghai, China. 2. After having conducted a factor analysis on 111 body measurement items, 15 index items, and 11 calculation items, we were able to deduce a total of 6 factors. 3. We categorized the body types of 19-24 year-old women living in Shanghai, China according to the drop values suggested by GB/T 1335.2-1997 where D-type was added to Y, A, B, and C-types for a total of 5 categories. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type.

입체 형상 분석을 위한 3차원 계측시스템의 활용 -WBS와 RapidForm 2004를 중심으로- (Applications of Three-Dimensional Measurement System for Shape Analysis -Focused on WBS and RapidForm 2004-)

  • 이명희;정희경
    • 복식
    • /
    • 제55권5호
    • /
    • pp.55-64
    • /
    • 2005
  • The concern with three-dimensional measurement has been growing in recent years. And over the last few years, several studies have been made on three-dimensional measurement. Some of the studies using a three-dimensional measurement have focused on type of form of human body and evaluation of fitness. But there has been no study about applications of three-dimensional measurement system for shape analysis. So, the purpose of this study was to investigate about application of three-dimensional mea-surement system lot shape analysis. The instrument and tools for three-dimensional measurement was Whole Body 3D scanner(model name: Exyma-WBS2H). Analysis program used in experiment is Rapid Form 2004 PPI (INUS technology, Int, Korea). The following results were obtained; 1. The point data using three-dimensional measurement system built 3D model. 2. The three-dimensional data were used to analyze length and curvature of shape. 3. The shape using three-dimensional measurement system could be used in variety field.