• 한국운동역학회지
• /
• 제15권4호
• /
• pp.169-179
• /
• 2005

In the 500m short track speed skating, the matter of who reaches the first corner first can important factor since each competitor races with all speed from the start to the first line. A filed study was attempted to kinematical estimation six female foreign skaters, who participated in the 500m female final round competition, and two Korea skates during the World Short track Skating Championship. The three dimensional motion analysis with DLT method was executed using four video cameras for analyzing the actual competition situation. In point of analyzing the actual competition situation, it is expected that skaters and coaches the effective informations, and the following conclusions are drawn; The elapsed time by phase in start motion of the foreign skaters appeared shorter those of Korea skaters, so the start training of Korea skaters should be strengthed. Also the displacement of C.G in the foreign skaters appeared shorter displacement than those of Korea skaters. Especially in the starting position, the foreign skaters are superior to Korea skaters in displacement of first(left) and next following stroke(right). The velocity of C.G and maximum velocity of skate blade of foreign skaters art faster than those of Korea skaters. And the foreign skaters show the superior early velocity change. Both of leaning body angle, and left and knee angle of the foreign skaters lead to positive point of having the propulsive force in the early starting position. Observing in the most prominent feature of foreign and Korea skaters in start phase, foreign skaters skate quickly the third stroke. These features of Korea skaters would appear disadvantage of location selection in entering the coner course.

• 한국분말재료학회지
• /
• 제25권1호
• /
• pp.25-29
• /
• 2018

Porous Cu with a dispersion of nanoscale $Al_2O_3$ particles is fabricated by freeze-drying $CuO-Al_2O_3$/camphene slurry and sintering. Camphene slurries with $CuO-Al_2O_3$ contents of 5 and 10 vol% are unidirectionally frozen at $-30^{\circ}C$, and pores are generated in the frozen specimens by camphene sublimation during air drying. The green bodies are sintered for 1 h at $700^{\circ}C$ and $800^{\circ}C$ in $H_2$ atmosphere. The sintered samples show large pores of $100{\mu}m$ in average size aligned parallel to the camphene growth direction. The internal walls of the large pores feature relatively small pores of ${\sim}10{\mu}m$ in size. The size of the large pores decreases with increasing $CuO-Al_2O_3$ content by the changing degree of powder rearrangement in the slurry. The size of the small pores decreases with increasing sintering temperature. Microstructural analysis reveals that 100-nm $Al_2O_3$ particles are homogeneously dispersed in the Cu matrix. These results suggest that a porous composite body with aligned large pores could be fabricated by a freeze-drying and $H_2$ reducing process.

• 한국어류학회지
• /
• 제20권1호
• /
• pp.7-12
• /
• 2008

돌마자 M. yaluensis 정자의 변형과정과 성숙한 정자의 미세해부학적 구조를 전자현미경으로 관찰하였다. 돌마자 정자형성과정에서 발생되는 편모는 핵의 한쪽 측면에서 발생하여 계속 신장되고 있어 잉어과 정자변형과정과 공통된 type 2로 분류할 수 있으며 성숙한 돌마자 정자의 두부 측면에 위치한 편모구조는 정자변형과정에서 핵의 회전이 일어나지 않았다는 것을 입증하고 있다. 두 중심립의 각도만큼 편모와 두부의 각도가 만들어지며 잉어과 어류 정자에서 두부와 편모는 두 중심립의 각도만큼 기울어져 있었다. 정자변형과정 중에 중심립 주변에서 관찰되는 골지체는 편모의 확장과 핵와 안으로 이동하는 데 필요한 물질을 제공하는 것으로 추정되며 정자변형과정 후기에는 관찰되지 않았다. 돌마자 정자의 세포질에서 나타나는 vesicles 구조는 중편보다 편모에서 많이 분포하며, 정자 편모의 vesicles은 기부에 주로 분포해 있으며 말단부에서는 나타나지 않는다. 중편세포질에 분포하는 미토콘드리아는 비대칭적으로 분포해 있으며, 미토콘드리아의 비대칭적 분포는 잉어류에서는 일부 종을 제외한 공통적인 특징인 것으로 사료된다.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.147-157
• /
• 2017

최근에는 슈퍼-픽셀 (super-pixel)은 컴퓨터 발전 응용에 널리 사용되고 있다. 슈퍼 픽셀 알고리즘은 픽셀을 지각적으로 실행이 가능한 영역으로 변환하여 그리드 픽셀의 경직된 특징을 줄일 수 있다. 특히, 슈퍼 픽셀은 깊이 추정, 골격 작업, 바디 라벨링 및 기능 국소화 등에 사용된다. 그러나 이러한 작업을 수행하기 위해 우수한 슈퍼 픽셀 파티션을 생성하는 것은 쉽지 않다. 특히 슈퍼 픽셀은 비합, 지속, 폐쇄, 지각 불변과 같은 형태 측면을 고려할 때보다 의미있는 특징을 만족시키지는 못한다. 본 논문에서는 단순 선형 반복 클러스터링과 퍼지 클러스터링 개념을 결합한 고급 알고리즘을 제안한다. 단순 선형 반복 클러스터링 기술은 이미지 경계, 속도, 메모리 효율이 기존 방법보다 높다. 그것은 형태 측면의 맥락에서 슈퍼 픽셀 형태에 대해 양호하게 작거나 규칙적인 특성을 제안하는 것은 아니다. 퍼지 유사성 측정은 제한된 크기와 이웃을 고려하여 합리적인 그래프를 제공한다. 보다 작고 규칙적인 픽셀을 얻으며 부분적으로 관련된 특징을 추출 할 수 있다. 시뮬레이션은 퍼지 유사성 기반 슈퍼 픽셀 생성은 사람의 이미지를 분해하는 방식으로 자연적 특징을 대표적으로 나타낸다.

• 치과방사선
• /
• 제7권1호
• /
• pp.49-52
• /
• 1977

The authors had observed a case of cleidocranial dysostosis of 42 years old unmarried woman. The observation was founded upon roentgenogram of skull P-A view, orthopantomograph, cephalometric view, chest P-A view and wrist X-ray view. The patient gave a dwarfic impression with 145㎝ body height and concaved mandibular prognastic facial feature. The palate was narrowed and extremely high arched. The eruption state of teeth were extremely poor, only four teeth were erupted, composed of upper third molar and lower three deformed teeth. The skull P-A view of roentgenogram reveals overlying metopic suture, extends from the nasion to the sagittal suture, and the suture are delayed up to date and many wormian bones are formed. On the cephalometric view the maxilla is underdeveloped and produce the false mandibular prognathism. Twenty four impacted teeth can be detected by orthopantmograph, twelve in upper jaw and twelve in lower jaw. There are many supernumerary teeth, one in upper jaw and seven in lower jaw. On the chest P-A view, the clavicles are totally aplastic, but a vestige of clavicle is visible in the right side. On the wrist roentgenogram, the epiphyseal ossification of distal phalanx, mesial phalanx and proximal phalanx is delayed.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.339-342
• /
• 2017

이미지의 기하학적 변형은 이미지 보정을 위해 사용되며 컴퓨터 비전 분야에서 강체 변환, 유사변환 등 많은 방법이 존재한다. 그 중에서도 워핑은 원근감이 있는 이미지에서 많이 활용되는 이미지 보정 방법이다. 일반적으로 워핑을 수행하기 위해서는 워핑할 위치에 대한 특징 점 4개를 추출해 워핑을 수행한다. 그러나 워핑 지점을 정확한 추출이 어려우며, 추출된 4개의 점을 이용해 원근 영상 보정을 할 경우 원본 이미지와 보정 후 영상과의 특정 부분 픽셀이 3~4픽셀 이상으로 오차가 나타나게 된다. 그렇기 때문에 본 논문에서는 정확한 워핑 결과를 가져오기 위해 템플릿 매칭을 이용해 워핑 할 부분의 4개점을 보다 정확하게 추출하고, 추출된 4개점들 중 2개의 점 각각에 대해 주변 3 by 3 영역으로 점을 이동 시켜 총 81번의 반복을 워핑 통해 이미지 보정하는 형태이다. 이와 같이 2개의 점을 주변 3 by 3 위치로 이동 시키면서 오차 픽셀이 1픽셀 이하로 나는 최적의 위치 즉, 최적 결과를 가져오는 4개의 점을 선정한 후 그 점들로 이미지 보정을 진행하여 최적의 결과를 가져올 수 있다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.8-22
• /
• 2014

In the past few decades, CMOS logic technologies and devices have been successfully developed with the steady miniaturization of the feature size. At the sub-30-nm CMOS technology nodes, one of the main hurdles for continuously and successfully scaling down CMOS devices is the parametric failure caused by random variations such as line edge roughness (LER), random dopant fluctuation (RDF), and work-function variation (WFV). The characteristics of each random variation source and its effect on advanced device structures such as multigate and ultra-thin-body devices (vs. conventional planar bulk MOSFET) are discussed in detail. Further, suggested are suppression methods for the LER-, RDF-, and WFV-induced threshold voltage (VTH) variations in advanced CMOS logic technologies including the double-patterning and double-etching (2P2E) technique and in advanced device structures including the fully depleted silicon-on-insulator (FD-SOI) MOSFET and FinFET/tri-gate MOSFET at the sub-30-nm nodes. The segmented-channel MOSFET (SegFET) and junctionless transistor (JLT) that can suppress the random variations and the SegFET-/JLT-based static random access memory (SRAM) cell that enhance the read and write margins at a time, though generally with a trade-off between the read and the write margins, are introduced.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.262-270
• /
• 2004

Basic experiments were carried out using the THT-IV low-power Hall thruster to examine the influences of magnetic field shape and strength, and acceleration channel length on thruster performance and to establish guidelines for design of high-performance Hall thrusters. Thrusts were measured with varying magnetic field and channel structure. Exhaust plasma diagnostic measurement was also made to evaluate plume divergent angles and voltage utilization efficiencies. Ion current spatial profiles were measured with a Faraday cup, and ion energy distribution functions were estimated from data with a retarding potential analyzer. The thruster was stably operated with a highest performance under an optimum acceleration channel length of 20 mm and an optimum magnetic field with a maximum strength of about 150 Gauss near the channel exit and with some shape considering ion acceleration directions. Accordingly, an optimum magnetic field and channel structure is considered to exist under an operational condition, related to inner physical phenomena of plasma production, ion acceleration and exhaust plasma feature. A new Hall thruster was designed with basic research data of the THT-IV thruster. With the thruster with many considerations, long stable operations were achieved. In all experiments at 200-400 V with 1.5-3 mg/s, the thrust and the specific impulse ranged from 15 to 70 mN and from 1100 to 2300 see, respectively, in a low electric power range of 300~1300 W. The thrust efficiency reached 55 %. Hence, a large map of the thruster performance was successfully made. The thermal characteristics were also examined with data of both measured and calculated temperatures in the thruster body. Thermally safe conditions were achieved with all input powers.

• 한국통신학회논문지
• /
• 제36권4C호
• /
• pp.226-231
• /
• 2011

본 논문은 기존 어류도감을 개선하기 위해 기존 어류도감에 IT 기술들이 적용된 전자어류도감의 개념을 도입하고 이를 위한 영상검색 알고리즘을 제안한다. 영상검색은 전자어류도감의 핵심이고 기존 어류도감을 압도하게 하는 기술이다. 어류는 동종일지라도 형태, 컬러, 질감에서 다른 특징들을 갖고, 심지어 동일 어류도 촬영 시의 자세나 주변 환경에 의해 다른 특징을 갖기 때문에 형태, 컬러, 질감의 단순한 특징을 이용하는 기존 영상검색은 전자어류도감에 적합하지 못하다. 제안된 영상검색은 어류의 머리, 몸통, 꼬리에서 추출된 상세 특징들을 채택하고, 특징들에는 그들의 불변성에 따라 가중치가 다르게 주어진다. 시뮬레이션 결과들은 제안된 알고리즘이 기존 알고리즘을 훨씬 능가하는 것을 보여준다.

• 대한예방한의학회지
• /
• 제14권3호
• /
• pp.77-92
• /
• 2010

Objectives : There has been little known about the Tibetan medicine in the society for Korean medicine. The aim of this study is to review the system of Tibetan medicine and compare with Korean medicine. Methods : The authors investigated several literatures that mentioned Tibetan medicine and organized in physiology, pathology, diagnostics, and treatment. And then, we interpreted the characteristics of Tibetan medicine as well as compared Tibetan medicine with Korean medicine. After that, we analyzed the commons and the differences, and also found out the meaning of Tibetan medicine. Results : The theory of Tibetan medicine is basically constituted of three elements of Lung, Tripa, and Peken in every parts of physiology, pathology, diagnostics, and treatment. Many organs of human body are compared to the fabrications of building. There is a detail explanation about the process of the development of fetus in Tibetan medicine. Tibetan medicine uses taking pulse in wrist, analysis of urine, watching of tongue, sperm, and menstruation, and etc. for diagnosis. In Tibetan medicine, regimen is prior to other treatments such as surgical treatment and medications. Conclusions : There is the oriental thought of '3' in Tibetan medicine, and esoteric buddhism is solved in Tibetan medicine. The anatomy and the diagnostics using urine, sperm, and menstruation have especially been developed in Tibetan medicine. Tibetan medicine emphasizes the feature of preventive medicine.