• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.417-420
• /
• 2001

In this paper, a transceiver using waveguide modules for 60 GHz band wireless LAN is implemented and analyzed. The characteristics of millimeter-wave transmitter are 0 dbm output power, 10.5 dB gain and 38 dBc spurious emition. The receiver's are 3.16 dB noise figure, 8.8 dB gain, -86dBm sensitivity. Maximum communication distance is more than loom. Intermediate frequency comply with IEEE 802.11b. The transfer of multimedia files is performed. The transceiver's data rate can vary with intermediate frequency bandwidth and the transceiver is designed more than 200 Mbps.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.60-63
• /
• 2003

This paper describes the design and the simulation of a V-band single pole double throw (SPDT) FET switch fur millimeter-wave applications using drain impedance transformation network with CPW transmission line. The designed switch has about 10% bandwidth at 60GHz. Insertion loss is better than 3dB fur the ON state and Isolation is larger than 30dB fer the OFF state. The maximum isolation is 43.4dB at 60GHz with input power of 10dBm. The yield analysis is done considering the effects of pHEMT variations.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권12호
• /
• pp.1728-1735
• /
• 2008

The present study was conducted with four ruminally canulated Holstein cows to observe the effects of monensin or fish oil on diet fermentation and production of conjugated linoleic acids (CLAs) in the rumen when fed diets supplemented with soybean oil and sodium bicarbonate. Cows of the control treatment were fed a basal diet (CON) consisting of 60% commercial concentrate and 40% chopped rye grass hay. Cows of other treatments were fed the same diet as CON, but the concentrate was supplemented with 7% of soybean oil and 0.5% of sodium bicarbonate (SO-B), SO-B supplemented with monensin (30 ppm, SO-BM) or concentrate supplemented with 6.3% of soybean oil, 0.5% of sodium-bicarbonate, 30 ppm of monensin and 0.7% of fish oil (SO-BMF). Dry matter (DM) intake of the cows was significantly (p<0.011) reduced by feeding the SO-BMF diet compared to the other diets which did not differ in DM intake. Whole tract digestibility of major dietary components was significantly (p<0.004-0.027) higher for SO-BMF than the other supplement-containing diets. Dietary supplements did not clearly affect rumen pH and ammonia concentrations compared to the CON diet. Significantly reduced (p<0.05) total VFA concentration was obtained by the addition of fish oil to the diet (SO-BMF) compared to other diets. No differences, however, were obtained in major VFA proportions as well as in total VFA between the supplemented diets. The SO-BM diet increased (p<0.01-0.05) the concentrations of trans-11 $C_{18:1}$ and linoleic acid in rumen fluid. Total CLA concentration was also increased by the feeding of SO-B and SO-BM diets during early fermentation times (up to 3 h) post-feeding. Cis-9, trans-11 CLA concentration in rumen fluid was highest (p<0.05) for SO-B up to 1 h while the highest (p<0.01) value for SO-BM occurred at 3 h post-feeding. An increased trans-10, cis-12 CLA concentration was obtained from the SO-B and SO-BM diets at 1 and 3 h post feeding compared to the other diets. Supplementation of oils with monensin and sodium bicarbonate increased (p<0.05) the proportions of $C_{18:1}$ and CLA in the plasma of cows, but the effect of monensin and/or fish oil was limited to trans-10, cis-12 CLA.

• 정보와 통신
• /
• 제12권1호
• /
• pp.59-69
• /
• 1995

이동통신에 대한 수요가 급증하고 있는 이즈음 Battery의 효율적인 사용이 휴대 전화기에 있어서 중요한 문제점으로 부각되고 있다. 본 논문은 LTI에서 1991년 후반부터 개발을 시작 1992년에 개발완료한 아날로그 방식의 5.8V 휴대전화기용 고주파전력 증폭기에 관한 것으로 이것의 일반적인 설계 방법과, 시험 및 생산 방법을 기술하고자 한다. 이와 같이 설계된 고주파 전력증폭기는 양산성이 있으며, 효율 60% typ. 출력 31.5dBm 이상 그리고 2차 3차, 및 4차 고조파가 모두 30 dBc 미만이며 그 외에 load missmatch, Noise, Spurious 특성이 휴대전화기에 적용하기 알맞게 안전하도록 설계되어 있다. 또한 장착의 효율성을 위해 크기를 최소화하여 1.4cc의 체적을 갖고 있다.

• 한국강구조학회 논문집
• /
• 제8권4호통권29호
• /
• pp.133-133
• /
• 1996

Application of the relationship $da/dN=C({\Delta}K)^{m}$ is effective in the analysis of fatigue crack growth life. The values of material constant C and m have great influences on the predicted fatigue life and the relationship between fatigue crack growth rate(da/dN) and stress intensity factor range(${\Delta}K$) is effective in fatigue crack growth behavior. In this paper, fatigue crack growth behavior of the welded joints in HT60 grade TMCP(Thermo Machanical Control Process) steel have been studied. To evalute the fatigue crack growth rates of HT60 grade TMCP steel, fatigue test was performed by base metal(BM), heat affected zone(HAZ) and weld metal(WM) in TMCP steel at room temperature. We determined the relationship of $da/dN-{\Delta}K$ by correlation between C and m obtained from the Paris-Erdogan power law data supplied HT60 grade TMCP steel. The obtained results from this study indicate that fatigue crack growth rate of TMCP steel is not influenced by softening effect which occurs in the HAZ when high heat input weld is carried out. Softening effects, which affect fatigue properties. are shown that it is not affected to the fatigue growth rates significantly.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1356-1364
• /
• 2014

A new conjugated copolymer, poly{4,8-bis(triisopropylsilylethynyl)benzo[1,2-b:4,5-b']dithiophene-alt-4,7- bis(5-thiophen-2-yl)-5,6-difluoro-2-(heptadecan-9-yl)-2H-benzo[d][1,2,3]triazole} (PTIPSBDT-DFDTBTz), is synthesized by Stille coupling polycondensation. The synthesized polymer has a band gap energy of 1.9 eV, and it absorbs light in the range 300-610 nm. The hole mobility of a solution-processed organic thin-film transistor fabricated using PTIPSBDT-DFDTBTz is $3.8{\times}10^{-3}cm^2V^{-1}s^{-1}$. Bulk heterojunction photovoltaic cells are fabricated, with a conventional device structure of ITO/PEDOT:PSS/polymer:$PC_{71}BM$/Ca/Al ($PC_{71}BM$ = [6,6]-phenyl-$C_{71}$-butyric acid methyl ester); the device shows a power conversion efficiency (PCE) of 2.86% with an open-circuit voltage ($V_{oc}$) of 0.85 V, a short-circuit current density ($J_{sc}$) of 7.60 mA $cm^{-2}$, and a fill factor (FF) of 0.44. Inverted photovoltaic cells with the structure ITO/ethoxylated polyethlyenimine/ polymer:$PC_{71}BM/MoO_3$/Ag are also fabricated; the device exhibits a maximum PCE of 2.92%, with a $V_{oc}$ of 0.89 V, a $J_{sc}$ of 6.81 mA $cm^{-2}$, and an FF of 0.48.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.337.2-337.2
• /
• 2016

역 구조 유기태양전지는 가격이 저렴하고 우수한 경량성, 간단한 제조공정 그리고 휘어짐이 가능한 소자를 제작할 수 있는 것이 큰 장점이다. 또한, 광활성층과 전극 사이에 표면개질 물질을 도입하여 에너지장벽을 줄임으로써 소자 전반적인 전하수송을 증가시킬 수 있게 되었다. 나아가 용액공정과 저온 공정을 통해 유기 광전자소자의 roll-to-roll 대면적화 기술을 기반으로 가격대비 성능을 개선시켰다. 본 연구에서는 CdSe 또는 CdSe@ZnS 양자점을 표면개질 유기물질인 polyethylenimine ethoxylated (PEIE)에 정전기적 인력의 결합을 통한 양자점 단일층을 얻었고 이는 전기수송층, 광흡수층 그리고 표면플라즈몬 공명(Surface plasmon resornace)의 역할을 수행하게 되면서 태양전지 전반적인 성능 향상을 관찰 할 수 있었고 양자점 단일층으로 인해 20%가 증가된 에너지변환효율 얻었다. 또한 단일층으로 형성된 CdSe 또는 CdSe@ZnS 양자점 은 $F{\ddot{o}}rster$ resonance energy transfer (FRET) 메커니즘을 통해 PC60BM과 P3HT의 Photo luminescence 세기를 99% 감쇄시켰고, CdSe 양자점을 유기 광활성층인 PTB7:PC71BM에 적용하여 8.1%의 수치를 나타내었다.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.160-169
• /
• 2012

Flux Cored Arc Welding (FCAW) is a common practice to join thick plates such as the structural members of large scale offshore structures and very large container ships. The objective of this study was to investigate the mechanical properties and variability of the fatigue crack initiation life in the flux cored arc welded API 2W Gr.50 steel joints typically applied to offshore structures with a focus on the effect of the materials in fatigue crack growth life from the notch root of a compact tension specimen. Offshore structural steel (API 2W Gr.50) plates (60-mm thick) were used to fabricate multi-path flux core arc welded butt welded joints to clearly consider fatigue fractures at the weld zone from the notch. Fatigue tests were performed under a constant amplitude cyclic loading of R = 0.4. The mean fatigue crack initiation life of the HAZ specimen was the highest among the base metal (BM), weld metal (WM), and heat affected zone (HAZ). In addition, the coefficient of variation was the highest in the WMl specimen. The variability of the short fatigue crack growth rates from the notch tips in the WM and HAZ specimens was higher than in BM.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.232-238
• /
• 2015

This work describes the development of a D-band (110-170 GHz) signal source based on a SiGe BiCMOS technology. This D-band signal source consists of a V-band (50-75 GHz) oscillator, a V-band amplifier, and a D-band frequency doubler. The V-band signal from the oscillator is amplified for power boost, and then the frequency is doubled for D-band signal generation. The V-band oscillator showed an output power of 2.7 dBm at 67.3 GHz. Including a buffer stage, it had a DC power consumption of 145 mW. The peak gain of the V-band amplifier was 10.9 dB, which was achieved at 64.0 GHz and consumed 110 mW of DC power. The active frequency doubler consumed 60 mW for D-band signal generation. The integrated D-band source exhibited a measured output oscillation frequency of 133.2 GHz with an output power of 3.1 dBm and a phase noise of -107.2 dBc/Hz at 10 MHz offset. The chip size is $900{\times}1,890{\mu}m^2$, including RF and DC pads.

• 한국전자파학회논문지
• /
• 제21권11호
• /
• pp.1318-1323
• /
• 2010

밀리미터파 대역의 부품 수요가 많아질 것으로 예상되어지는 57~63 GHz 대역의 하향 변환 혼합기를 IHP SiGe 0.25 um 공정을 이용하여 설계 및 제작하였다. 혼합기 RF 단에 크기를 줄인 3D 발룬(balun)을 위치하였으며, 혼합기는 두 개의 평형 혼합기로 구성하고 LO 신호의 억압과 출력단의 이득을 위하여 버퍼(buffer) 증폭기를 위치하였다. 측정 결과, 변환 이득 13.8 dB, $P1dB_{in}$ -17 dBm, 전류 소모는 88 mA의 특성을 나타내었다.