• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.339-344
• /
• 2011

In this paper, we proposed an internal multi-band monopole antenna for mobile phone that can be used for smart phones. The proposed antenna has a small volume of $38{\times}8.5{\times}5\;mm^3$, ground size is $100{\times}60\;mm^2$, and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), DCS (Digital Communications System : 1710-1880 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), Bluetooth (2400-2483 MHz), Wibro (2300-2390 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands. The measured peak gains of the implemented antenna are 1.15 dBi at 920 MHz, 3.58 dBi at 1795 MHz, 3.46 dBi at 1810 MHz, 2.91 dBi at 1920 MHz, 5.18 dBi at 2345 MHz, 3.37 dBi at 2442 MHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.63-69
• /
• 2008

Reconfigurable RF one-chip solutions have been researched with the objective of designing for smaller-sized and more economical RF transceiver and it can be applied to a vehicular wireless terminal. The proposed voltage-controlled oscillator satisfies the targeted frequency range ($4.2{\sim}5.4\;GHz$) and the frequency planning which correspond to the standards such as CDMA(IS-95), PCS, GSM850, EGSM, WCDMA, WLAN, Bluetooth, WiBro, S-DMB, DSRC, GPS, and DVB-H/DMB-H/L(L Band). In order to improve phase noise performance, PMOS is adopted in the cross-coupled pair, the tail current source and MOS varactor in this VCO and differential-typed switching is proposed in capacitor array. Based on the measurement results, a total power dissipation is $5.3{\sim}6.0\;mW$ at 1.8 V power supply voltage. The oscillator is tuned from 4.05 to 5.62 GHz; The tuning range is 33%. The phase noise is -117.16 dBc/Hz at 1 MHz offset frequency and the FOM (Figure Of Merit) is $-180.84{\sim}-180.5$.

• Journal of Korean Society of societal Security
• /
• v.1 no.4
• /
• pp.73-81
• /
• 2008

Electromagnetic induction surveys are one of the useful methods to detect the location and buried depth of underground utilities by measuring horizontal and vertical magnetic fields. It can effectively detects single buried utility with the accuracy of within 20 cm. However when another utility is buried near to target one, the accuracy of utility location considerably decreases due to the distortion of magnetic fields caused from adjacent utility. This study shows the ways to verify the location and buried depth of target utility when magnetic fields does not show symmetric distribution due to adjacent another utility. Using Bluetooth wireless communication tools, we developed the way to records measured magnetic fields to handheld PDA. We investigated the criteria for minimum distance of two adjacent utilities to separate the individual responses through field model test.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.294-301
• /
• 2020

Man-In-Simulant Test(MIST) provides a test method to evaluate chemical protective equipments such as protective garments, gloves, footwear and gas mask. The MIST chamber is built to control concentration of chemical vapor that has a activity space for two persons. Non-toxic methyl-salicylate(MeS) is used to simulate chemical agent vapor. We carried out to measure inward leakage MeS vapors by using passive adsorbent dosimeter(PAD) which are placed on the skin at specific locations of the body while man is activity according to the standard procedure in MIST chamber. But more time is required for PADs and there is concern of contamination in PADs by recovering after experiment. Therefore detector for measuring in real time is necessary. In order to analyze in real time the contamination of the personal protective equipment inside the chemical environment, we have developed a wireless real-time gas detector. The detector consists of 8 gas-sensors and 1 control-board. The control-board includes a CPU for processing a signal, a power supply unit for biasing the sensor and Bluetooth-chipset for transmission of signals to external PC. All signals from gas-sensors are converted into digital signals simultaneously in the control-board. These digital signals are stored in external PC via Bluetooth wireless communication. The experiment is performed by using protective equipment worn on manikin. The detector is mounted inside protective equipment which is capable of providing a real-time monitoring inward leakage MeS vapor. Developed detector is demonstrated the feasibility as real-time detector for MIST.

• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.245-252
• /
• 2018

A method of transmitting an alert signal in case of man-overboard (MOB) systems in a small fishing vessel navigating within coastal area is being operated as VHF-DSC equipment via a distress alert button and V-P ass Equipment via alert button or beacon separation. However, a small fishing vessel with a couple of crews on board is an inappropriate way to alert a man-overboard condition. However, internationally, MOB equipment using VHF-DSC, AIS, and Bluetooth technologies is used to transmit alert signals directly to the mother ship and other radio stations. In order to analyze the performance and technology of the MOB equipment operating in foreign countries, it was confirmed that the alarm signal can be received within a maximum of one nautical mile when the MOB device is on the water surface. An MOB device that meets domestic conditions needs to send an alarm signal to a station within the VHF communication range. However, in order to reduce the false alert signal, it is most appropriate to operate the VHF-DSC radio equipment installed on the ship remotely. Analysis of various technologies connecting the MOB and the VHF-DSC revealed that the Bluetooth system has advantages such as device miniaturization. When an emergency signal is transmitted from the MOB device, it can be received by a dedicated receiver and recognized through an external input terminal of the VHF-DSC equipment generating its own alarm. If the emergency situation cannot be processed at the mother ship, a distress alert is sent to all radio stations via VHF-DSC for response under emergencies faced by small fishing vessels.

• Journal of information and communication convergence engineering
• /
• v.1 no.4
• /
• pp.183-188
• /
• 2003

The $4^{th}$ generation mobile communications, through several radio access networks such as WLAN, Bluetooth, UMTS, GPRS, CDMA 1X, and IMT-2000 in the same area offering different type of coverage, will support interactive multimedia services in additions to wider bandwidths, higher bit rates, and service portability. Regardless of various radio access networks, they will also support robust security mechanisms, as well as seamless mobility and common authentication. In this paper, we give an overview of WLAN security and examine its security problems. We also explain the enhanced security schemes, such as port-based authentication, EAP, and IEEE 802.1X. For secure wireless communications, several possible security solutions are offered and evaluated in various respects to improve WLAN security. This paper will make a contribution to provide more secure wireless communications to cellular operators embracing WLAN technology as a means to generate new revenues based on data services.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.534-537
• /
• 2013

A compact monopole antenna excited by a conductor-backed coplanar waveguide (CBCPW) is developed for wireless USB dongle applications. The proposed antenna has a compact dimension of $14mm{\times}47.4mm{\times}3.5mm$, which is suitable for a USB dongle housing. A slotted elliptical patch and a CBCPW with vertical vias are employed to achieve a further size reduction and an improved impedance bandwidth. The measurement result demonstrates that the fabricated antenna resonates from 2.25 GHz to 10.9 GHz, which covers all of the important wireless communication bands, including WiBro (2.3 GHz to 2.4 GHz), Bluetooth (2.4 GHz to 2.484 GHz), WiMAX (2.5 GHz to 2.7 GHz and 3.4 GHz to 3.6 GHz), satellite DMB (2.605 GHz to 2.655 GHz), 802.11b/g/a WLAN (2.4 GHz to 2.485 GHz and 5.15 GHz to 5.825 GHz), and ultra-wideband (3.1 GHz to 10.6 GHz) services. The radiation characteristics of the proposed antenna when attached to a laptop are tested to investigate the influence of the keypad and the LCD panel of the laptop.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.54-57
• /
• 2004

블루투스는 작은 크기와 저렴한 가격, 표준화된 프로토콜, 저전력 소모 등의 잇점으로 인해 로봇에 응용하기 적합한 무선 기술로 주목받고 있다. 그러나 단일 통신망을 구성하기 위해서는 1：7의 Master/slave 구조와 무선 통신거리 등의 제약사항이 있다. 블루투스를 로봇 시스템에 적용하기 위해서는 주위 환경에 따른 자기 조직화를 통해서 이러한 단점을 보완하고 주위 환경의 변화에 적절하게 대응을 할 수 있도록 하는 네트워크 구성 시스템이 필요하다. 자기 조직화를 하기 위해서는 Discovery, Organization, Maintenance, Reorganization의 크게 4단계의 과정을 거친다. 본 논문에서는 분산 로봇 시스템을 위해 트리구조를 이용한 자기 조직화 가능한 블루투스 네트워크를 구현하고 그 성능을 평가한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.113-118
• /
• 2006

Recently, wireless LANs are often applied in home or office because of its various of convenience. Frequency rage of wireless LANs specified by IEEE 802.11b is at 2.4 GHz. The bluetooth, the microwave oven, and the PDA(Personal Digital Assistants) uses ,however, the same frequency band. So problems will be produced in these environments, such as multi-pass interference and system-to-system interference. These problems can be eliminated by using EM wave absorber. In this paper, we designed and fabricated EM wave absorber using Sendust, $Al(OH)_3$, and CPE. The double-layered EM wave absorber with thickness of 1.5 mm has absorption ability more than 10 dB at 2.4 GHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.1005-1008
• /
• 2006

In this paper, we provide data of wireless environment in indoor for Bluetooth and wireless LAN systems. To accurately measure transmission characteristic for influence of the indoor wall, we used radiation measurement system with antennas. And various structure and material of the indoor wall are measured. Results of the measurement show that the attenuation of power is about $1\sim3dB$ for cement wall(25cm). In the case of cement wall with steel frame, the attenuation of power was increased using horizontal polarization but was not affect using vertical polarization.