• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.29-36
• /
• 2004

유비쿼터스 컴퓨팅 시대가 매우 빠르게 도래하면서 가정이나 회사의 정보 가전기기들이 초고속, 대용량을 전송하는 고속의 디지털 가전기기들로 바뀌어 가고 있으며 이들을 하나의 네트워크로 구성하고자 하는 요구가 증가하고 있다. IEEE 802.11과 IEEE 802.15.3a Task Group에서는 대량의 정보를 고속으로 통신하는 기술의 표준화를 위해 연구하고 있으며, 간단한 시스템을 이용하여 저속의 통신을 저렴한 가격으로 이루려는 또 하나의 주류인 ZigBee (IEEE802.15.4), Bluetooth (IEEE802.15.1) 시스템이 개발되고 있다. (중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1027-1029
• /
• 2012

최근 IEEE 802.11(Wi-Fi), IEEE 802.15.1(Bluetooth), IEEE 802.15.4(ZigBee) 등 2.4GHz 대역의 비허가 주파수 대역의 사용이 늘어나고 있다. 통신 방식은 다르지만 사용 주파수 대역이 동일하다는 관점에서 간섭의 영향을 피할 수 없기 때문에 각 기술간 간섭의 영향을 완화하고 간섭 상황에서 각 기술의 성능을 향상하기 위해 각 기술에 대한 상호 작용하는 것에 대한 연구가 진행 되어야 한다. 본 논문에서는 IEEE 802.11b/g, IEEE 802.15.1, IEEE 802.15.4가 2.4GHz 대역에서 상호간에 미치는 영향을 분석하기 위해 PER(Packet Error Rate) 분석을 수행하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.67-74
• /
• 2009

In this paper, the multi-band antenna with CPWG(Coplanar Waveguide with Ground) feed for telematics mobile devices is designed and fabricated. The proposed antenna improves the return loss characteristic by using open-circuited stub matching and rectangular slot in the radiation patch. In addition, CPWG structure makes up for the drawback of the CPW which is variation of impedance matching according to the gap variation of the feed line and the ground. The fabricated antenna has 1.4GHz ($1.43GHz{\sim}2.83GHz$, 65%) band width on -10dB (VSWR<2) and the maximum gains are 0.8dBi, 1.34dBi, 2.41dBi, 2.53dBi, 2.6dBi and 1.51dBi on each resonant frequency that are GPS $(1.564GHz{\sim}1.585GHz)$, PCS/DCS $(1.710GHz{\sim}1.984GHz)$, WCDMA $(2.170GHz{\sim}2300GHz)$, Bluetooth/Wi-Fi/WLAN $(2.4GHz{\sim}2.483GHz)$, WiBro $(2.3GHz{\sim}2.4GHz)$, SDMB $(2.605GHz{\sim}2.655GHz)$. It also has an omni-directional radiation pattern of H-Plane.

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.51-53
• /
• 2013

A MIMO antenna using the resonance of ground planes is proposed for 4G mobile application. A resonant mode is generated when the double ground planes (upper and lower) in the mobile terminal are excited as the radiator. By combining the resonant modes contributed from both the antenna element and the ground planes, the proposed MIMO antenna realizes a wideband property over LTE band 13. In addition, an inductive coil is employed to reduce the antenna volume. These approaches not only simplify antenna design but also effectively improve bandwidth and efficiency. The proposed MIMO antenna has an excellent ECC value of below 0.1 because of the nearly orthogonal radiation patterns of the two radiators. Moreover, an additional antenna is adopted to cover WiMAX, WLAN, and Bluetooth services simultaneously in frequency range from 2 GHz to 2.7 GHz.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.154-161
• /
• 2018

As the number of smartphone users increases, research on indoor location recognition service is necessary. Access to indoor locations is predominantly WiFi, Bluetooth, etc., but in most quarters, WiFi is equipped with WiFi functionality, which uses WiFi features to provide WiFi functionality. The study uses the random forest algorithm, which employs the fingerprint index of the acquired WiFi and the use of the multI-value classification method, which employs the receiver signal strength of the acquired WiFi. As the data of the fingerprint, a total of 4 radio maps using the Mac address together with the received signal strength were used. The experiment was conducted in a limited indoor space and compared to an indoor location recognition system using an existing random forest, similar to the method proposed in this study for experimental analysis. Experiments have shown that the system's positioning accuracy as suggested by this study is approximately 5.8 % higher than that of a conventional indoor location recognition system using a random forest, and that its location recognition speed is consistent and faster than that of a study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4125-4130
• /
• 2015

This paper presents the communication performance for the radiation pattern reconfigurable antenna in the wearable device measuring bio signal (temperature, blood pressure, pulse etc.) of human body. The operational frequency is 2.4 - 2.5 GHz, which covers Bluetooth communication bandwidth. The maximum gain of the antennas is 1.96 dBi. The proposed antenna is efficiently transmitting and receiving signal by generating two opposite beam directions using two RF switches (PIN diode). Also, we investigated how radiation pattern changes according to three angles ($30^{\circ}$, $90^{\circ}$, $150^{\circ}$) of Top Loading. In this paper, we measured and compared the SNR (Signal-to-Noise Ratio) and BER (Bit Error Rate) performances of the proposed antennas in the condition between an ideal environment of anechoic chamber and smart house existing practical electromagnetic interferences (Universal Software Radio Peripheral, USRP). Throughout the comparing the results of the measurement of two cases, we found that the SNR is degraded over 5dB in average and BER is increased over ten times in maximum, therefore, it is confirmed that the error rate of receiving signal is increased. The measured results of SNR and BER value in this paper able to expect the performance degrading by the interference from the electromagnetic devices.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1724-1726
• /
• 2008

본 연구는 릴레이의 코일 접점 신호의 검출을 송신기에서 코일의 데이터를 검출하고 4-20mA데이터를 1/5,000까지의 분해능으로 환산하되 블루투스를 이용한 무선통신으로 전송할 수 있도록 하여 송신기의 각 코일에서 검출된 데이터 값을 인디케이터에 전송하고 다시 릴레이 코일 신호로 만들어 표시하고 제어하도록 한 것이다. 데이터의 전송은 1Port 에서 10 Port까지 릴레이 코일 및 4-20mA 물리량을 이용하여 검출대상의 접점 리액턴스를 각각 측정하여 블루투스를 이용한 무선통신 데이터 값을 송신하는 코일의 접점 송신수단과 상기 릴레이 접점 송신수단으로부터 전송된 데이터 값을 블루투스를 이용하여 무선통신으로 수신한 후, 상기 릴레이 접점에서 전송된 각각의 데이터 값과 전체 물리량으로 연산 처리된 데이터 값을 디스플레이 하고, 데이터의 디스플레이된 값을 통해 리액턴스 출력, 경보음출력, RS232, 4-20mA 출력이 발생되게 하는 인디케이터로 구성하는 블루투스를 이용한 10 Port 코일 리프트 제어 콘트롤러이다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2022

In this study, inaccurate RSSI values of beacons are corrected using extended Kalman filter. For the experiment, the beacon was manufactured using Arduino Uno board and HM-10 Bluetooth module. RSSI values according to the distance between beacon and the viewer were measured at intervals of 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m, 4.5m, and 5m. To remove the irregular signal pattern of the beacon, the extended Kalman filter was applied to obtain the average and standard deviation of the actual distance and the measured distance, and it was confirmed that more than 76.6% of the irregular signal pattern was removed after using the extended Kalman filter.In addition, through the smartphone app, it was confirmed that the distance accuracy between the beacon and the measurer was less than the actual distance and the measured distance within 2m, and the standard deviation was small.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.60-67
• /
• 2008

A low-power 2.4GHz fractional-N frequency synthesizer has been designed for 2.4GHz ISM band applications such as Bluetooth, Zigbee, and WLAN. To achieve low-power characteristic, the design has been focused on the power optimization of power-hungry blocks such as VCO, prescaler, and ${\Sigma}-{\Delta}$ modulator. An NP-core type VCO is adopted to optimize both phase noise and power consumption. Dynamic D-F/Fs with no static DC current are employed in designing the low-power prescaler circuit. The ${\Sigma}-{\Delta}$ modulator is designed using a modulus mapping circuit for reducing hardware complexity and power consumption. The designed frequency synthesizer which was fabricated using a $0.18{\mu}m$ CMOS process consumes 7.9mA from a single 1.8V supply voltage. The experimental results show that a phase noise of -118dBc/Hz at 1MHz offset, the reference spur of -70dBc at 25MHz offset, and the channel switching time of $15{\mu}s$ over 25MHz transition have been achieved. The designed chip occupies an area of $1.16mm^2$ including pads where the core area is only $0.64mm^2$.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1638-1639
• /
• 2011

본 논문에서는 초소형 무선 USB 동글 장치를 위한 광대역 접힌(folded) 모노폴 안테나를 제안하였다. 제안된 안테나는 CPW 급전으로부터 삼지창 형상의 선로를 적용하여 광대역 특성을 구현하였다. 최종 설계된 안테나의 크기는 $16{\times}44.8{\times}3.5\;mm^3$이며, low-profile의 무선 USB 동글용 안테나에 적합하다. 제안된 안테나는 $S_{11}$ < -10 dB 기준으로 2.28~10.8 GHz의 공진 주파수 대역을 가지므로 WiBro (2.3~2.4 GHz), Bluetooth (2.4~2.484 GHz), WiMAX (2.5~2.7 GHz, 3.4~3.6 GHz), satellite DMB (2.605~2.655 GHz), 802.11b/g/a WLAN (2.4~2.485 GHz, 5.15~5.825 GHz), UWB(3.1~10.6 GHz)의 무선 대역을 지원 할 수 있다. 측정된 평균 이득의 범위는 -3.41 dBi 에서 -0.84 dBi 이다.