• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.66-72
• /
• 2016

An LED lighting control system was developed to combine information technology and LED lights for efficient management and energy savings. The system can monitor and control the status of an LED luminaire using Bluetooth wireless communication, sensor technology, and smart phones. An LED lighting control circuit was designed using a temperature sensor, illumination sensor, and Bluetooth module with a fuzzy constant-current control circuit. We extended the lifetime and prevented damage to the LED by optimizing the supply current of the LED luminaire based on the heat-generation temperature of $70^{\circ}C$ of an LED heat sink. We also automatically adjusted the ON/OFF time depending on the ambient illumination of the LED luminaire. By allowing easy control of the LED luminaires on a smartphone, we improved the efficiency and achieved energy savings. The control system was validated through experiments for normal operation.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.435-443
• /
• 2020

We analyzed whether the use of the Bluetooth salinity meter could affect the proper level of salinity in childcare centers. This study was conducted on childcare centers that wish to participate in the sodium reduction project (Bluetooth salinity meter using group, BG) and those that did not participate (Bluetooth salinity meter not using group, NG) among childcare centers registered with Center for Children's Foodservice Management in Anyang from January to December 2019. As a result of comparing the salinity and sodium contents of the soup according to whether or not a Bluetooth salinity meter was used, the salinity and sodium contents of BG was significantly lower than that of NG (p < 0.0001). Salinity and sodium contents in soups tended to decrease as the number of use of the Bluetooth salinity meter increased (p = 0.020). In conclusion, Bluetooth salinity meter can be used as a means to induce voluntary salinity control by cookers regarding sodium reduction education at childcare centers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.6
• /
• pp.1371-1378
• /
• 2018

Bluetooth is the key technology in the wireless connection of many Internet of Things (IoT) devices, especially focused on smartphones today. In addition, Bluetooth communication between the IoT device and the user is mainly performed via Bluetooth Low Energy (BLE), but as the Bluetooth technology gradually develops, the security vulnerability of the existing BLE is more prominent. Research on Bluetooth accessibility has been conducted steadily so far, but there is lack of research for data protection in Bluetooth communication. Therefore, in this paper, when sending and receiving data in BLE communication between IoT and users, we propose effective methods for communicating with each other through the Format Preserving Encryption Algorithm (FEA), not the plain text, and measures performance of FEA which is optimized in Arduino and PC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2408-2412
• /
• 2003

Recently the idea of a home automation has been an important issue in many publications and home appliances companies. Home automation is a house or living environment that contains the technology to allow devices and systems to be controlled automatically. Remote and local control are useful to keep home comfortable and to support the elderly and the disabled people. In this paper, we discuss possible developments of Bluetooth wireless technologies and describe the hardware for devices and software for the considerations of a home automation system. Finally, we have validated the testbed by simulating in the Bluetooth home network.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.245-250
• /
• 2008

Recently, mobile devices have supported wireless LAN as well as bluetooth, where the services such as heterogeneous network access and seamless mobility connection are important. Even though the mobility and physical network might be varied, an efficient communication mechanism for the network access and a robust mobility management of mobile devices are needed. In this paper, we design and implement a Bluetooth system with mobile LAN access capability. The proposed system has the following features; 1) IP connection is enabled by BENP in the link layer, 2) The networks devices of heterogeneous mobile devices are integrated into a single virtual network interface, 3) IP mobility between the bluetooth and wireless LAN is supported by mobile IP. The experimented results show that the packet loss and delay time during the handover duration is reduced by predicting the handover among different networks followed by the setup of any required parameters in advance.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.59-64
• /
• 2001

This paper analyzes the performance of the several types of ACL(Asynchronous ConnectionLess) packets used in Bluetooth according to a BER(Bit Error Rate) and a packet length and proposes an optimal packet type and an optimal size of the packet being able to be used under the given BER. This paper proposes how to obtain the optimal packet type and the optimal size of the packet maximizing the performance measure under the given BER. In addition, this paper shows that the optimal type and size of the packet maximizing the throughput are different from those maximizing the mean transmission time. This occurs because the Bluetooth uses not only one type of packet but also various types of packets.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.41-46
• /
• 2003

Because the quality of a radio link in real environment is generally varied with time, there is a difference between the delay in the real environment and one obtained from the analytic model where a time-varying link model is not used as a link model for a Bluetooth. This paper analyzes the transmission delay of a message in the time-varying radio link model for the Bluetooth. The time-varying radio link is modeled with a two-state Markov model. The mean transmission delay of the message is analytically obtained in terms of the arrival rate of the message, the state transition probability in the Markov model, and the packet error rate.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.1073-1074
• /
• 2017

In this paper, we present a customer preference analysis system using the Bluetooth Low Energy technology. Compared to Classic Bluetooth, Bluetooth Low Energy provides considerably reduced power consumption, and cost, as well as some unique characteristics while maintaining a similar communication range. The customer preference analysis system collects nearby Bluetooth Low Energy devices using an Android mobile device via Bluetooth Low Energy. In addition, the system is capable of suggesting, and advertising products that are related to these Bluetooth Low Energy devices based on the name of their manufacturer. This feature aims to attract potential customers to purchase these products.

• TTA Journal
• /
• s.75
• /
• pp.43-52
• /
• 2001

블루투스(bluetooth)란 핸드폰, PDA, 노트북과 같은 포터블한 장치들간의 양방향 근거리 통신을 복잡한 전선없이도 저가격으로 구현하기 위한 표준, 근거리무선통신 기술, 제품을 총칭하여 일컫는다. 본 고에서는 블루투스 개요, 제품 개발 동향, 국내외 시장, 국내외 표준화, 제품의 시험인증 현황을 조사분석하고자 한다.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.126-131
• /
• 2017

This paper designs a smart safety measurement system with Bluetooth beacon sensor nodes that can provide risk detection and evacuation/countermeasure services. The Bluetooth beacon sensor nodes is easily able to be attached to old building wall or construction or civil structure with potential danger. The proposed smart safety measurement system transmits various sensor data such as acceleration, gyroscope, geomagnetic, pressure, altitude, temperature, humidity at the spot where Bluetooth beacon sensor nodes are installed, and we can use them for risk perception, prediction, and warning services. To verify the effectiveness of the proposed system, we performed filed tests which showed that measured displacement values of precast retaining walls were within the permitted displacement value of 38.5 mm.