• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.298-306
• /
• 2016

With the advent of Internet of Things (IoT) technology that allows the communications between things and devices over the Internet, a lot of researches on the IoT services, such as smart home or healthcare, have been progressed. In the existing machine-to-machine (M2M) communications, however, since the underlying link-layer technologies, such as Bluetooth or ZigBee, do not use the Internet Protocol (IP) communication, those technologies are not suitable to provide the IoT services. Accordingly, this paper discusses how to provide the Internet services in the M2M communication, and propose an implementation of the Constrained Application Protocol (CoAP) over 6LoWPAN for providing IoT services in the BLE networks. Based on the implementation, we compared the performance between HTTP and CoAP for IoT communications. From the experimental results, we can see that the CoAP protocol gives better performance than the HTTP protocol with two times higher throughput, 21% faster transmission time, and 22% smaller amount of generated packets.

• Journal of Biomedical Engineering Research
• /
• v.42 no.6
• /
• pp.259-267
• /
• 2021

Recently, the market for personal health care and medical devices based on Bluetooth Low Energy(BLE) has grown rapidly. BLE is being used in various medical data communication devices based on low power consumption and universal compatibility. However, since data errors occurring in the transmission of medical data can lead to medical accidents, it is necessary to analyze the causes of errors and study methods to reduce data error. In this paper, the minimum communication speed to be used in medical devices was set to at least 800 byte/sec based on the wireless electrocardiography regulations of the Ministry of Food and Drug Safety. And the data loss rate was tested when data was transmitted at a speed higher than 800 byte/sec. The factors that cause communication data error were classified, and the relationship between each factor and the data error rate was analyzed through experiments. When there were two or more activated peripherals connected to the central, data error occurred due to channel hopping and bottleneck, and the data error rate increased in proportion to the communication distance and the number of activated peripherals. Through this experiment, when the BLE is used in a medical device that intermittently transmits biosignal data, the risk of a medical accident is predicted to be low if the number of peripherals is 3 or less. But, it was determined that BLE would not be suitable for the development of a biosignal measuring device that must be continuously transmitted in real time, such as an electrocardiogram.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.345-347
• /
• 2016

Recently location based services is being expanded into the indoor service that can not access to the outdoor location informations, such as GPS. Thus, the research and development of an indoor positioning system with BLE(Bluetooth Low Energy) iBeacon technology has expanded. However, RSSI (Received Signal Strength Indicator) that is used as the distance information between the terminal and for positioning iBeacon signal has a problem in that distortion occurs, information such as the signal attenuation and the delay due to the characteristics of radio waves. In this paper, we propose a reliable method of verifying iBeacon signal with the signal distortion problems for reliable indoor positioning systems.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.4
• /
• pp.405-411
• /
• 2020

In this paper, we designed the COS MEMS system for sensing the falling detection and explosive noise of fuse link in COS (Cut Out Switch) installing on the power distribution. This system analyzed the failure characteristics and an instantaneous breakdown of power distribution. Therefore, our system strengths the industrial competence and guaranties the stable power supply. In this paper, we applied BLE (Bluetooth Low Energy) technology which is suitable protocol for low data rate, low power consumption and low-cost sensor applications. We experimented with LSM6DSOX which is system-in-module featuring 3 axis digital accelerometer and gyroscope boosting in high-performance mode and enabling always-on low-power features for an optimal motion for the COS fuse holder. Also, we used the MP34DT05-A for gathering an ultra-compact, low power, omnidirectional, digital MEMS microphone built with a capacitive sensing element and an IC interface. The proposed COS MEMS system is developed based on nRF52 SoC (System on Chip), and contained a 3-axis digital accelerometer, a digital microphone, and a SD card. In this paper of experiment steps, we analyzed the performance of COS MEMS system with gathering the accelerometer raw data and the PDM (Pulse Data Modulation) data of MEMS microphone for broadcasting the failure of COS status.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.326-327
• /
• 2016

A study on Ontology-based indoor positioning techniques using BLE Beacon. Recently BLE beacon has been widely used as a technique for measuring the indoor location. But it requires a filtering technique for the measurement of the correct position, and uses the most fixed beacon. It is not accurate that calculates the position information through the identification of the beacon signal. Therefore, filtering is important. So it takes a lot of time, position measurement and filtering. Thus, we is to measure the exact position at the indoor using a mobile beacon. The measured beacon signal is composed of an ontology for reuse in the same pattern. RSSI is measured the receiver is the distance of the beacon. And this value configure the location ontology to be normalized by the relationship analysis between the values. The ontology is a method for calculating the position information of the moving beacon. It may be detected fast and accurate indoor position information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.1005-1012
• /
• 2016

LED beacons operated on an isolated marine area are mostly employing the solar power supply system, and this system is well known for increasing the cost of management and maintenance. Recently, a number of researches and demonstrations on self-contained LED beacon is actively conducted to solve this issue. In this work, we propose an self-contained LED beacon with Bluetooth Low Energy function for an effective management of LED beacon. Firstly, control program structure is designed by expanding the status protocol of self-contained LED beacon, and then it is implemented into the form which administrator can easily understand. The control system visualizes the status and control data of self-contained LED beacon, and this enables the rapid decision-making of administrator. Also, minimizing electricity consumption of the beacon, it can transfer and update the status or light information of self-contained LED beacons with smart phone.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1368-1373
• /
• 2015

Recently, There is increasing interest in the IoT(Internet of Thing) as intelligent information service that enables communication between people and things based on internet. In particular the demand for indoor location-based services with the development of smart devices is rapidly increasing. Using the RSSI signal that is provide to the BLE(Bluetooth Low Energy) for Indoor location information measurement calculates distance information between beacon and mobile terminal. However, simply using the RSSI signal to the distance measurement has a difficult to get the indoor location information due to the influence of the signal interference and the weather. In this paper, by performing an operation for obtaining a reliable distance information from the signal information of iBeacon we propose a system for providing reliable indoor location.

• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.71-78
• /
• 2021

There are regularly planned overhaul periods in thermal power plants, which involve the maintenance of the boiler of the power plants. However, thermal power plants workers are always exposed to risk during overhaul periods owing to the narrow space and significant dust inside the boiler. Therefore, it is essential to develop a safety monitoring system that is suitable for operating in this type of environment. In this study, we developed not only a worker three-dimensional (3D)-location monitoring system that can monitor and record the entry/exit of workers, their 3D-location, and fall accidents but also a method to secure the working environment and operation efficiency. This system comprises of a worker tag, which was equipped with an inertial measurement unit, a barometric pressure sensor, and a Bluetooth low energy (BLE), and the tags were given to each worker. In addition, the location of workers inside the boiler was measured using a pedestrian dead reckoning (PDR) method and BLE beacons. The location data of the workers tag were transmitted to the integrated database (DB) server through a gateway, and to the administrator monitoring system. The performance of the system was demonstrated inside an actual thermal power plant boiler, and the accuracy and reliability of the system were verified through a number of repeated tests. These results provide insights on designing a new system for monitoring enclosed spaces.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.482-483
• /
• 2018

스마트폰을 중심으로 한 다양한 형태의 모바일 기기의 등장과 이를 기반으로 하는 사용자 중심의 위치 정보 서비스 기술은 지속적으로 발전하고 있으며, 관련된 모바일 서비스 시장의 규모 또한 매우 큰 폭으로 성장하고 있다. 특히, GPS(Global Positioning System)를 기반으로 하는 음식점 검색과 배달 음식 주문 모바일 어플리케이션은 많은 사용자를 중심으로 보편화되고 있다. 본 논문에서는 이와 같은 음식 주문과 관련하여 BLE(Bluetooth Low Energy Beacon)비콘을 사용한 실내 사용자 위치 정보 기반의 외식 매장용 모바일 서비스를 제안한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.69-76
• /
• 2015

Bluetooth 4.0 is a low energy near communication technology. It is a suitable for Internet of Things(IoT), that is, all devices using small electric power consume are connected because power consumption is more lowing and brodening for application scope against bluetooh 3.0. Therefore in this paper, a present situation of beacon technologies are investigated and a design principle of restaurant advertisement and order system using beacon technology are presented. A beacon which is tranceiver based on bluetooth 4.0 technology and bluetooth 4.0 receiver device design is showed and design method of smart-phone interlocking these devices is presented. Also it shows that this design method is very useful for the Restaurant Advertisement & Order Commercial System production.