• The Journal of the Korea Contents Association
• /
• v.8 no.12
• /
• pp.10-19
• /
• 2008

In this paper, we propose an automated silhouette extraction method that can effectively extract inner-patterns and silhouettes from 3D scan data of cultural asset. First of all, after creating the edge list of 3D vector data, we decide contour edge and crease edge according to viewpoint. In the next step, after extracting surface silhouette by investigating the vector variation of adjacent faces in crease edge, we finally extract the contour silhouette and surface silhouette for generating the blueprint of cultural asset. To evaluate the performance of the proposed silhouette extraction method, we performed experiments of silhouette extraction using a traditional tile model, a car model and a stone monument model. Comparing with the conventional threshold-based silhouette extraction method, the proposed method extracted more distinct and clear surface silhouettes and inner-patterns by effectively removing meaningless edges, such as noise.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.292-296
• /
• 2002

This study has been accomplished as a experimental study for field application of 3D Perspective Image Map creation using Digital Topographical Map and based on the Ortho-Projection Image which is generated from Satellite Overlay Images and the precise Relative Coordinates of longitude, latitude and altitude which is corrected by GCP(Ground Control Point). AS to Contour Lines Map which is created by Coordinate conversion of 1:5,000 Topographical Map, we firstly made Satellite Image Map to substitute for Digital Topographical Map through overlapping the original images on top of each Ortho-Projection Image created and checking the accuracy. In addition to 3D Image Map creation for 3D Terrain analysis of a target district, Slope Gradient Analysis, Aspect Analysis and Terrain Elevation Model generation, multidirectional 3D Image generation by DEM can be carried out through this study. This study is to develop a mapping technology with which we can generate 3D Satellite Images of a target district through the composition of Digital Maps and Facility Blueprint and arbitrarily create 3D Perspective Images of the target district from any view point.

• Electronics and Telecommunications Trends
• /
• v.33 no.6
• /
• pp.139-153
• /
• 2018

The explosive interest in block chain, which was triggered by Bitcoin in 2009, is leading to substantial investment and the development of block chain technology. There is no dispute among experts that block chain will be the next generation of innovation. However, despite the high expectations for block chains, the related technology still has certain limitations. In addition to improving issues such as a low transaction throughput, inefficient agreement algorithms, and an inflexible governance structure, it is necessary to solve various problems for commercialization and full-scale spreading owing to the trilemma problem among the scalability, security, and decentralization. Under this situation, identification of the technology characteristics according to the generation is helpful for the development of the core technology requirements and commercialization blueprint in establishing an R&D direction. Therefore, in this article, the development of blockchain technology is divided into generations and analyzed in terms of the operational structure, consensus algorithm, governance, scalability, and security.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.12
• /
• pp.1697-1712
• /
• 2002

Unified Modeling Language (UML) is a standard language for specifying, visualizing, constructing, and documenting the artifacts of software systems. It simplifies the complex process of software design, making a blueprint for construction. In this paper, we apply automated application generation tools such as Rational Rose and BizWiz to a realistic cyber shopping mall and then compare and analyze them in the view of UML. We also propose some methods for the systematic system analysis, design, and implementation by applying UML to a customer management system based on above results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.608-611
• /
• 2003

In this paper, laser direct micromaching is developed to fabricate micro patterns using UV laser ( λ$_3$= 355 nm). Experimentally, laser beam paths mainly influences the surface shape quality. Thus. we proposed laser beam path generator by extracting shape data in a blueprint worked through CAD modeler and using genetic algorithm that considers the characteristics of laser beam. The results show that various shapes of micro patterns could be manufactured using proposed method in this paper.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.51-58
• /
• 2011

Saemankeum is well known for its high speed wind, and it is known that the blueprint of a future city around Saemankeum, including new industrial complex, has been planned. As a result, large-scale offshore wind farm, on the basis of the measurement of wind resource for a long time, can be considered, so that generated electricity can be used to meet the energy demand near the wind farm. Wind speed in Kokunsando of Saemankeum is measured and analyzed with its statistical distribution and wind directions. The probability of wind power resource over Kokunsando of Saemangeum is reviewed with the measured data in one island of Kokunsando. According to measured data, the shape and scale factor of Weibull distribution of wind speed are obtained, and then power density is analyzed as well. Through this study, it is clear that the Saemangeum area has a fluent and abundant wind power source to develop the wind farm in Korea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.469.2-469.2
• /
• 2014

All-solid-state solar cell based on Chloride doped organometallic halide perovskite, (CH3NH3)PbIxCl3-x, has achieved a highly power conversion efficiency (PCE) to over 15% [1] and further improvements are expected up to 20% [2]. In this way, solar cells using novel light absorbing perovskite material are actively being studied as a next generation solar cells. However, making solution-process require high temperature up to $500^{\circ}C$ to form compact hole blocking layer and sinter the mesoporous oxide scaffold layer. Because of this high temperature process, fabrication of flexible solar cells on plastic substrate is still troubleshooting. In this study, we fabricated highly efficient flexible perovskite solar cells with PCE in excess of 11%. Atomic layer deposition (ALD) is used to deposit dense $TiO_2$ as hole blocking layer on ITO/PEN substrate. The all fabrication process is done at low temperature below $150^{\circ}C$. This work shows that one of the important blueprint for commercial use of perovskite solar cells.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.3
• /
• pp.387-419
• /
• 2021

The challenges facing companies and institutions surrounding civil nuclear decommissioning are diverse and many, none more so than those faced in the United Kingdom. The UK's Generation I nuclear power plants and early research facilities have left a 'Nuclear Legacy' which is in urgent need of management and clean-up. Sellafield is quite possibly the most ill-famed nuclear site in the UK. This complex and challenging site houses much of what is left from the early days of nuclear research in the UK, including early nuclear reactors (Windscale Piles, Calder Hall, and the Windscale Advanced Gas Cooled Reactor) and the UK's early nuclear weapons programme. Such a legacy now requires careful management and planning to safely deal with it. This task falls on the shoulders of the Nuclear Decommissioning Authority (NDA). Through a mix of prompt and delayed decommissioning strategies, key developments in R&D, and the implementation of site licenced companies to enact decommissioning activities, the NDA aims to safety, and in a timely manner, deal with the UK's nuclear legacy. Such approaches have the potential to influence and shape other such approaches to nuclear decommissioning activities globally, including in Korea.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.4 s.20
• /
• pp.107-114
• /
• 2004

This paper represents the application of the 3D CAD Model data for 4D simulation and quantity estimation. These support the effective and practical use of 4D CAD model. By using and manipulating the 3D CAD model information, scheduling and quantity estimation could be developed more quickly and effectively. So the 3D CAD model information is made use of not only drawing a blueprint but also playing an important part of data integration platform. The scheduling module sets up the schedule generation logic that consists of period, priority of element arrangement, and time lag of floor placement. It sorts the working items as a priority of working process. And the quantity estimation module queries the material quantity of the structural elements according to the scheduling conditions. These two modules are developed using the 3D CAD model information and assist the function of 4D CAD model.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.2
• /
• pp.27-37
• /
• 2021

In this paper, we propose Automatic detection system of underground pipe which automatically detects underground pipe to help experts. Actual location of underground pipe does not match with blueprint due to various factors such as ground changes over time, construction discrepancies, etc. So, various accidents occur during excavation or just by ageing. Locating underground utilities is done through GPR exploration to prevent these accidents but there are shortage of experts, because GPR data is enormous and takes long time to analyze. In this paper, To analyze 3D GPR data automatically, we use 3D image segmentation, one of deep learning technique, and propose proper data generation algorithm. We also propose data augmentation technique and pre-processing module that are adequate to GPR data. In experiment results, we found the possibility for pipe analysis using image segmentation through our system recorded the performance of F1 score 40.4%.