• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1244-1247
• /
• 2004

For obtaining the best panel quality of color filter on array(COA) architecture in TFF LCD, we investigated the influence of deposition temperature, $O_2$ flow, thickness on the optical transmittance, wet etching and adhesion properties of IZO deposited onto each color photo resist(red, green, blue). Average transmittance of the pixel single layer in the visible range(between 380 and 780nm) was mainly affected by thickness and showed maximum at 1250 ${\AA}$ while the thickness showing peak transparency in each R, G, B wavelength was different. The relation was calculated by using bi-layer transmission and reflectance model, which corresponded to experimental data very well. The adhesion of IZO deposited on each color PR was found to have enhanced value except red PR case, compared to that of IZO which was deposited on $SiN_x$. Wet etching pattern linearity was decreased as the thickness increased. The thickness of IZO was one of vital factors in order to optimize overall pixel process for fabricating COA structure.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.9-15
• /
• 2015

Various studies with regard to increasing the optical efficiency of plasmonic color filters have previously been conducted, such as mixing materials or applying diverse pattern shapes. Fundamentally, it is important to maximize the photonic crystal effect by finding the optimum periods of lattice as well as calculating the most efficient transmission area. In this study, we propose a technical method for optimizing the plasmonic color filters that have a high color gamut and luminance by analyzing the light spectrums based on the 1931 color coordinate system. Moreover, we suggest a calculation method in order to define the individual color purity of red and green and blue filters. Consequently, efficiency values are obtained independently from each color filter by evaluating the color purity and the luminance. The final result obtained from simulation are 27.6% of relative luminance and 25.3% of color gamut. The proposed optimization method is applicable to all plasmonic color filters having photonic crystal arrays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.165-168
• /
• 2003

최근 TV 대응 LCD 제품의 본격적인 양산과 더불어 LCD TV 의 색재현성에 대한 해결과제가 큰 문제로 대두되고 있으며, CRT 급 색재현성의 확보는 LCD TV 의 고급화를 위한 또 하나의 개발 방향이 되고 있다. 그러나, CF(Color Filter)만을 이용한 색재현성의 개선은 근본적으로 한계를 가지고 있으며, 패널 투과율의 저하로 이어져 또다시 고휘도 사양의 BL(Back Light)에 대한 요구가 발생하고 있다. 따라서 본 연구에서는 CF(Color Filter)만에 의한 색재현성의 개선이 아닌 BL 광원 자체의 스펙트럼 최적화를 통해서 CRT 급 색재현성의 확보를 통한 고부가가치 상품개발의 가능성을 제시하고자 하였다. 구체적으로, 램프형광체의 RED 와 Green-Blue 영역에서의 Intensity 향상을 통해서 기존의 CCFL(Cold Cathode Fluorescent Lamp)과는 다른 특성을 광원에 부가하여, 기본의 LCD 패널을 그대로 이용한 경우에도 색재현성을 약 11% 개선하였다.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3711-3716
• /
• 2021

The addition of ferric ferrocyanide (Prussian blue; PB) to adsorbents could enhance the adsorption performance of ¹³³Cs. Toward this goal, we present a heterogeneously integrated carbonaceous material platform consisting of PB in direct contact with CO₂-activated carbon filters (PB-CACF). The resulted sample retains 24.39% more PB than vice versa probed by the ultraviolet-visible spectrometer. We leverage this effect to capture ¹³³Cs in the aqueous environment via the increase in ionic strength and micropores. We note that the amount of PB was likely to be the key factor for ¹³³Cs adsorption compared with specific surface characteristics. The revealed adsorption capacity of PB-CACF was 21.69% higher than the bare support. The adsorption characteristics were feasible and spontaneous. Positive values of 𝜟H^o and 𝜟S^o show the endothermic nature and increased randomness. Based on the concept of capturing hazardous materials via hazardous materials, our work will be of interest within the relevant academia for collecting radionuclides in a sufficient manner.

• ETRI Journal
• /
• v.41 no.3
• /
• pp.358-370
• /
• 2019

The main aim of this study is to select the optimal set of genes from microarray cancer datasets that contribute to the prediction of specific cancer types. This study proposes the enhancement of the feature selection filter algorithm based on Joe's normalized mutual information and its use for gene selection. The proposed algorithm is implemented and evaluated on seven benchmark microarray cancer datasets, namely, central nervous system, leukemia (binary), leukemia (3 class), leukemia (4 class), lymphoma, mixed lineage leukemia, and small round blue cell tumor, using five well-known classifiers, including the naive Bayes, radial basis function network, instance-based classifier, decision-based table, and decision tree. An average increase in the prediction accuracy of 5.1% is observed on all seven datasets averaged over all five classifiers. The average reduction in training time is 2.86 seconds. The performance of the proposed method is also compared with those of three other popular mutual information-based feature selection filters, namely, information gain, gain ratio, and symmetric uncertainty. The results are impressive when all five classifiers are used on all the datasets.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.125-136
• /
• 2013

Purpose: The aim of this study was to investigate the effect of improving read speed with color filter or without color filter to improve reading disorder of teenager who were diagnosed as Meares-Irlen syndrome through survey inspection with Meares-Irlen syndrome visual stress (MISViS) score. Methods: MISViS subjects were selected from screening survey MISViS results given above 2.13 in the clinical criteria scores (MISViS score). Reading speed were measured quickly and efficiently the rate of reading via test in which randomly ordered common words are read aloud during a minute. Each of the subjects were worn a filter of the lowest concentration in each color filter group composed of 15 groups. Results: MISViS score of MISViS group and control group were 2.57 and 0.66, respectively. Results of reading speed with filter and without filter in MISViS group were $102.27{\pm}27.86$ wpm and $118.87{\pm}26.99$ wpm (p=0.001), respectively, as well as were $132.93{\pm}6.88$ wpm and $133.43{\pm}6.64$ wpm (p=0.131) in the normal group. Associated with error changes with filter and without filter between two groups, skipping in MISViS Group were from $0.25{\pm}0.62$ times to 0 times (p=0.191), Errors were from $1.83{\pm}1.69$ times to $0.17{\pm}0.38$ times (p = 0.004) and, repetitions were 0. skipping in control group were 0 times, errors were from $0.21{\pm}0.43$ times to $0.07{\pm}0.27$ times (p=0.336) and, repetitions were from $0.14{\pm}0.36$ times to 0 (p=0.165). The filter of blue series chosen in MISViS group had higher percentage (40%), whereas, subjects in normal group were more likely to prefer the filter of gray color (29%). Conclusions: This study showed that MISViS score have been used as a significant diagnosis for Irlen syndrome screening. This study found that wearing suitable color filter for MISViS patients were useful to improve learning with regard to reading. Unique color filter selection for MISViS subjects must be carefully considered since fit color filter are different personally.

• Korean Journal of Materials Research
• /
• v.19 no.12
• /
• pp.657-660
• /
• 2009

Optical characteristics and structural changes depending on CuO content in phosphate glasses that are used in near-infrared (near-IR) filters were investigated. With phosphate glasses that contain 1-9 mol% CuO, changes in optical transmittance, optical absorption, and color coordinate were measured with a UV-VIS spectrophotometer. An XPS (X-ray photoelectron spectroscopy) analysis was performed to determine valence of copper ion that influences optical characteristics in near-IR filter glasses. Structural changes in glasses depending on CuO content were also analyzed by FT-IR (Fourier transform infrared) and Raman spectrophotometers. From the UV-VIS spectrophotometer results, strong absorption peaks at 220 & 900 nm were found and transmittance was decreased. The color coordinates of the glasses were shifted to the green color direction with CuO addition for increasing absorption of long wavelength range spectra, in spite of the amount of $Cu^{2+}$, which gives a blue color to glasses, and which was increased in XPS results. Also, structural de-polymerization of glasses with CuO addition were found by FT-IR and Raman results.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.115-120
• /
• 2002

Growth and development of Limonium spp.‘Ocean Blue’plantlets were studied under three levels of photosynthetic photon flux (PPF),70,150 and 220 $\mu$mol. $m^{-2}$ . $s^{-1}$ , two levels of $CO_2$ concentration, 500 and 1000 $\mu$mol. $m^{-1}$ , and two levels of number of air exchanges per hour (NAEH),0.1 $h^{-1}$ and 2.8 $h^{-l}$. Explants were obtained from photomixotrophically-micropropagated plantlets. Four explants per vessel were cultured under cool-white fluorescent lamps for 16 h. $d^{-1}$ at 25$\pm$11$^{\circ}C$ and 70~80% relative humidity. In treatments of 2.8 $h^{-1}$ NAEH, a 10 mm round hole made on the vessel cap was sealed with a microporous filter and two $CO_2$ concentrations in the culture rooms were provided from a liquefied $CO_2$ tank. Fresh and dry weights, height, length of the longest root, number of loaves, and leaf area significantly increased with increasing PPF and especially, $CO_2$ concentration. Growth was enhanced by a 2.8 $h^{-1}$ NAEH. Overall, treatment with a 220 $\mu$mol. $m^{-2}$ . $s^{-1}$ PPF and a 1000 $\mu$mol. $m^{-1}$ $CO_2$ resulted in the most vigorous growth of Limonium spp. ‘Ocean Blue’ plantlets.s.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.269-274
• /
• 2010

Purpose: The repeatability of a new Red-Blue phoria chart test (Red-Blue phoria chart; RBP) was appreciated. Methods: Distance (5 m) and near (40 cm) heterophoria was measured in 38 visually normal subjects. Phoria tests using RBP, Howell phoria card (HP), and MIM card (MIM) were done and the repeatability of each phoria test was compared with one another. Results: The mean of horizontal deviations was that RBP was $-0.602{\pm}0.727{\Delta}$, HP was $-0.865{\pm}1.051{\Delta}$, and MIM was $-1.501{\pm}1.346{\Delta}$, at distance, and that RBP was $-2.566{\pm}2.352{\Delta}$, HP was $-2.804{\pm}2.411{\Delta}$, MIM was $-3.838{\pm}2.603{\Delta}$, at near. The repeatability was RBP>MIM>HP in distance tests and MIM>RBP>HP in near tests. Conclusions:RBP test is identified as a reliable phoria test having high repeatability.

• Journal of Sensor Science and Technology
• /
• v.21 no.6
• /
• pp.429-433
• /
• 2012

In this paper, we reduced the optical noise interference in a visible light communication system using two color LEDs. In the transmitter, the original and the inverted signals of the transmitted data modulated a red LED and a blue LED, respectively. In the receiver, a differential detector which is composed of two photodetectors and an optical red filter detected the mixed signal radiated from the two LEDs. In an environment that the optical noise from a fluorescent lamp exists, the signal-to-noise ratio in this system was improved by about 20dB compared to that in the conventional system which uses a single LED and a single photodetector.