• 한국해양공학회지
• /
• 제31권6호
• /
• pp.413-418
• /
• 2017

In the present study, silica-aerogel-polyurethane foams were synthesized to improve the mechanical characteristics and insulation performance of the polyurethane foam applied to a liquefied natural gas carrier at a cryogenic temperature of $-163^{\circ}C$. A silica-aerogel-polyurethane foam bulk was prepared using a homogenizer by varying the weight ratio of the silica aerogel (0, 1, 3, and 5 wt%), while maintaining the contents of the polyol, isocyanate, and blowing agent constant. Compression tests were performed at room and cryogenic temperatures to compare the mechanical properties of the silica-aerogel polyurethane foams. The internal temperature of the universal testing machine was maintained through the cryogenic chamber. The thermal conductivity of the silica-aerogel-polyurethane foam was measured using a heat flow meter to confirm the insulation performance. In addition, the effect of the silica aerogels on the cells of the polyurethane foam was investigated using FE-SEM and FTIR. From the experimental results, the 1 wt% silica aerogel polyurethane foam showed outstanding mechanical and thermal performances.

• 한국식품과학회지
• /
• 제37권3호
• /
• pp.334-338
• /
• 2005

본 연구는 식품병마개 PVC 가스켓과 식품에 함유된 SEM을 효과적으로 분석하기 위해 연구했다. SEM은 발포제로 사용되는 ADC의 열분해산물로 알려졌다. 그러나 SEM은 분자량이 낮으며 ultraviolet light나 fluorescence에 활성을 갖지 않는다. 따라서 2-NBA-SEM으로 유도체화하여 HPLC triple column system으로 분석했을 때 상관관계는 0.9997이상이며 검출한계는 0.48ng/g으로 나타났다. 식품병마개 PVC 가스켓에서 SEM의 검출율은 77.08%로 나타났으며, 유통중인 병마개 PVC 가스켓에서 SEM은 812.20-5771.30ng/g 수준이였다. 그리고 회수율은 PVC 가스켓과 식품에서 각각 92.12-98.71%와 83.45-97.33%로 측정되었다.

• 대한금속재료학회지
• /
• 제48권7호
• /
• pp.625-629
• /
• 2010

This study investigates the effects of porosity on the thermal stability and the thermal shock resistance of a porous nozzle used for blowing an inert gas. The samples of $Al_2O_3-SiO_2-ZrO_2$ system, which had the apparent porosity of 16~30% and bulk density of $2.6{\sim}3.2g/cm^3$, were prepared by adding different graphite contents (5, 10, 20 wt%) as a pore-forming agent. The thermal shock test was conducted at ${\Delta}T=500$, 1000, and $1400^{\circ}C$ also and the thermal stability was also carried out at 1550, 1600, and $1650^{\circ}C$ for 5 hrs. The specimen contained 10 wt% graphite had uniform pore size distribution, whereas the specimen with 20 wt% graphite showed non-uniform pore size distribution. As a result of thermal shock test, the specimen containing 10 wt% graphite appears to have higher mechanical strength than the other specimens (5, 20 wt% graphite). Both the 5 wt% and 20 wt% graphite specimens developed a non-uniform pore size distribution and cracks that were generated by intensive thermal stress.

• 방사선산업학회지
• /
• 제6권3호
• /
• pp.211-215
• /
• 2012

In this study, crosslinked polyethylene (PE) foam sheets were prepared through gamma-ray irradiation. PE foam sheets were prepared through a foaming process using sodium bicarbonate as a blowing and foaming agent. The prepared PE foam sheets were then crosslinked through gamma-ray irradiation. The crosslinking degree was increased to 86.0% with an increase in the absorption dose. The tensile strength of the crosslinked PE foam sheets was increased with an increase in the absorption dose. However, the elongation-at-break of the crosslinked PE foam sheets was decreased. The thermal decomposition temperature of the crosslinked PE foam sheets was increased to $421.2^{\circ}C$ with an increase in the absorption dose. The SEM analysis revealed that the morphology was not changed significantly after the crosslinking through gamma-ray irradiation.

• 한국건축시공학회지
• /
• 제22권1호
• /
• pp.115-123
• /
• 2022

최근 10년간 주거시설에서 발생한 화재 중 공동주택이 약 40%를 차지하고 있다. 공동주택에서 화재 확산 방지와 피난을 위해 방화문의 내화성능과 성능설계가 중요해지고 있다. 본 연구는 화재성능시험을 통과한 2016년부터 2020년까지 품질검사보고서 395건의 DB를 구축하고 방화문의 구조(12개 요소)를 분석을 통하여 방화문 성능영향인자를 도출하였다. 결과로서, 287건의 합격사례에서 내화충진재와 밀도, 접착제, 발포제의 영향을 확인하였다. 한편, 불합격 사례 108건에서 화염발생과 틈새발생이 방화문 내화시험에서 가장 큰 불합격 요소임을 확인하였다. 방화문은 내화성능 불합격을 방지하기 위하여 복합자재들로 구성이 되어 있으며, 구성 요소들의 위치 등 형태를 정형화하여 일률적인 품질관리가 필요하다. 본 연구의 DB 분석 결과를 바탕으로 공동주택의 대피공간문 및 공용부 방화문에 대하여도 추가적인 비교분석이 필요하다.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.400-420
• /
• 1998

We already know that it is very difficult to obtain an "isolated field" for direct bonding during the surgical exposure of unerupted teeth. The aim of this in-vitro study is to simulate the clinical situation of forced eruption and to evaluate the tensile strengths of preligatured button with several types of contamination which can happen during the surgical exposure of unerupted teeth. Four orthodontic direct bonding systems were used. ($Ortho-One^{TM}$, $Rely-a-Bond^{(R)}$, $Ortho-Two^{TM}$, Phase $II^{(R)}$) Each material was divided into four groups(n=20) : Group 1. (Control, no contamination), Group 2. (Rinse etching agent with saline instead of water), Group 3. (Blood contamination of etched surface for 30 seconds), Group 4. (Blood contamination of primed surface for 30 seconds) 320 bovine anterior permanent teeth were divided into the above mentioned 16 groups. Enamel surface was flattened and ground under water coolant. Pre-ligatured buttons were prepared to the same form. (Cut 0.25 ligature wire 10 cm in length. Twist the ligature wire 30 times clockwise. Mark the wire 15mm and 35mm points from button. Make a loop sticking two points together and twist the loop 6 times counterclockwise.) The bonded specimens were stored at $37^{\circ}C$ saline solution for 3 days. Then the tensile strength of each sample was measured with Instron universal testing machine, crosshead speed of 0.5mm/min. The following results were obtained: 1. As compared to control groups (Group 1) of each material, Rely-a-Bond had a significantly lower mean tensile strengths than other material. (p<0.01) 2. In Group 2. of Ortho-One and Rely-a-Bond, the mean tensile strengths decreased about 7.7% and 11.1%, respectively with statistical significances. (p<0.05) 3. In Group 2. of Ortho-Two and Phase II, the mean tensile strengths did not decrease. 4. In Group 3. of Ortho-One, Rely-a-Bond, Ortho-Two, and Phase II, the mean tensile strengths decreased about 60.8%, 56.1%, 60.2%, and 46.0%, respectively with statistical significances. (p<0.01) 5. In Group 4. of Ortho-One and Rely-a-Bond, the mean tensile strengths did not decrease. 6. In Group 4. of Ortho-Two and Phase II, the mean tensile strengths were decreased about 20.95% and 22.28%, respectively with statistical significances. (p<0.01) There were formations of a hump shaped mass from bonding resin under blood contamination which disturbed direct bonding procedure. According to Reynolds, the proper bond strength for clinical manipulation should be at least 45N or about 4.5Kg.F. According to these results, it can be concluded that Ortho-One could be used during surgical exposure of unerupted teeth. In any case, blood contamination of the etched surface should be avoided, but the blood contamination of primed surface of Ortho-One may not decrease bond strength. Just 'blowing-out' is enough to remove blood from primed surface of Ortho-One. You can verify the clean surface of the primer of Ortho-One after blowing out the blood contamination.

• 폴리머
• /
• 제29권6호
• /
• pp.605-612
• /
• 2005

폴리올레핀계 공중합체 수지인 polypropylene-polyethylene-(1-butene) 미발포 수지에 부탄 가스를 물리적 발포제로 이용하여 단열 팽창시킨 발포체의 등온 결정화 거동을 DSC(differential scanning calorimeter)와 편광 현미경을 이용하여 고찰하였으며, 얻어진 결과는 Avrami 식을 이용하여 해석하였다. 발포체의 결정화 반감 시간이 미발포체의 결정화 반감 시간보다 짧고 핵 생성 속도 증가에 따른 nucleation density증가 및 구정 성장 속도가 더 빠름이 발견되었는데, 이는 가공 공정 중의 분자량 감소보다는 단열 팽창 과정에서 진행되는 연신 배향 결정화에 의해 결정화 속도가 증가하였기 때문인 것으로 사료된다. 또한, 단열 구조 발포체는 직경 30 $\mu$m 이하의 균일한 closed cell 형태를 나타내고 있음을 SEM 을 이용하여 관찰하였고, 발포체의 물성은 미발포체에 비해 단열성이 크기 때문에 열전도도가 감소하였고 압축강도는 발포비가 증가할수록 감소하는 것을 알 수 있었다.

• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.39-49
• /
• 2013

Nowadays the printing market has shift from 2D(two dimension) industry to 3D(three dimension) industry, along with IT. With rapidly changing market, it's true that the effort to develop the printing materials and upgrade the printing qualities is produced actively in the country. Particularly, the differences in printing materials can often determine the quality of printings in the printability. In the case of the printability of offset, 9 items(paper, ink, order of printing, ink supply, blowing-up halftone, grey balance, key color(base color), overlap efficiency, quality at the halftone dot reproduction etc.) are usually considered as the important factors and used to estimate the printability at abroad. However, in domestic, ink-jet paper is not used for the printing/publishing by ink-jet printing for digital, but done mainly for offset printing. Because the paper of gloss coated type, which is the ink-jet paper, has high price, it's too hard to manufacture massively printing/publishing. Also, in the case of the paper of uncoated type, in spite of its reasonable price rather than the former, the type of uncoated one also has demerit that the ink-jet paper has a clear difference between the front and the back. Therefore, it's tough reality that Ink Jet paper is hardly taken advantage of as the printing/publishing. Thus, what is done in the first to print and/or publish on ink-jet paper is that the front and the back must be printed evenly, and appropriate to the printability of ink-jet. Although there're some kinds of ink-jet paper in the country, it has not been produced in true domestic production yet. In addition, thanks to the brightness of fluorescence brightening agent, the foreign product can offer the good-qualified one-time printing. But when it comes to the printing/publishing, there're difficulties that it may cause the Ocular Fatigue because of long-term exposure of the eyes to text. This research tries to find out the optimum ink-jet paper in domestic for the printing/publishing by studying on the printability of ink-jet on digital web-printing. And it also tries to look for the paper's brightness which can be reduce the possibility to cause the consumers' Ocular Fatigue.

• Elastomers and Composites
• /
• 제46권4호
• /
• pp.343-351
• /
• 2011

유기나노점토와 인화합물을 함유한 우레탄폼 복합체를 합성하고, 폼 생성속도, 밀도, 몰포로지, 열적특성 분석을 수행하였다. 우레탄폼 복합체는 Cloisite 30B가 박리/분산된 폴리아디페이트디올과 폴리에테르-폴리올(f=4.6), PMDI(f=2.5), D-580(phenyl polyoxyalkenyl phosphate)로부터 제조하였다. 발포제로써 cyclopentane과 증류수가 우레탄폼 복합체의 특성에 미치는 영향을 D-580의 농도 0~2.9 wt%에서 측정하였다. 증류수는 cyclopentane 보다 약 30% 빠르게 폼을 형성시켰다. 증류수로 발포한 우레탄폼 복합체의 밀도는 cyclopentane으로 발포한 경우보다 32~34% 낮았다. 증류수로 발포한 우레탄폼 복합체의 cell은 타원형인 반면에, cyclopentane으로 발포한 복합체는 구형의 형상이며, D-580의 함량이 증가함에 따라 cell 직경이 $158{\mu}m$에서 $100{\mu}m$로 감소하였다. Cyclopentane 으로 발포한 우레탄폼 복합체의 $T_g$는 D-580 함량이 증가함에 따라 $77.6^{\circ}C$에서 $56.1^{\circ}C$로 낮아졌다. 증류수로 발포한 우레탄 복합체의 $T_g$는 D-580 함량이 증가함에 따라 높아졌다. Cyclopentane과 증류수로 발포한 우레탄폼 복합체는 모두 $250^{\circ}C$에서 열분해가 시작하였다. Cyclopentane로 발포한 우레탄폼 복합체는 $500^{\circ}C$ 이상에서 열분해속도가 증가하는 2차 열분해 현상이 측정되었다. D-580에 의한 열안정성의 개선 정도는 cyclopentane으로 발포한 복합체에 비하여 증류수로 발포한 우레탄 복합체에서 더 높게 측정되었다.

• 폴리머
• /
• 제39권2호
• /
• pp.210-218
• /
• 2015

본 연구에서는 아민계 젤화 촉매 dimethylcyclohexyl amine(DMCHA)과 칼륨계 젤화 촉매 potassium octoate(PO)가 경질 폴리우레탄 발포체의 반응거동에 미치는 영향에 대해 연구하였다. Polymeric 4,4'-diphenyl methane diisocyanate, 폴리에스터 폴리올, 실리콘 유화제, 발포제 그리고 젤화 촉매를 사용하여 경질 폴리우레탄 발포체를 제조하였다. DMCHA 촉매의 함량이 0에서 2.0 g으로 증가함에 따라 반응 시간이 약 330초에서 약 35초로 감소하였고, 발열 반응으로 최대 반응온도는 약 217에서 약 $234^{\circ}C$로 증가하였다. PO 촉매의 함량이 0에서 2.5 g으로 증가할수록 반응 시간은 약 79초에서 약 38초로 감소함을 보였고, 특히 젤 타임, 택 프리 타임의 단축에 기여하였으며, 최대 반응온도가 약 182에서 약 $271^{\circ}C$로 증가하였다. 단열 온도 상승법을 이용하여 전환율을 구하였고, 반응식의 상수들을 계산하였다. 반응속도상수 $k_0$는 DMCHA 촉매의 양이 증가할수록 큰 값을 갖는 것을 확인하였고, PO 촉매의 경우 촉매량 증가와 큰 관계없이 유사한 값을 나타냈다.