• 제목/요약/키워드: Blowing

검색결과 568건 처리시간 0.025초

PET 병용 프리폼 사출성형에서 잔류응력과 수축 최소화를 위한 성형조건의 연구 (Investigation of the Molding Conditions to Minimize Residual Stress and Shrinkage in Injection Molded Preform of PET Bottle)

  • 조성환;홍진수;류민영
    • 폴리머
    • /
    • 제35권5호
    • /
    • pp.467-471
    • /
    • 2011
  • PET병은 프리폼(preform)을 사출성형한 후 이를 블로우 성형기에 이송시켜 블로잉하여 성형된다. 내열을 요구하는 병 즉, 주스나 곡류음료용 PET병은 목 부분(neck 또는 thread 부분)에 내열성을 부여하기 위해 프리폼 성형 후 블로잉하기 전에 목 부분을 결정화시킨다. 그러나 사출성형품에 존재하는 잔류응력이 결정화를 방해하기 때문에 프리폼 목 부분의 충분한 결정화를 위해 사출 후 프리폼을 열처리(annealing)한다. 이 열처리는 잔류응력을 해소시키기 위해서 수행하는데 사출 시 성형조건의 최적화를 통하여 잔류응력을 최소화한다면 열처리 시간을 단축시킬 수 있다. 본 논문에서는 사출 시 프리폼에 형성되는 잔류응력을 최소화하고 치수정밀도를 유지하기 위한 연구로 CAE 해석을 통하여 최적 사출조건을 제시하였다. 성형조건별 잔류응력 및 수축률의 변화를 관찰하고 이를 최소화시키는 성형조건을 찾기 위해 실험계획법을 적용하였다. 사출온도, 보압크기, 그리고 사출시간을 인자로 하여 최적의 성형조건을 결정하였다. 잔류응력에 영향을 주는 인자는 사출온도와 사출시간 순으로 나타났고 수축률에 영향을 주는 인자는 사출온도로 나타났다. 본 연구에서 결정한 최적 조건에서 최대 잔류응력, 잔류응력의 분포, 그리고 수축률이 기존 조건에 비해 각각 22%, 40%, 그리고 25% 감소하였다.

젤화 촉매의 종류 및 함량에 따른 경질 폴리우레탄 폼의 반응거동에 관한 연구 (Study on Reaction Behavior of Rigid Polyurethane Foam with Various Types and Contents of Gelling Catalysts)

  • 엄세연;이형일;이기윤
    • 폴리머
    • /
    • 제39권2호
    • /
    • pp.210-218
    • /
    • 2015
  • 본 연구에서는 아민계 젤화 촉매 dimethylcyclohexyl amine(DMCHA)과 칼륨계 젤화 촉매 potassium octoate(PO)가 경질 폴리우레탄 발포체의 반응거동에 미치는 영향에 대해 연구하였다. Polymeric 4,4'-diphenyl methane diisocyanate, 폴리에스터 폴리올, 실리콘 유화제, 발포제 그리고 젤화 촉매를 사용하여 경질 폴리우레탄 발포체를 제조하였다. DMCHA 촉매의 함량이 0에서 2.0 g으로 증가함에 따라 반응 시간이 약 330초에서 약 35초로 감소하였고, 발열 반응으로 최대 반응온도는 약 217에서 약 $234^{\circ}C$로 증가하였다. PO 촉매의 함량이 0에서 2.5 g으로 증가할수록 반응 시간은 약 79초에서 약 38초로 감소함을 보였고, 특히 젤 타임, 택 프리 타임의 단축에 기여하였으며, 최대 반응온도가 약 182에서 약 $271^{\circ}C$로 증가하였다. 단열 온도 상승법을 이용하여 전환율을 구하였고, 반응식의 상수들을 계산하였다. 반응속도상수 $k_0$는 DMCHA 촉매의 양이 증가할수록 큰 값을 갖는 것을 확인하였고, PO 촉매의 경우 촉매량 증가와 큰 관계없이 유사한 값을 나타냈다.

A Study of Teleconnection between the South Asian and East Asian Monsoons: Comparison of Summer Monsoon Precipitation of Nepal and South Korea

  • Choi, Ki-Seon;Shrestha, Rijana;Kim, Baek-Jo;Lu, Riyu;Kim, Jeoung-Yun;Park, Ki-Jun;Jung, Ji-Hoon;Nam, Jae-Cheol
    • 한국환경과학회지
    • /
    • 제23권10호
    • /
    • pp.1719-1729
    • /
    • 2014
  • This study is carried out in order to bridge the gap to understand the relationships between South Asian and East Asian monsoon systems by comparing the summer (June-September) precipitation of Nepal and South Korea. Summer monsoon precipitation data from Nepal and South Korea during 30 years (1981-2010) are used in this research to investigate the association. NCEP/NCAR reanalysis data are also used to see the nature of large scale phenomena. Statistical applications are used to analyze these data. The analyzed results show that summer monsoon precipitation is higher over Nepal ($1513.98{\pm}159.29mm\;y^{-1}$) than that of South Korea ($907.80{\pm}204.71mm\;y^{-1}$) and the wettest period in both the countries is July. However, the coefficient of variation shows that amplitude of interannual variation of summer monsoon over South Korea (22.55%) is larger in comparison to that of Nepal (10.52%). Summer monsoon precipitation of Nepal is found to be significantly correlated to that of South Korea with a correlation coefficient of 0.52 (99% confidence level). Large-scale circulations are studied to further investigate the relationship between the two countries. wind and specific humidity at 850 hPa show a strong westerly from Arabian Sea to BOB and from BOB, wind moves towards Nepal in a northwestward direction during the positive rainfall years. In case of East Asia, strong northward displacement of wind can be observed from Pacific to South Korea and strong anticyclone over the northwestern Pacific Ocean. However, during the negative rainfall years, in the South Asian region we can find weak westerly from the Arabian Sea to BOB, wind is blowing in a southerly direction from Nepal and Bangladesh to BOB.

자연 및 인위적 처리방법 변화에 따른 순환잔골재의 pH저감 (Reduction of pH of Recycled Fine Aggregate due to Natural and Artificial Treatment Method)

  • 한천구;한민철;한상윤
    • 한국건설순환자원학회논문집
    • /
    • 제6권1호
    • /
    • pp.103-110
    • /
    • 2011
  • 본 연구는 폐콘크리트로부터 발생한 성토 복토용 순환잔골재의 pH 저감을 목적으로 자연적 처리 방법 및 인위적 처리 방법을 이용하여 순환잔골재의 pH 저감특성을 비교 분석 하고자 하였는데, 그 결과를 요약하면 다음과 같다. 실내방치된 순환잔골재의 경우는 사람의 호흡 등 대기중 높은 $CO_2$농도로 인해 실외방치된 순환잔골재보다, 또한 쌓기 두께가 얇을수록 pH를 저감시킨 것으로 분석된다. 공기투과의 경우 비교적 순환잔골재의 pH저감이 효과적이었는데 이는 고압의 환풍기로 인해 순환잔골재에 원활한 $CO_2$ 공급으로 pH를 저감시킨 것으로 판단된다. 살수처리의 경우 미수화 시멘트의 수화반응을 촉진시켜 수산화칼슘을 용해시키고, 건조과정중 대기중 $CO_2$에 의한 중성화로 pH를 크게 저감시키는 것으로 나타났으며 침수처리에서는 pH 저감 효과가 미흡하였다. $CO_2$촉진의 경우 순환잔골재의 pH저감 효과가 가장 우수한 것으로 나타났는데, 이는 원활한 $CO_2$공급이 가능하기 때문인 것으로 분석된다. 이상의 실험 결과를 종합하면, pH 저감성능, 경제성 및 작업성 측면을 고려할 경우 순환잔골재 질량비 1: 0.5 비율로 살수한 다음, 강제적인 $CO_2$가스의 처리로 건습을 반복한다면 순환잔골재의 pH저감에 가장 효과적인 방법이 될 것으로 분석된다.

  • PDF

폭력가정 청소년의 가족폭력 경험에 관한 연구 (A Study on the Adolescent폭s Experiences in Domestic Violence)

  • 김경희
    • 대한간호학회지
    • /
    • 제28권1호
    • /
    • pp.70-80
    • /
    • 1998
  • This study is designed to contribute to the nursing intervention of adolescent domestic violence victims by describing specifically what they go through and on this basis work out a grounded theory on the adolescent's experience in domestic violence. The data were analyzed in the framework of grounded theory as mapped out by Strauss & Corbin(1990). The major findings of this research are as follows : The core category was found to be the the adaptation of "Joyudeum" or “Straight jacketing”. The sub-categories identified in the process of grounded data analysis were 'menacing', 'being harassed', 'being pressed', 'being attacked', 'being strapped', 'being filled with anger'. 'getting angry', 'being oppressed', 'being strained', 'becoming hard', 'endurance', 'regulation', 'seriousness'. 'repitition'. 'being helpful', 'dependence', 'thinking oriented', 'blowing off', 'going astray', 'self-deprecating', 'shaking off', 'covering up', 'governing', 'being devoted', 'performing', 'being transformed'. 'bolting', 'being shaken', 'withdrawing', 'disliking', 'bitterness'. These categories were again grouped into 13 categories including 'threatening'. 'straight jacketing', 'tolerance', 'violence', 'supporter', 'supporting type', 'thinking oriented'. 'impulsive response', 'self-controlled', 'response', 'self-reliance', 'wandering', 'withdrawal' and pain'. Of these the five sub-categories 'being filled with anger'. 'getting angry', 'being oppressed', 'being strained', 'becoming hard' were grouped into a core category "straight jacketing". Those adolescents brought up in a violent family go through three stages of the adaptation of "straight Jacketing". that is, generation, response and adaptation. The following four theses were confirmed on the basis of repetitive relations : 1) If a subject's tolerance is strong, the episodes of the violence are frequent and serious, with the resulting straight jacketing being stronger but the subject's supporter is highly mature, the supporting type is concrete and the thinking oriented is wishful, the responses to the straight jacketing result in a self-control whose consequence is self-reliance with part of it resulted in withdrawal and pain. 2) If a subject's tolerance is weak, the episodes of the violence are frequent but not serious, with the resulting straight jacketing being weaker but the subject's supporter is immature, the supporting type is superficial and the thinking oriented is extemporary, the responses to the straight jacketing result in an impulsion whose consequence is wandering with part of it resulted in withdrawal and pain. 3) If a subject's tolerance is weak, the episodes of the violence are frequent and serious, the straight jacketing is strong, the subject's supporter is immature and the supporting type is superficial but the thinking oriented is wishful, the responses to the straight jacketing result in an impulsion whose consequence is withdrawal and pain with part of it resulted in wandering. 4) If a subject's tolerance is strong and the episodes of the violence are infrequent and not serious, the straight jacketing is weak, the subject's supporter is immature and the supporting type is superficial but the thinking oriented is wishful, the responses to the straight jacketing result in a self-control whose consequence is withdrawal and pain with part of it resulted in self-reliance.

  • PDF

광릉 KoFlux 관측지 계곡에서의 국지순환 수치모의 (Numerical Simulation of Local Atmospheric Circulations in the Valley of Gwangneung KoFlux Sites)

  • 이승재;김준;강민석;빈드 말러 타쿠리
    • 한국농림기상학회지
    • /
    • 제16권3호
    • /
    • pp.246-260
    • /
    • 2014
  • 90m 고해상도 SRTM 지형자료를 장착한 WRF 수치모형을 이용하여 광릉 활엽수림 KoFlux 타워(GDK)와 침엽수림 KoFlux 타워(GCK)가 위치한 계곡 및 주변에서의 국지 대기순환을 식생-대기 이산화탄소 순환 및 미기상학적 관점에서 연구하였다. 지표 부근 온도와 바람에 대하여 모형과 관측 결과를 비교함으로써 모형의 전반적인 성능을 평가하였고, 연구 지역에 국지순환이 발생한 맑은 날(Case I)과 흐린 날(Case II) 사례를 선정하여 수치모의를 수행하고 그 결과를 정성적으로 분석하였다. 관측된 바람장은 GDK와 GCK 간에, 또 Case I과 Case II 간에 주간 및 야간 국지풍의 시작, 종료, 지속시간, 강도 등에 차이를 보였다. 모형의 수치모의 결과들은 광릉 KoFlux 타워 관측으로부터 그 가능성이 제기된 관측지 계곡의 배수류가 실제로 존재함을 증거하였다. 전반적으로 모형이 모의한 바람장은 아침의 배수류-사면활승풍 전이와 저녁의 사면활승풍 역전 등을 포함하여 계곡 및 주변에서 관측된 국지풍의 일변화를 현실적으로 모사하였다. 또한 국지풍 간 상호작용의 복잡성도 지시하였는데, 가령 주간에 광릉 관측지 계곡 내부의 서풍은 반드시 산풍인 것은 아니었으며, 종종 약한 종관규모 바람 또는 서쪽에서 불어온 해풍과 같은 보다 큰 규모의 중규모 바람 등 다른 풍계와 결합이 되어 있었다. 광릉 생태계의 에너지, 물질, 정보 흐름의 시공간적 변동을 입체적으로 이해하는데 있어서 이러한 고해상도 국지순환 수치모의 결과는 상당히 유용한 것으로 판단되며, 구축된 국지모의 시스템을 지속적으로 개선하는 노력이 향후 뒤따라야 할 것이다. 아울러, 다른 농림생태계 관측지도 모의 영역에 포함시켜 모형 결과의 활용도를 넓힐 필요가 있다.

태풍 통과에 따른 한국 연근해 수온 변동 (Temporal and Spatial Variation of SST Related to the Path of Typhoons around the Korean Waters in Summer)

  • 서영상;김동순;김복기;이동인;김영섭;김일곤
    • 한국환경과학회지
    • /
    • 제11권7호
    • /
    • pp.627-636
    • /
    • 2002
  • While typhoons were passing by the coastal and offshore waters around the Korean peninsula, the variations of the sea surface temperature (SST) were studied. To study on the variation, the data related to the 22 typhoons among 346 typhoons which occurred in the western Pacific during 1990∼1999, daily measured field SSTs at coastal and offshore, and imageries from advanced very high resolution radiometer on NOAA satellite during 1990∼1999 were used. The average variations of the SSTs were -0.9℃ at coastal waters and -2℃ at offshore around the Korean peninsula while the typhoons were passing by. In very near coastal waters from the land, the SST was not changed because the bottom depth of the coastal waters was shallower than the depth of thermalcline, while the typhoon was passing. The temporal and spatial variation of SSTs at coastal waters in summer were depended on the various types of the typhoons'paths which were passing through the Korean peninsula. When a typhoon passed by the western parts including the Yellow Sea of the Korean peninsula upwelling cold water occurred along the eastern coastal waters of the peninsula. The reason was estimated with the typhoon that was as very strong wind which blew from south toward north direction along the eastern shore of the peninsula, led to the Ekman transport from near the eastern coastal area toward the offshore. While cold water was occurring in the eastern coast, a typhoon passed over the coastal area, the cold water disappeared. The reason was estimated that the cold water was mixed up with the surrounding warm water by the effect of the typhoon. While a cold water was occurring in the eastern coast, a typhoon passed by the offshore of the eastern coast, there were the increasing of the SST as well as the disappearing of the cold water. While a typhoon was passing by the offshore of the eastern coast, the cold water which resulted from the strong tidal current in the western coast of the peninsula was horizontally spread from the onshore to the offshore. We think that the typhoon played the role of the very strong wind which was blowing from north toward south. Therefore, the Ekman transport occurred from the onshore toward the offshore of the western coast in the Korean peninsula.

국산 Fly Ash의 특성 및 단열재로의 이용에 관한 연구 (A Study on Properties of Domestic Fly Ash and Utilization as an Insulation material)

  • 박금철;임태영
    • 한국세라믹학회지
    • /
    • 제20권2호
    • /
    • pp.135-146
    • /
    • 1983
  • This study is to investigate the properties of domestic fly ash for utilization as data in regard to fly ash which is by-product of domestic coal powder plants and the possibility of utilization as insulation material of domestic fly ash. Composition refractoriness size distribution density contents of hollow particles and crystalline phase were examined as the properties of domestic fly ash. As to the fired test pieces of fly ash by itself that varied contents of hollow particles with four kinds and of the fly ash-clay-saw dust system linear shrinkage bulk density app. porosity compressive strength thermal conductivity and structures were investigated for the possibility of utilization as an insulation material. The results are as follows : 1. The properties of the fly ash I) The constituent particle of the fly ash is spherical and it contains not a few hollow particles (floats by water 0.30-0.50 floats by $ZnCl_2$ aq.(SpG=1.71) 6.97-16.72%). ii) The chemical compositions of fly ash are $SiO_243.9-54.1%$ , $Al_2O_321.0-30.7%$ Ig loss is 7.4-24.1% and the principal of Ig loss is unburned carbon. iii) Fly ash was not suitable to use for mortar and concrete mixture because Ig. loss value is higher than 5% 2. Utilization as insulation material I) The test pieces of original fly ash floats by water floats by ZnCl2 aq(SpG=1.71) p, p t by ZnCl2 aq.(SpG=1.71) that were fired at 110$0^{\circ}C$ represented 0.11-0.18 kcal/mh$^{\circ}$ C as thermal conductivity value. ii) The test pieces which (76.5-85.5) wt% fly ash-(8.5, 9.5) wt% clay-(5.0-15.0) wt% saw dust system(68.0-72.0) wt% fly ash -(17.0-18.0)wt% clay-(10.0-15.0) wt% saw dust system and 59.5 wt% fly ash-25.5 wt% clay-15.0wt% saw dust system were fired at 110$0^{\circ}C$ the thermal conductivity was less than 0.1Kcal/mh$^{\circ}$ C. iii) In view of thermal conductivity and economic aspect insulation materials which added saw dust as blowing agent and clay as inorganic binder are better than that of fly ash as it is or separated hollow fly ash particles. iv) When the saw dust contents increased in the (59.5-90.0) wt% saw dust system and when amount of clay de-creased and firing temperature decreased under the condition of equal addition of saw dust app. porosity increased but bulk density compressive strength and thermal conductivity decreased.

  • PDF

PMIC용 5V NMOS-Diode eFuse OTP IP 설계 (Design of 5V NMOS-Diode eFuse OTP IP for PMICs)

  • 김문환;하판봉;김영희
    • 한국정보전자통신기술학회논문지
    • /
    • 제10권2호
    • /
    • pp.168-175
    • /
    • 2017
  • 본 논문에서는 PMIC 칩에 사용되는 BCD 공정기반에서 5V NMOS 트랜지스터와 기억소자인 eFuse 링크로 구성된 저면적의 5V NMOS-Diode eFuse OTP 셀을 제안하였다. 그리고 eFuse OTP 메모리 IP가 넓은 동작전압 영역을 갖도록 하기 위해서 VREF 회로와 BL S/A 회로의 풀-업 부하 회로에 기존의 VDD 파워 대신 voltage regulation된 V2V ($=2.0V{\pm}10%$)의 전압을 사용하였다. 제안된 VREF 회로와 BL S/A회로를 사용하므로 eFuse OTP IP의 normal read 모드와 program-verify-read 모드에서 프로그램 된 eFuse 센싱 저항은 각각 $15.9k{\Omega}$, $32.9k{\Omega}$으로 모의실험 되었다. 그리고 eFuse OTP 셀에서 blowing되지 않은 eFuse를 통해 흐르는 읽기 전류를 $97.7{\mu}A$로 억제하였다. 그래서 eFuse OTP 셀의 unblown된 eFuse 링크가 unblown 상태를 그대로 유지되도록 하였다. 동부하이텍 130nm BCD 공정을 이용하여 설계된 1kb eFuse OTP 메모리 IP의 레이아웃 면적은 $168.39{\mu}m{\times}479.45{\mu}m(=0.08mm^2)$이다.

폴리우레탄 발포체의 물성에 대한 이소시아네이트 인덱스와 노화의 영향 (Effects of Isocyanate Index and Aging on the Physical Properties of Polyurethane Foams)

  • 권현;김상범;김연철
    • 폴리머
    • /
    • 제29권5호
    • /
    • pp.457-462
    • /
    • 2005
  • Polymeric 4,4'-diphenylmethane diisocyanate(PMDI), OH 값이 480인 혼합 폴리올, 실리콘 계면활성제, 세 종류의 촉매 그리고 발포제로 불화탄화수소계를 사용하여 폴리우레탄 발포체(PUF)를 제조하였다. 촉매로는 balance 촉매(PC-8), 젤 화촉매(33LV) 그리고 삼량화 촉매(TMR-2)가 이용되었으며, 이소시아네이트(NCO) 인덱스(index)와 노화시간에 따른 PUF의 물성에 대한 촉매의 영향을 조사하였다. PC-8과 33LV를 이용한 PUF의 압축강도는 NCO 인덱스에 따라 큰 변화를 보이지 않은 반면 발포셀의 크기는 약간 증가하였다. 삼량화 촉매의 경우에, PUF의 압축강도는 NCO인덱스에 따라 8.75에서 $10.5 kg_f/cm^2$으로 증가하였고 발포셀의 크기는 감소하였다. 33LV를 이용한 PUF의 압축강도는 노화시간이 증가함에 따라 9.21에서 $10.15 kg_f/cm^2$으로 증가하였으나 삼량화 촉매인 TMR-2를 이용한 경우에는 거의 변화가 나타나지 않았다. 이는 미반응 MDI에 의한 추가적인 가교반응에 의해 설명할 수 있고 FTIR의 결과로 확인하였다.