• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.359-364
• /
• 2007

APU 가스터빈엔진의 연료분무특성을 연구하였다. 지상 및 고도 작동조건에 대한 연료분무특성 실험을 수행하여 APU 엔진의 실화 가능성을 검토하였다. 분무실험은 4개의 작동조건에 대하여 수행되었으며 각 조건은 지상 무부하 및 통합부하 조건과 고도 20,000 feet 무부하 및 통합부하에 대한 실험을 수행하였다. 분무특성은 PDPA를 이용한 입자의 크기 및 속도 측정과 레이저 빔을 이용한 가시화를 수행하였다. 연구결과 20,000 feet 무부하의 경우 입자의 크기가 100 ${\mu}m$정도이며 분무속도가 10 m/s로 낮아 화염안정성을 위한 개선이 필요할 것으로 판단된다.

• 대한두개안면성형외과학회지
• /
• 제20권6호
• /
• pp.347-353
• /
• 2019

Most orbital surgeons believe that it's difficult to restore the primary orbital wall to its previous position and that the orbital wall is so thin that cannot be firmly its primary position. Therefore, orbital wall fractures generally have been reconstructed by replacing the bony defect with a synthetic implant. Although synthetic implants have sufficient strength to maintain their shape and position in the orbital cavity, replacement surgery has some drawbacks due to the residual permanent implants. In previous studies, the author has reported an orbital wall restoring technique in which the primary orbital wall fragment was restored to its prior position through a combination of the transorbital and transantral approaches. Simple straight and curved elevators were introduced transnasally to restore the orbital wall and to maintain temporary extraorbital support in the maxillary and ethmoid sinus. A transconjunctival approach provided sufficient space for implant insertion, while the transnasal approach enabled restoration of the herniated soft tissue back into the orbit. Fracture defect was reduced by restoring the primary orbital wall fragment to its primary position, making it possible to use relatively small size implant, furthermore, extraorbital support from both sinuses decreased the incidence of implant displacement. The author could recreate a natural shape of the orbit with the patient's own orbital bone fragments with this dual approach and effectively restored the orbital volume and shape. This procedure has the advantages for retrieving the orbital contents and restoring the primary orbital wall to its prior position.

• 보건교육건강증진학회지
• /
• 제6권2호
• /
• pp.66-75
• /
• 1989

About smoking and health control by theorize of common with various records investigation prevent an injury from smoking Further, should be contribute for the national health improvement for application of guide to health education. The results of investigation are as follows; 1) Tobacco be transmitted the first year of KwangHea's(reign) from GeeRu(the year of GeeRu), before sixth year of KwangHea's GapIn. 2) By reason of smoking an extreme poison ingerdients is Nicotine, Co, Tar etc three kinds. 3) The number of chemicalcompound in the tobacco smoking. Nicotine play an important part of it makes continue to smoking act. 4) Co, Not only injury vascular in the cell wall but also influence in ardiac muscular tissue. 5) Tar, is play an important part tl determine taste of tobacco or fragrace(a sweet smell). 6) Be demaged in the body with harmful objects of tobacco is first lung cancer, next heart disease, and chronic lung disease etc. 7) Passive smoke(indirect smoke)is first smoker's when have smoking and blow smoke from cigarette take smoking. On second when take smoking as it is burning cagar to end. 8) Female smoker are no good and bring many trouble to the mother's body and fetal body(an unborn child). 9) Nicotine also, like drug and alcohol break out reliance, introspection, poisonous or obstinence syndrome 10) A counterplan about smoke should be settlement with propriety control of smoking and an antismoking(non-smoker).

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.569-579
• /
• 2004

The lift-off characteristics of lifted laminar propane jet flames highly diluted with nitrogen are investigated introducing acoustic forcing with a fuel tube resonance frequency. A flame stability curve is obtained according to forcing strength and the nozzle exit velocity for N2 diluted flames. Flame lift-off behavior is globally classified into three regimes; 1) a weakly varying partially premixed behavior caused by a collapsible mixing for large forcing strength, 2) a coexistent behavior of the edge flame and a weakly varying partially premixed behavior for moderate forcing strength, and 3) edge flame or triple flame behavior for small forcing. It is shown that the laminar lifted flame with forcing affects flame lift-off behavior considerably, and is also clarified that the flame characteristic of flame base is well described with the penetration depth of the degree of mixing, ${\gamma}$$\_$$\delta$/. It is also confirmed that the weakly varying partially premixed flame caused by a collapsible mixing fur large forcing strength behaves as that just near flame blow-out in turbulent lift-off flame.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권4호
• /
• pp.373-378
• /
• 1998

In the midfacial fracture, the orbital region presents many additional complication unique to the orbit. Among them are ectropion, entropion, lid ptosis, injury to the lacrimal apparatus, diplopia or the late development of enophthalmos. The residual problem confronting the surgen is usually enophthalmos or diplopia. Enophthalmos becomes cosmetically obvious at 3mm and if more severe it can interfere with vision from obstruction by the orbital rim. In this clinical situation, many patients prefer the simpler intraorbital volume expansion to the more complex orbital osteotomy. In general, except in mild cases of enophthalmos, the procedure of choice is osteotomy and repositioning for zygoma fracture and volume augmentation for blow-out fracture. Late treatment is performed by volume augmentation based on the CT findings behind the axis of the globe. Inferiorly placed grafts elevate the globe, posterior superior grafts move the globe anterior and medially positioned grafts push the globe laterally. In this two cases, the patients who has stable orbitozygomatic rim, the use of calvarial bone grafts more than 3 areas around intraorbital content, we corrected late enophthalmos combined with diplopia. As result, the first patient had 2mm advance in exophthalmometric check with improvement of the diplopia gradually. The second patient had 1.5mm advance with correction of vertical ocular dystopia and cosmetically good results respectively.

• 한국가시화정보학회지
• /
• 제10권1호
• /
• pp.15-20
• /
• 2012

PCV(Positive Crankcase Ventilation) system is designed to remove blowby gas. In this system, a PCV valve is attached in a manifold suction tube to control the flow rate of blowby gas which generates various operating conditions of an automotive engine. As this valve plays a crucial role, the demand in its design is high owing to the small size and high velocity. For this reason, a numerical investigation was carried out to understand both the spool dynamic motion and internal fluid flow characteristics. As a result, the spool dynamic characteristics(i.e. displacement, velocity, acting force), increase in direct proportion to the magnitude of the pressure difference and indicate periodic oscillating motions. Moreover, the velocity at the orifice region decreases according to the increase in differential pressure due to energy loss caused by the sudden decrease of flow area at the orifice region and the increase of flow volume in front of the spool head. Finally, the mass flow rate at the outlet decreases with the increase of spool displacement.

• 소성∙가공
• /
• 제26권4호
• /
• pp.222-227
• /
• 2017

In order to respond to environmental regulations and increased demand for fuel economy, the demand for lightweight car bodies has grown. Hydroforming of aluminum is one possible solution as it eliminates the need for additional welding to develop closed cross-sectional parts. However, the low formability of aluminum is a limitation of its application. On the other hand, the ductility of materials can be improved at higher temperatures, and hot metal gas forming has been widely applied in the production of lightweight vehicle parts. In this study, aluminum alloy for pipe extrusion was developed by controlling the Mg:Cr:Mn ratio based on AA5083. Mechanical properties of the developed material were examined by tensile test and were applied to a forming simulation. Cold forming simulation for preforming and non-isothermal hot forming simulation for hot metal gas forming were carried out to validate process conditions. A prototype of the sidemember was manufactured under the given process condition. Finally, thickness distribution was compared with finite element analysis results.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.51-60
• /
• 1997

In this paper, we investigated the heating performance and the basic characteristics required for normal combustion of kerosene fan heater. And also the iso-velocity contours and the iso-temperature contours of hot gas discharged from the exit of kerosene fan heater were analyzed. The experiment was carried out with kerosene fan heater attached to the blow-down-type subsonic wind tunnel with a test section of $240mm{\times}240mm{\times}1200mm$. The purpose of this paper was to obtain the basic data for new design from conventional kerosene fan heater. Consequently it was found that (i) the pressure ratio $P_2/P_1$ had a comparatively constant value of 0.844 according to the increase of the revolution of turbo fan, (ii) the primary excess air ratio had a range of $0.84{\sim}1.11$ during normal combustion, and (iii) the heating performance of kerosene fan heater had a range of $1,494{\sim}3,852kcal/hr$.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.125-135
• /
• 1998

The shielded metal arc welding (SMAW) by AC power source was performed to evaluate the arc stability by arc monitoring and analysing. In this study, the arc stability index was evaluated quantitatively by using he coefficient of resistance variation for welding time. This coefficient was obtained for the long time (20sec.) by analysing the waveforms of welding current, voltage and resistance. The coefficient was applied to indicate numerically the variation level of arc length and the degree of arc extinction. Using the coefficient of resistance variation in practical welding, the arc stability of the high titanium oxide electrode (KS E4313) turned out to be better than that of the low hydrogen electrode (KS E4316). In evaluating the skill level of welders by the coefficient, the horizontal fillet weaving welding became clear to be very discriminating because the higher level welder could weave in keeping constant arc length, but the lower level welder showed the characteristics of weaving with the unstable arc length. And it was confirmed that the welding defects as blow holes was formed when the arc stability index were high.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.86-92
• /
• 2012

An exploration well is drilled where oil or gas potential is shown by a seismic survey and interpretation. With the advance of drilling technology, most of the easily accessible oil had been developed by the end of the 20th century. To satisfy the ever increasing demand for oil, and bolstered by high oil prices, the major oil companies started to drill in deep water, which requires a deep offshore drilling unit. Offshore drilling units are generally classified by their maximum operating water depth. Many semi-submersible rigs have been purpose-designed for the drilling industry as the allowable drilling water depth has become deeper by the developed technics since the first semi-submersible was launched in 1963. Semi-submersible rigs are commonly used for shallow to deep water up to 3,000 m. Drilling equipment such as a top drive, blowout preventer, drawworks and power system, mud circulation system, and subsea wellhead system are explained to help with an understanding of offshore drilling procedures in the oil and gas fields. The objective of this paper is to introduce the main components of a semi-submersible rig and, by doing so, to raise the awareness of offshore drilling, which accounts for over 30% of the total oil production and will continue to increase.