• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권7호
• /
• pp.550-555
• /
• 1999

This paper deals with the effect of lightning impulse current on electrical characteristics of ZnO blocks used in distribution lightning arrester. The electrical characteristics of ZnO blocks are degraded by overtime impulse current, and the degraded ZnO block is brought to a thermal runaway and finally destroyed. It is therefore important to estimate the change of electrical characteristics of ZnO blocks. In this study, an impulse current generator which can produce 8/20$[\mus]$, 3[㎄] and 4/10$[\mus]$, 5[㎄] waveform is designed and fabricated to simulate the lightning impulse current of power systems. Total energy applied to the ZnO blocks at each time is 739[J] in 8/20$[\mus]$, and 523[J] in 4/10$[\mus]$, impulse current, respectively. From the experimental results, the 3rd harmonic of the leakage current increases continuously with the number of applied impulse current, but no significant changes in residual voltage and in reference voltage are observed until the ZnO block is destroyed. Also, it is confirmed that the main factor on degradation of ZnO blocks is rather the total energy applied to ZnO blocks than the peak value of the impulse current.

• 한국환경복원기술학회지
• /
• 제18권5호
• /
• pp.27-36
• /
• 2015

This study was conducted to grasp the effect of afforestation of cut slope using coir blocks on the improvement of scenery and the management of non point pollution source. Total four experimental tanks such as general soil slope, coir blocks, installation slope, slope refilling the inside of coir blocks slope with pebble, slope refilling the inside of coir blocks with soil and plant were installed, pollution source water was supplied and the possibility of reduction management of non point pollution source was analyzed at four items of COD, SS, T-N, T-P and main results drawn from this study are as follows. In conclusion, biodegradable materials like coir blocks and soil and plant layers are judged to be helpful in reduction management of non point pollution source inflowing to water space from land area. Thus, the reduction of non point pollution source occurring at land area is thought to be fully controlled at the cut slope, the space prior to inflowing to water ecological space like a stream or a swamp area.

• 패션비즈니스
• /
• 제12권3호
• /
• pp.136-152
• /
• 2008

The purpose of this study was to provide dress forms and jacket blocks for adult males based on the analysis of their somatotypes. As the result of the research conducted for this study that was based on 1290 males of 20 to 54 years-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth. Also, master sizes were selected considering appearance frequency. XS type (master size: height 165cm and chest circumference 88cm), Yd type (master size: height 170cm and chest circumference 91cm), YI and AD2 types (master size: height 170cm and chest circumference 94cm) were selected to develop dress forms and their jacket blocks in this study. The procedure and results were follows; 1. The dress forms of XS, Yd, YI and AD2 types were produced base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New jacket blocks for XS, Yd, YI and AD2 types were developed based on the body surface developments through draping and the results of comparative investigation on the existing jacket blocks by wearing test. Also the drafting methods of new jacket blocks were provided. 3. The sensory evaluation by wearing test showed that the developed jacket blocks were estimated more highly in terms of chest's allowance, the front width's allowance, neck wrinkle, front allowance and overall appearance's fitness items than existing jacket blocks.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.81-87
• /
• 2010

PURPOSE. The purpose of this study was to compare the linear sintering behavior of presintered zirconia blocks of various densities. The mechanical properties of the resulting sintered zirconia blocks were then analyzed. MATERIALS AND METHODS. Three experimental groups of dental zirconia blocks, with a different presintering density each, were designed in the present study. Kavo $Everest^{(R)}$ ZS blanks (Kavo, Biberach, Germany) were used as a control group. The experimental group blocks were fabricated from commercial yttria-stabilized tetragonal zirconia powder (KZ-3YF (SD) Type A, KCM. Corporation, Nagoya, Japan). The biaxial flexural strengths, microhardnesses, and microstructures of the sintered blocks were then investigated. The linear sintering shrinkages of blocks were calculated and compared. RESULTS. Despite their different presintered densities, the sintered blocks of the control and experimental groups showed similar mechanical properties. However, the sintered block had different linear sintering shrinkage rate depending on the density of the presintered block. As the density of the presintered block increased, the linear sintering shrinkage decreased. In the experimental blocks, the three sectioned pieces of each block showed the different linear shrinkage depending on the area. The tops of the experimental blocks showed the lowest linear sintering shrinkage, whereas the bottoms of the experimental blocks showed the highest linear sintering shrinkage. CONCLUSION. Within the limitations of this study, the density difference of the presintered zirconia block did not affect the mechanical properties of the sintered zirconia block, but affected the linear sintering shrinkage of the zirconia block.

• Journal of Korean Neurosurgical Society
• /
• 제52권3호
• /
• pp.228-233
• /
• 2012

Objective : Chronic neck or back pain can be managed with various procedures. Although these procedures are usually well-tolerated, a variety of side effects have been reported. In this study we reviewed cases of unexpected temporary adverse events after blocks and suggest possible causes. Methods : We reviewed the records of patients treated with spinal pain blocks between December 2009 and January 2011. The types of blocks performed were medial branch blocks, interlaminar epidural blocks and transforaminal epidural blocks. During the first eight months of the study period (Group A), 2% mepivacaine HCL and triamcinolone was used, and during the last six months of the study period (Group B), mepivacaine was diluted to 1% with normal saline. Results : There were 704 procedures in 613 patients. Ten patients had 12 transient neurologic events. Nine patients were in Group A and one was in Group B. Transient complications occurred in four patients after cervical block and in eight patients after lumbar block. Side effects of lumbar spine blocks were associated with the concentration of mepivacaine (p<0.05). The likely causes were a high concentration of mepivacaine in five patients, inadvertent vascular injection in three patients, intrathecal leak of local anesthetics in one, and underlying conversion disorder in one. Conclusion : Spinal pain blocks are a good option for relieving pain, but clinicians should always keep in mind the potential for development of inevitable complications. Careful history-taking, appropriate selection of the anesthetics, and using real-time fluoroscopy could help reduce the occurrence of adverse events.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권2호
• /
• pp.164-168
• /
• 2002

In this article, we present the novel approach of avoiding temporal insufficiency of data blocks, jitter, which occurs due to the commencement of new session. We propose to make the sufficient amount of data blocks available on memory such that the ongoing session can survive the cycle extension. This technique is called ″pre-buffering″. We examine two different approaches in pre-buffering: (i) loads all required data blocks prior to starting playback and (ii) incrementally accumulates the data blocks in each cycle. We develop an elaborate model to determine the appropriate amount of data blocks necessary to survive the cycle extension and to compute startup latency involved in loading these data blocks. The simulation result shows that limiting the disk bandwidth utilization to 60% can greatly improve the startup latency as well as the buffer requirement for individual streams.

• 한국멀티미디어학회논문지
• /
• 제7권12호
• /
• pp.1665-1670
• /
• 2004

The general fractal image compression provides a high compression rate, but it requires a large encoding time. In order to overcome this disadvantage, many researchers have introduced various methods that reduce the total number of domain blocks considering their block similarities or control the number of searching domain block depending on its distribution. In this paper, we propose a method that can reduce the number of searching domain blocks employing the variance coherence of intensity values and also the number of range blocks requiring the domain block search through the classification of range blocks. This proposed method effectively reduces the encoding time and also a negligible drop of the quality as compared with the previous methods requiring the search of all range blocks.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.233-236
• /
• 1999

In this paper. Compression in the case where dissimilar blocks are twinned variously are carried out in the condition of lubricated interface. The degree of growth is experimentally investigated. Moreover, numerical simulations are carried out by the elastic-plastic FEM for the case of the dissimilar blocks with the initial sawtooth angle of $60^{\circ}$ . The dissimilar blocks are twinned, larger difference between material properties leads smaller growth, and the degreased interface leads smaller growth than that in the lubricated one. Furthermore, by the simulation of compression where dissimilar blocks are twinned, it is confirmed that the tendency of the general deformation pattern is very similar to the experiment.

• 한국산업정보학회논문지
• /
• 제6권1호
• /
• pp.39-47
• /
• 2001

A blocked zerotree coding algorithm for compression of subband image is proposed. Significance of blocks with respect to a certain threshold are coded with a set of transition rules for the significance of blocks. Significant blocks are quantized by vector quantization. The basic idea for this coding approach are: 1) Subband images are coded by blocks, 2) Important blocks based on the significance of blocks are coded and quantized, 3) Multiband codebook which is composed of sub-codebooks dedicated for each threshold and subband level is adapted to produce good reproduction vectors for vector quantization. The compression results are similar to Shapiro's zerotree coding even though ours are obtained without entropy coding of bit streams from blocked zerotree encoder. If an entropy coding is applied to the bitstream, PSNR will be improved.

• Ocean Systems Engineering
• /
• 제2권4호
• /
• pp.271-287
• /
• 2012

Due to its large size, a ship is first divided into scores of blocks and then each block is constructed through various shops, such as the assembly shop, the painting shop, and the outfitting shop. However, each block may not be directly moved to the next shop and may be temporarily laid at a block stockyard because the working time in each shop is different from each other. If blocks are laid at the block stockyard without any planning, the rearrangement of the blocks by a transporter is required because the blocks have the different in and out time. In this study, a block layout method based on the genetic algorithm was proposed in order to minimize the rearrangement of the blocks in the block stockyard. To evaluate the applicability of the proposed method, it was applied to simple layout problems of the block stockyard. The result shows that the proposed method can yield a block layout that minimizes the total relocation cost of moving obstacle blocks in the block stockyard.