• 대한의용생체공학회:의공학회지
• /
• 제11권2호
• /
• pp.257-268
• /
• 1990

A system has been developed for monitoring the effect of neuromuscular blocking frugs and the neuromuscular function during anesthesia and surgery. This system is composed of software and hardware, the latter are nerve stimulator, force transducer, interface board(preamplifier, filter, peripheral input/output) and personal computer (apple ll) , the former are programmed in ASSEMBLY and BASIC language. The nerve stimulator which is controlled by personal computer is capable of delivering single shocks at o.)Hz, train of four at 2Hz and tetanic stimulation at 30, 100, 200Hz. The response, adduction of the thumb, is sensed by the force transducer. The output of the force transducer Is amplified, filtered, converted digital signal and then processed by the per- sonal computer. The personal computer quantia4es twitch and traln of four tesponse and calculates the 74 ratio (Ta/Tl )between the first and fourth response of train of four. This ratio is used to estimate the level of the neuromuscular block. This system has reaserch potential for determining the effect of newer neuromuscular blocking drugs for comparlsion with presently used drugs of alternatively, for delerminig the effects of blocking drugs in altered physilogical states.

• Elastomers and Composites
• /
• 제49권1호
• /
• pp.1-12
• /
• 2014

전투기 연료필터의 막힘은 조종사 생명과 전투기의 손실에 큰 영향을 줄 수 있다. 따라서 결함 연구는 사고를 미연에 방지하는데 매우 중요하다. 전투기 연료필터는 제트 연료에 포함된 다양한 불순물을 여과하는 중요한 기능을 수행한다. 연료 필터는 시간당 1,330 파운드의 유속으로 공급되는 제트 연료에 함유된 10 ${\mu}m$ 크기 이하의 불순물을 여과한다. 필터는 운영시간 기준 500 시간마다 교체되어야 한다. 그러나 500 시간이 도달하기 훨씬 전에 연료 필터의 막힘 현상으로 경고등이 켜지고 있다. 이와 같은 유사한 결함이 최근에 반복적으로 발생하고 있다. 그러므로, 이 연구에서는 전투기의 연료 필터 막힘에 대한 원인을 FT-IR microcopy, FE-SEM/EDS, 총 황함량 분석기와 같은 다양한 분석기술을 이용하여 조사하였다. 결론적으로, 연료 필터를 막히게 한 물질은 내부 연료 탱크용 실란트에서 기인한 가류 촉진제로 확인되었다. 그리고 연료 탱크내에서 가류 촉진제 블루밍 현상에 의해 연료필터를 막히게 하는 물질의 형성에 대한 메커니즘을 제시하였다.

• 수산해양기술연구
• /
• 제58권1호
• /
• pp.19-31
• /
• 2022

Damages by jellyfish are occurring frequently around the world. Among them, accidents caused by jellyfish stings are serious enough to cause death. So we designed a jellyfish blocking net and analyzed its stability to prevent sting caused by jellyfish entering the beach. To this end, the dynamic behavior of the jellyfish blocking net according to the current speed (0.25-1.0 m/s) and the net type (50, 100 and 150 mm) on the upper part of the blocking net was modeled using the mass spring model. As a result of simulations for the model, the horizontal tension (horizontal component of the mooring tension) of the mooring line increased with the decrease in the mesh size on the upper part of the blocking net at all current speeds, but exceeded the holding force at high tides faster than 0.5 m/s and exceeded the holding force at all current speeds at low tide. Therefore, the jellyfish blocking nets showed poor stability overall. The depth of the float line had a little difference according to the upper mesh size and increased lineary proportional to the current speed. However, the float line sank too much to block the incoming jellyfish. These analysis results helped us find ways to improve the stability of the jellyfish blocking net, such as adjusting the length of the mooring line and improving the holding power. Therefore, it is expected that this technology will be applied us various underwater structures to discover the weaknesses of the structures and contribute to increasing the stability in the future.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.57-64
• /
• 2007

The purpose of this study was to investigate comparative analysis of the vertical ground reaction force variables during landing from vertical jump blocking in volleyball through GRF analysis system. The subjects participated in this study were 6 male university volleyball player and 6 male acted as a control group. The results are as follows: 1. The skilled group was longer than the unskilled group in flight time during vertical jump blocking. 2. The skilled group was faster than the unskilled group in tFz2 during landing from vertical jump blocking. 3. The skilled group was higher than the unskilled group in Fz2 during landing from vertical jump blocking. 4. The skilled group was higher than the unskilled group in Fz2LR during landing from vertical jump blocking. 5. The skilled group was higher than the unskilled group in impulse during landing from vertical jump blocking. Consequently, during landing from vertical jump, the landing strategy of the skilled group was found as a form of a stiff landing. Therefore, this landing strategy will be required to strengthen of hip and knee extensors and ankle plantar flexors for injury prevention.

• 시큐리티연구
• /
• 제50호
• /
• pp.307-337
• /
• 2017

집회의 자유는 헌법에서 보장하고 있는 기본권적 자유이다. 우리의 현실을 보면 집회의 자유는 경찰의 관리통제 하에 있을 때에만 보장되고, 그렇지 않을 때는 진압해야 할 대상으로 인식되고 있다. 심지어 경찰은 '깨진 유리창 이론(broken window theory)'을 거론하면서 조그만 불법이 심각한 불법․폭력시위로 변질될 수 있다는 이유로 집회의 평화성 보다는 '준법'여부에 집착하고 있는 듯한 태도를 보여주고 있다. 이러한 태도는 집회에 참여하는 시민을 진압해야 할 대상으로 내몰게 되는 결과를 초래하고 있다. 이 글은 최근 문제되고 있는 경찰물리력 사용수단으로서 차벽과 물포를 중심으로 물리력 사용요건과 현황을 분석하고, 그 개선방안을 제시하였다. 우선, 차벽의 설치는 집회장소를 항의의 대상으로부터 분리시킴으로써 집회가 갖는 본질적인 소통의 기능을 차단하고 있다. 따라서 차벽설치는 불법행위에 직면하여 예방을 위한 경고에도 불구하고 차벽설치 이외 다른 방법으로는 '사람의 생명 신체에 위해를 끼치거나 재산에 중대한 손해를 끼칠 우려가 있는 긴급한 경우'에 한하여 허용되어야 할 것이다. 이러한 긴급성이 없다면 차벽은 사전예방적 차원뿐만 아니라 사후예방적 차원에서도 허용되어서는 안된다. 물포는 사람의 생명․신체에 위해를 가할 우려가 있는 경찰장비로서 기본권의 중대한 제한을 가져오는 강제조치이다. 따라서 사람의 신체에 중대한 위험을 초래할 수 있는 조준 직사살수는 원칙적으로 금지되어야 한다. 다만 그 위험성을 고려하여 타인의 법익이나 공공의 안녕질서에 직접적인 위험이 '명백하게 초래'된 경우에 한하여 다른 대안이 없는 경우에 보충적으로 사용하여야 한다. 아울러 그 사용기준 등에 대해서는 물포가 위해성 경찰장비인 점을 고려하여 법률로 명시해야 한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.520-528
• /
• 2015

The piezoelectric-hydraulic actuator is a hybrid device that consists of a hydraulic pump driven by a piezo-stack coupled to a conventional hydraulic cylinder. The actuator is of compact size, but can produce a moderate energy output. Such hybrid actuators are currently being researched and developed in many industrialized countries due to the requirement for high performance and compact flight systems. In a previous study, we designed and manufactured a unidirectional hybrid actuator. However, the blocking force was not as high as expected. Therefore, in this study, we redesigned the pump chamber and hydraulic cylinder and also improved the system by removing the air bubbles. Two different types of piezo-stacks were used. In order to achieve bidirectional capabilities in the actuator, commercial solenoid valves were used to control the direction of the output cylinder. Experimental testing of the actuator in unidirectional and bidirectional modes was performed to examine performance issues related to driving frequency, bias pressure, reed valve thickness, etc. The results showed that the maximum blocking force was measured as 970.2N when the frequency was 185Hz.

• Composites Research
• /
• 제20권3호
• /
• pp.50-54
• /
• 2007

본 연구에서는 IPMC의 기본적인 기계적 특성을 알아보았다. 기전폴리머의 한 종류인 IPMC는 굽힘형 작동, 가벼움, 저전력 소모, 유연성 등의 많은 장점을 가진 재료이다. 따라서 IPMC는 생체모방형 작동기와 센서로서 많은 가능성을 가지고 있다. 이런 가능성을 바탕으로 IPMC를 실제로 응용하기 위하여 IPMC의 변형, 구동력, 주파수 응답 등 기본적인 기계적 특성을 연구하였다. 우선 이온교환폴리머의 한 종류인 네피온 용액을 사용하여 여러 가지 두께의 네피온 막을 만들고, 무전해 도금을 통해 IPMC를 제작하였다. 이렇게 제작된 IPMC의 규격, 인가 전압에 따른 변형, 구동력, 주파수 응답 특성에 관한 실험을 수행하고, 실험 결과를 통해 IPMC 성능의 실험식과 등가 강성 모델을 수립하였다.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.324-333
• /
• 2013

Recently, rudder erosion due to cavitation has been frequently reported on a semi-spade rudder of a high-speed large ship. This problem raises economic and safety issues when operating ships. The semi-spade rudders have a gap between the horn/pintle and the movable wing part. Due to this gap, a discontinuous surface, cavitation phenomenon arises and results in unresolved problems such as rudder erosion. In this study, we made a rudder model for 2-D experiments using the NACA0020 and also manufactured gap flow blocking devices to insert to the gap of the model. In order to study the gap flow characteristics at various rudder deflection angles($5^{\circ}$, $10^{\circ}$, $35^{\circ}$) and the effect of the gap flow blocking devices, we carried out the velocity measurements using PIV(Particle Image Velocimetry) techniques and cavitation observation using high speed camera in Seoul National University cavitation tunnel. To observe the gap cavitation on a semi-spade rudder, we slowly lowered the inside pressure of the cavitation tunnel until cavitation occurred near the gap and then captured it using high-speed camera with the frame rate of 4300 fps(frame per second). During this procedure, cavitation numbers and the generated location were recorded, and these experimental data were compared with CFD results calculated by commercial code, Fluent. When we use gap flow blocking device to block the gap, it showed a different flow character compared with previous observation without the device. With the device blocking the gap, the flow velocity increases on the suction side, while it decreases on the pressure side. Therefore, we can conclude that the gap flow blocking device results in a high lift-force effect. And we can also observe that the cavitation inception is delayed.

• 한국전산유체공학회지
• /
• 제17권3호
• /
• pp.18-24
• /
• 2012

The aerodynamic performance of the pantograph on a high speed train was compared for different pantograph covers which are designed to block the aero-acoustic noise from the pantograph. For the study, two types of cover are designed: wedge and cone types. The lift force of pantograph with cover was compared with the force of pantograph only. The comparison clarified that the cone type cover increases the sideslip angle of the flow and decreases the lift force considerably. However, the wedge type cover changes the flow direction upward and increases the lift force of the pan head. This increment of lift force compensates the decrement of lift force caused by the blocking of the flow into the pantograph lower frame due to cover. Therefore, in case of the wedge type cover, the overall lift force changes slightly compared with the cone type cover.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.24-30
• /
• 2016

Sole in the footwear usually modified with foaming agent on the polymer resin to improve the lightweightness and crush-cushion effect. In this study, we investigated rheological properties for polymer resin filled with the different type and concentration of foaming agent, capsule type foaming agent and organo-chemical foaming agent, under the time sweep test. Curing times of each polymer resin with different kind of foaming agent are delayed than reference material (epoxy resin with curing agent). In case of adding capsule type foaming agent, however, there is appropriate concentration to reduce the curing time, relatively. When foaming agent is activated, foaming force inflates the sample in contrast to condensation force of curing and then axial normal force develop to the (+) direction. Interestingly, by increase concentration of foaming agent, there is a specific point to break down the axial normal force development. The reason for this phenomenon is that coalescence of foams induce the blocking of axial normal force development.