DOI QR코드

DOI QR Code

Experimental Study on the Performance of a Bidirectional Hybrid Piezoelectric-Hydraulic Actuator

  • Jin, Xiao Long (Department of Advanced Technology Fusion, Konkuk University) ;
  • Ha, Ngoc San (Department of Advanced Technology Fusion, Konkuk University) ;
  • Li, Yong Zhe (Department of Advanced Technology Fusion, Konkuk University) ;
  • Goo, Nam Seo (Department of Advanced Technology Fusion, Konkuk University) ;
  • Woo, Jangmi (Department of Mechanical Engineering, Sungkyunkwan University) ;
  • Ko, Han Seo (Department of Mechanical Engineering, Sungkyunkwan University) ;
  • Kim, Tae Heun (Firtec. Co.) ;
  • Lee, Chang Seop (Agency for Defense Development)
  • Received : 2015.07.02
  • Accepted : 2015.12.03
  • Published : 2015.12.30

Abstract

The piezoelectric-hydraulic actuator is a hybrid device that consists of a hydraulic pump driven by a piezo-stack coupled to a conventional hydraulic cylinder. The actuator is of compact size, but can produce a moderate energy output. Such hybrid actuators are currently being researched and developed in many industrialized countries due to the requirement for high performance and compact flight systems. In a previous study, we designed and manufactured a unidirectional hybrid actuator. However, the blocking force was not as high as expected. Therefore, in this study, we redesigned the pump chamber and hydraulic cylinder and also improved the system by removing the air bubbles. Two different types of piezo-stacks were used. In order to achieve bidirectional capabilities in the actuator, commercial solenoid valves were used to control the direction of the output cylinder. Experimental testing of the actuator in unidirectional and bidirectional modes was performed to examine performance issues related to driving frequency, bias pressure, reed valve thickness, etc. The results showed that the maximum blocking force was measured as 970.2N when the frequency was 185Hz.

Keywords

References

  1. Konishi, K., Yoshimura, T., Hashimoto, K., and Yamamoto, N., 1993, "Hydraulic Actuators Driven by Piezoelectric Elements 1st Report, Trial Piezoelectric Pump and Its Maximum Power," Trans. Jpn. Soc. Mech. Eng., Ser. C, Vol. 59, No. 564, pp. 2477-2484.
  2. Sirohi, J., Cadou, C. and Chopra, I., "Investigation of the dynamic characteristics of a piezohydraulic actuator", Journal of Intelligent Material Systems and Structures, Vol. 16, No. 6, 2005, pp. 481-492. https://doi.org/10.1177/1045389X05051072
  3. Ellison, J., Investigation of active materials as driving elements in a hydraulic-hybrid actuator, Master Thesis, University of Maryland, College Park, MD, USA, 2004.
  4. Chaudhuri, A., Self-contained hybrid electro-hydraulic actuators using magnetostrictive and electrostrictive materials, PhD Thesis, Department of Aerospace Engineering, University of Maryland, College Park, MD, 2008.
  5. Mauck, L. D. and Lynch, C. S., "Piezoelectric hydraulic pump development", Journal of Intelligent Material Systems and Structures, 2000, pp. 758-764.
  6. John, S., Chaudhuri, A. and Wereley, N. M., "Investigation of the dynamic characteristics of a piezohydraulic actuator", Journal of Intelligent Material Systems and Structures, Vol. 132, No. 2, 2010, pp. 021006-17.
  7. Xuan, Z. F., Jin, T. L., Ha, N. S., Goo, N. S., Kim, T. H., Bae, B. W., Ko, H. S. and Yoon, K. W., "Performance of piezostacks for a piezoelectric hybrid actuator by experiments", Journal of Intelligent Material Systems and Structures, Vol. 21, No, 18, 2014, pp. 2212-2220.
  8. PI 2013 Ceramic Fundamentals of piezoelectric actuators.
  9. Tan, H., Hurst, W. and Leo, D., "Performance modeling of a piezohydraulic actuation system with active valves", Smart materials and structures, Vol. 14, No. 1, 2005, pp. 91-110. https://doi.org/10.1088/0964-1726/14/1/010
  10. Pham, M. and Goo, N. S., "Development of a Peristaltic Micropump with Lightweight Piezo-Composite Actuator Membrane Valves", International Journal of Aeronautical and Space Sicences, Vol.12, No. 1, 2011, pp. 69-77 https://doi.org/10.5139/IJASS.2011.12.1.69
  11. Chaudhuri, A., Yoo, J. H. and Wereley, N. M., "Development of a hybrid magnetostrictive Hydraulic actuator", Smart Materials and Structures 18: 085019, 2009. https://doi.org/10.1088/0964-1726/18/8/085019
  12. William, E. H., Piezohydraulic actuator design and modeling using a lumped-parameter approach, Master Thesis, Diss. Virginia Polytechnic Institute and State University, 2002.
  13. Sirohi, J. and Chopra, I., "Design and development of a high pumping frequency piezoelectric-hydraulic hybrid actuator", Journal of Intelligent Material Systems and Structures, Vol. 14, No. 3, 2003, pp. 135-147. https://doi.org/10.1177/1045389X03014003002
  14. Kim, K., Shin, S., Lee, J., Yee, K. and Oh, S. "Toward a More Complete Analysis for Fluid-Structure Interaction in Helicopters", International Journal of Aeronautical and Space Sicences, Vol. 7, No. 2,2006, pp. 110-146. https://doi.org/10.5139/IJASS.2006.7.2.110
  15. Kim, J. H., Lee, J. W., Park, S. H., Byun, D., Byun, Y. H. and Lee, C. "FSI (Fluid-Structure Interaction) Analysis for Harmonious Operation of High-Speed Printing Machine", International Journal of Aeronautical and Space Sicences, Vol. 9, No. 1, 2008, pp. 137-146. https://doi.org/10.5139/IJASS.2008.9.1.137
  16. Cho, J. H., Goo, N. S., Xuan, Z. F., Yoon, K. W. and Ko, H. S., "Study on flow distribution inside integrated hybrid actuator", Journal of Mechanical Science and Technology, Vol. 28, No. 9, 2014, pp. 3583-3588. https://doi.org/10.1007/s12206-014-0819-6
  17. Blevins, R. D., "Formulas for Natural Frequency and Mode Shape", Journal of Applied Mechanics, Vol. 47, Issue 2, 1980, pp. 461.
  18. Herdic, S. L., Development of piezo-hydraulic actuation systems technology for use on a helicopter tailing edge flap, Master Thesis, Georgia Institute of Technology, Atlanta, GA, 2005.

Cited by

  1. High actuation force of piezoelectric hybrid actuator with multiple piezoelectric pump design vol.28, pp.18, 2017, https://doi.org/10.1177/1045389X17692048