• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.955-960
• /
• 2008

We investigated and estimated at the characteristics of decomposition and mineralization of benomyl using a design of experiment(DOE) based on the general factorial design in an E-beam process, and also the main factors(variables) with benomyl concentration(X$_1$) and E-beam irradiation(X$_2$) which consisted of 5 levels in each factor was set up to estimate the prediction model and the optimization conditions. At frist, the benomyl in all treatment combinations except 17 and 18 trials was almost degraded and the difference in the decomposition of benomyl in the 3 blocks was not significant(p > 0.05, one-way ANOVA). However, the % of benomyl mineralization was 46%(block 1), 36.7%(block 2) and 22%(block 3) and showed the significant difference of the % that between each block(p < 0.05). The linear regression equations of benomyl mineralization in each block were also estimated as followed; block 1(Y$_1$ = 0.024X$_1$ + 34.1(R$^2$ = 0.929)), block 2(Y$_2$ = 0.026X$_2$ + 23.1(R$^2$ = 0.976)) and block 3(Y$_3$ = 0.034X$_3$ + 6.2(R$^2$ = 0.98)). The normality of benomyl mineralization obtained from Anderson-Darling test in all treatment conditions was satisfied(p > 0.05). The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were Y = 39.96 - 9.36X$_1$ + 0.03X$_2$ - 10.67X$_1{^2}$ - 0.001X$_2{^2}$ + 0.011X$_1$X$_2$(R$^2$ = 96.3%, Adjusted R$^2$ = 94.8%) and 57.3% at 0.55 mg/L and 950 Gy, respectively. A Microtox test using V. fischeri showed that the toxicity, expressed as the inhibition(%), was reduced almost completely after an E-beam irradiation, whereas the inhibition(%) for 0.5 mg/L, 1 mg/L and 1.5 mg/L was 10.25%, 20.14% and 26.2% in the initial reactions in the absence of an E-beam illumination.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.1-10
• /
• 2007

Most of natural images have a special property, what is called self-similarity, which is the basis of fractal image coding. Even though an image has local stationarity in several homogeneous regions, it is generally non-stationarysignal, especially in edge region. This is the main reason that poor results are induced in linear techniques. In order to overcome the difficulty we propose a non-linear technique using self-similarity in the image. In our work, an image is classified into stationary and non-stationary region with respect to sample variance. In case of stationary region, do-noising is performed as simply averaging of its neighborhoods. However, if the region is non-stationary region, stationalization is conducted as make a set of center pixels by similarity matching with respect to bMSE(block Mean Square Error). And then do-nosing is performed by Gaussian weighted averaging of center pixels of similar blocks, because the set of center pixels of similar blocks can be regarded as nearly stationary. The true image value is estimated by weighted average of the elements of the set. The experimental results show that our method has better performance and smaller variance than other methods as estimator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.16-23
• /
• 2009

In this paper, we propose a new distributed Alamouti space-time block coding scheme using cooperative relay system composed of one source node, three relay nodes and one destination node. The source node is assumed to be equipped with two antennas which respectively use a 2-beam array to communicate with two nodes selected from the three relay nodes. During the first time slot, the two signals which respectively were transmitted by one antenna at the source, are selected by one relay node, added, amplified, and forwarded to the destination. During the second time slot, the other two relay nodes implement the conjugate and minusconjugate operations to the two received signals, respectively, each in turn is amplified and forwarded to the destination node. This transmission scheme represents a new distributed Alamouti space-time block code that can be constructed at the relay-destination channel. Through an equivalent matrix expression of symbols, we analyze the performance of this proposed space-time block code in terms of the chernoff upper bound pairwise error probability (PEP). In addition, we evaluate the effect of the coefficient $\alpha$ ($0{\leq}{\alpha}{\leq}1$) determined by power allocation between the two antennas at the source on the received signal performance. Through computer simulation, we show that the received signals at the three relays have same variance only when the value of $\alpha$ is equal to $\frac{2}{3}$, as a consequence, a better performance is obtained at the destination. These analysis results show that the proposed scheme outperforms conventional proposed schemes in terms of diversity gain, PEP and the complexity of relay nodes.

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2002

A practical calculation algorithm which calculates the relative output factor(ROF) for irregular shaped electron field has been developed and evaluated the accuracy of the algorithm. The algorithm adapted two-source model, which assumes that the electron dose can be express as sum of the primary source component and the scattered component from the shielding block. Original two-source model has been modified in order to make the algorithm simpler and to reduce the number of parameters needed in the calculation, while the calculation error remains within clinical tolerance range. The primary source is assumed to have Gaussian distribution, while the scattered component follows the inverse square law. Depth and angular dependency of the primary and the scattered are ignored ROF can be calculated with three parameters such as, the effective source distance, the variance of primary source, and the scattering power of the block. The coefficients are obtained from the square shaped-block measurements and the algorithm is confirmed from the rectangular or irregular shaped-fields used in the clinic. The results showed less than 1.0 ％ difference between the calculation and measurements for most cases. None of cases which have bigger than 2.1 ％ have been found. By improving the algorithm for the aperture region which shows the largest error, the algorithm could be practically used in the clinic, since one can acquire the 1011 parameter's with minimum measurements(5∼6 measurements per cones) and generates accurate results within the clinically acceptable range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.317-325
• /
• 2015

In an interference environment, adaptive sidelobe blanking(adaptive SLB: ASB) algorithm effectively cancels the high-duty cycle jammer and blocks the sidelobe signals without the auxiliary antenna. The adaptive SLB for the linearly constrained minimum variance (LCMV) is proposed in this paper. In the proposed scheme, the interference covariance matrix is modified to satisfy the direction constraints of LCMV and the normalized output can be obtained to block sidelobe signals. As the LCMV can be represented as a generalized sidelobe canceller(GSC) form, which is the general framework of various adaptive beamforming(ABF) algorithms, the proposed adaptive SLB can be applied to various ABF methods. The performance of the proposed method is verified through simulation and analysis.

• The Korean Journal of Applied Statistics
• /
• v.19 no.2
• /
• pp.231-240
• /
• 2006

It is well understood that a paired comparison (paired t test) provides better precision than a group comparison (two-sample t test), when the pairing is effective (the variation within a pair is small). However, when the variation among the pairs is sufficiently small, the group comparison is likely to yield a better result. To get a statistical explanation of this, we examine the two methods through an analogy to one-way and two-way analysis of variance. We introduce a new measure, R statistic, which is the ratio of their confidence interval lengths, as a quantitative criterion for comparing the two methods. The distribution of the Rf statistic is described by t and F distribution functions. Through this characterization, we show that the paired comparison can be better than group comparison when the variation among the pairs is statistically significantly large.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1187-1193
• /
• 2014

This paper presents an effective motion estimation to improve the performance of the motion compensated temporal filtering (MCTF) which is a core part of the wavelet-based scalable video coding. The proposed scheme makes the motion vector field uniform by the modified median operation and the search strategies using adjacent motion vectors, in order to enhance the pixel connectivity which is significantly relevant to the performance of the MCTF. Moreover, the motion estimation with variable block sizes that reflects the features of frames is introduced for further correlation improvement of the motion vector field. Experimental results illustrate that the proposed method reduces the decomposed energy on the temporal high frequency subband frame up to 30.33% in terms of variance compared to the case of the full search with fixed block sizes.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.76-85
• /
• 2011

In this paper, we propose a texture feature-based language identification using Gabor feature and wavelet-domain BDIP (block difference of inverse probabilities) and BVLC (block variance of local correlation coefficients) features. In the proposed method, Gabor and wavelet transforms are first applied to a test image. The wavelet subbands are next denoised by Donoho's soft-thresholding. The magnitude operator is then applied to the Gabor image and the BDIP and BVLC operators to the wavelet subbands. Moments for Gabor magnitude image and each subband of BDIP and BVLC are computed and fused into a feature vector. In classification, the WPCA (whitened principal component analysis) classifier, which is usually adopted in the face identification, searches the training feature vector most similar to the test feature vector. Experimental results show that the proposed method yields excellent language identification with rather low feature dimension for a document image DB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1258-1268
• /
• 2004

We propose a new fast, algorithm which is used for detecting frontal face in the frequency domain based on human skin-color using OCT coefficient of dynamic image compression and skin color information. The region where each pixel has a value of skin-color were extracted from U and V value based on DCT coefficient obtained in the process of Image compression using skin-color map in the Y, U, V color space A morphological filter and labeling method are used to eliminate noise in the resulting image We propose the algorithm to detect fastly human face that estimate the directional feature and variance of luminance block of human skin-color Then Extraction of face was completed adaptively on both background have the object analogous to skin-color and background is simple in the proposed algorithm The performance of face detection algorithm is illustrated by some simulation results earned out on various races We confined that a success rate of 94 % was achieved from the experimental results.

• Journal of the Korean Society of Tobacco Science
• /
• v.10 no.2
• /
• pp.117-122
• /
• 1988

This experiment was conducted to study the nature of gene effects for the leaf characters in flue-cured tobacco. The genetic populations were derived from crosses between NC 2326 and Mc Nair 373, and NC 628 and DG-72. The generation means experiment Included the Pl, P2. Fl, F2, Bl and B2, which were frown at Taegu Experiment Station, Korea Ginseng & Tobacco Research Institute in 1984. Seedlings were transplanted to the field in a randomized block design with 3 replications. In each block, parental and Fl Plots contained 15 plants in a single row, F2, Bl and B2 plots being composed of 75 plant, in 5 rows. Leaf characters were measured of largest (middle leaf) and 5th leaf(top leaf) from the top after topping. Measurements of the length and width of leaf were obtained from the fresh the middle and top leaves, and weight of leaf, weight and width of midrib were from the satrap leaf after curing. Estimates of additive and dominance genetic variance were analyzed according to Gamble's biometrical model. The results obtained are as follows: 1. The additive gene effects were significant and larger than the dominance gene effects for all leaf and midrib characters in both stalk positions. 2. The dominance gene effects were significant for the length and width of leaf, and weight of midrib in the middle leaves. 3. The digenic epistatic effects were significant for the length and width of leaf in both stalk positions. 4. The additive gene effects were larger in the top than in the middle leaves and midrib characters.