• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.75-80
• /
• 2017

Permeable block pavement systems are widely used to relieve the flood and enhance water circulation. However, domestic design method has not yet been established well. Although AASHTO 93 flexible pavement design method is applied as a structural design method outside the country, there is a lack of information on layer coefficient of the permeable pavement materials, which makes it difficult to apply the design to various materials. Therefore, in this study, a method of calculating the layer coefficient of permeable block pavement materials by plate load test was presented and the layer coefficient of a permeable block pavement in a testbed was evaluated. Overall, calculated layer coefficient of open graded aggregate and permeable block pavement surface layer were similar to those of the conventional values. The presented method may be used to evaluate layer coefficients of permeable block pavements for design.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.214-221
• /
• 2001

The Great Hall of Incheon International Airport Transportation Center has irregular curved roof structure. The structure consists of 13 main steel trusses. (the longest span of 162m, 480ton) The total weight of the truss is 6,300ton and the whole truss is made of 9,600 pieces which has the joint connected to maximum 13 different parts at one point and Roof Truss is supported by 12 Fabric Foundation. Considering the economical efficiency and the schedule, the Sliding Construction Method was used other than conventional erection method. The roof truss structure was divided into two blocks, 3,550ton and 2,700ton, each block was pre-erected on the Giant Sleigh off the site and was pulled 181m by using Tandem Pulling Jack and Strand to be set in place.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.152-158
• /
• 2014

It is very important to supply the diesel fuel from fuel tank to combustion chamber in case of cold start procedure. the paraffin hydrocarbons are easily solidified at low fuel temperature and it can be blocking the fuel supply to the high pressure fuel pump. In order to reduce the fuel crystallization (Waxing), it have been used to develop not only cold flow additives but also the proper mounting design of fuel filter. Block heater in the fuel filter assembly have been also contained to improve the cold start and prevent blocking the fuel supply in Common Rail Direct Injection System. we can obtain the fuel pressure drop and fuel flow rate, power consumption of fuel heater to have the cold flow evaluation test with the saperated and composited fuel heater at the low ambient temperature, Due to evaluating cold flow performance of two block heater, we knew that composited package fuel heater was the excellent cold flow performance compared to separated type and obtained the parameters of cold flow.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1135-1144
• /
• 2010

The high tech marine transportation infrastructure is an innovative transportation infrastructure that may be able to secure a safe transportation environment as well as efficient operation by connecting up-to-date skills including a broad range of wire and wireless communication-based information, control and electronics technologies. When integrated into the marine transportation infrastructure by the standard requirements, these standard technologies help monitoring and managing navigational aids. This paper defined a concept of middleware in the marine traffic management systems which gives characteristics of system independency, scalability, extensibility, and researches a functionality of the middleware and a software block of the middleware.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.55-63
• /
• 2004

This paper is concerned with the simulator to estimate deformation due to welding of panel blocks. An efficient computer program system has been developed which can be applied to estimation of weld-induced deformation under the given welding conditions. The theoretical background of the present simulator is described with the prediction model for the various type of weld-induced deformation. The developed simulator has been applied to estimation of weld-induced deformation in panel block assembly. This paper ends with some findings from applying the developed simulator.

• International Journal of Computer Science & Network Security
• /
• v.21 no.7
• /
• pp.1-7
• /
• 2021

An amazing growth in the field of Internet of Things (IoT) and Blockchain based smart cities from both industry and academia has been witnessed in the recent years. There are many smart applications such as intelligent transportation, smart banking, improving the life style of citizen, energy consumption and managing the waste in the city, handling home needs are supporting the Smart city concept. These applications are profoundly supported by the advanced technologies like Blockchain as well as IoT in the recent past. Smart cities can be supported by the Blockchain core concepts such as secure, transparent, decentralized and immutable nature. Still, Blockchain and IoT technologies implementation in smart cities are in their early stages and significant research efforts are desirable to integrate them. This review article explores the roles and responsibilities of Blockchain and IoT in building smart cities.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.21-30
• /
• 2021

The existing construction industry is classified into industries with low productivity compared to other industries. In order to solve the decline in productivity in the construction industry, the world is focusing on off-site construction (OSC), which is about 40% more productive than existing construction methods. This high productivity is possible because the three stages of production, transport to the site, and site assembly are consistently maintained in a continuous flow. This study conducted a functional survey through literature review, preliminary field survey, questionnaire, and expert interview. The surveyed function were classified into five categories: convenience, flexibility, manageability, communication, and safety, and the functional characteristics of flexibility, manageability, and communication were high. Because of the change according to the construction progress, the production schedule of the factory, and the variety of transportation time required. Finally, A functional block diagram was developed based on the 15 functions corresponding with an average score of 4 or more in the surveyed function score result. If the OSC transport system is established through this study, It can contribute to a successful construction OSC project and increase productivity.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.47-50
• /
• 2002

선반건조 일정계획에 있어서 탑재 공정은 전체 생산일정 계획 중 선박 한 척에 대한 계획의 시발점이 되며, 병목현상 등을 유발하여 다른 일정에 가장 큰 영향을 주게 되는 공정이다. 최근 많은 조선소에서 하나의 Dock 내에서 두 착 이상의 배를 동시에 건조하는 tandem 방식을 택하고 있어 dock 내의 한정된 Crane 의 개수와 Crane의 Capacity, 공수 등의 자원, 그리고 작업환경에서 일어날 수 있는 여러 가지 변수들을 제대로 고려하지 못 했을 시에는 일정의 차질과 Dock의 회전율을 떨어트리게 한다. 본 논문에서는 가상공간에 하나의 Dock 를 만들어서 일정계획에서 작성한 Network를 사용하여 실제 작업하게 해서 그 Network가 현장에서의 최적한가를 점검하게 하고 현장에서 수정하는 작업을 줄이게 하는 것의 방법으로 simulation을 개발하였다.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.47-57
• /
• 2018

Purpose and Methods: Currently, Korea has the lowest fertility rate among OECD countries. It is also true that from the aspect of encouraging childbirth policy, as the use of automobiles has increased, the interest in securing parking spaces has also become more important. However, there are efforts and researches on the supplying parking spaces for the general public in society not to the positive discrimination such as elders or pregnant women. On the other hand, there is a growing need for a dedicated parking space for pregnant women due to the changing social environment and increasing number of female drivers. At this point, proper design of the maternity parking spaces is essential. Therefore, this study is analyzing the characteristics of pregnant women such as measurements and certain actions and case studies of domestic and oversea. Through the analysis of these factors, the following results were derived. Results: First, it was determined that the important factor in the planning of the parking-block for pregnant women was the human body size of pregnant women. And the required dimensions of movement of pregnant women were derived. Second, the dimensions of automobile were analyzed and applied from the most used vehicles in the family composition. Third, after the observations, the status of the parking spaces of the pregnant women and observations showed that the drivers not only the pregnant women but others were using the spaces improperly. Fourth, at certain conditions of the parking spaces, in order to improve the efficiency of the parking spaces, it is necessarily considered that the usage of designated accessible parking spaces can be used together by not only the disabled but also to the passengers who are classified as 'transportation weak' such as pregnant women. Implications: In this study, the researcher will propose the shape and size of the parking-block for pregnant women considering the elements derived above.

• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.45-59
• /
• 1996

The shortest path algorithm for route guidance is implicitly required not only to support geometrical variations of transportation network such as U-TURN or P-TURN but to efficiency search reasonable routes in searching mechanism. The purpose of this paper is to integrate such two requirements ; that is, to allow U-TURN and P-TURN possibilities and to cut down searching time in locating routes between two points (origin and destination) in networks. We also propose a new type of link searching algorithm which can solve the limitation of vine building algorithm at consecutively left-turn prohibited intersections. The test site is a block of Gangnam road network that has some left-turn prohibited and allowed U-TURN intersections. Four models have been identified to be comparatively analyzed in terms of searching efficiency. The Models are as follows : (i) Model 1 - Link Searching Dijkstra Algorithm without Searching Area Extraction (SAE) ; (ii) Model 2 - Link Searching Dijkstra Algorithm with SAE ; (iii) Model 3 - Link Searching Bidirectional Dijkstra Algorithm without SAE ; and (iv) Model 4 - Link Searching Bidirectional Dijkstra Algorithm with SAE. The results of comparative evaluation show that Model 4 can effectively find optimum path faster than any other models as expected. Some discussions and future research agenda have been presented in the light of dynamic route guidance application of the urban ATIS.