• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.50-55
• /
• 2014

Currently, flat cover glasses are widely applied to mobile devices. However, for a good design and for convenience of use, curved cover glasses are in demand. Thus, many companies are attempting to produce curved cover glasses using a shaving technique, but the production efficiency is very low. Therefore, a molding technique has been adopted to increase the efficiency of curved glass production systems. For a glass molding system, a uniform temperature distribution of the mold is crucial to produce high-quality curved cover glasses. Before setting the heating conditions of the molding system for a uniform temperature distribution by a thermal analysis, verification is required. Therefore, in this study, temperature measurements were conducted for a prototype molding system and the experimental results were compared with simulation computations. The temperatures of the heating block surface were in good agreement with the computational results for transient and steady conditions.

• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.98-105
• /
• 1989

선택적인 주파수 특성을 가지고 있는 인간의 시각 시스템(HVS)을 왈쉬함수로 표현되는 아다마르변환 영역에서 적용하였다. 아다마르 기본함수의 주파수 성분을 구하여 시각 시스템을 모델링하였으며 이때 오차측정의 기준으로서 저 전송율 변환 부호화기에서 중요한 요소인 블록 경계상의 오차와 평균자승 오차를 사용한 결과 인간이 가장 높은 감도를 갖는 공간 주파수는 이산 여현 변환의 경우보다 높게 나타났다. 부호화기에서 HVS 모델을 적용하여 시각적 감도가 높거나 중요한 정보만을 전송하고 북호화기에서는 역하중이 없는 방법을 제시하였다. 블록과 블록이 교차하는 영역에서 특히 크게 나타나는 오차를 감소시키기위해 시각적 하중 방법을 사용하였으며 0.8 bpp이하의 전송율에서 인간의 시각 특성에 만족되는 변환부호화를 시험하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 International Symposium
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• 대한심미치과학회지
• /
• 제17권1호
• /
• pp.23-30
• /
• 2008

Application of CAD/CAM is changing the way partial or full veneer all ceramic restoration is made. CAD/CAM systems, which were used mainly in other industries, have been developed and introduced for the dental purposes recently. It produced a flood of information on the CAD/CAM systems. It also influenced the development of restorative materials and all ceramic is substituting the traditional restorative materials of gold, composite resin and metal. Price increase of gold and other raw materials made the all ceramic more appealing. The introduction of a CEREC 3D system was innovative in several ways. Image of the prepared tooth is captured by camera and impression taking is unnecessary. Restoration can be delivered to the patient on one appointment and it will satisfy the demand of busy patients. One-day treatment with direct CAD/CAM system saves time compared to indirect CAD/CAM system. More superior restoration can be produced if lab work such as the adaptability check and shade selection is cooperated with lab technician. Short working time and comparably superior shade compatibility of color block was close to ideal. In the future, restorations with better quality can be fabricated in less time to busy patients thanks to the development of CAD/CAM system and dental materials.

• 한국컴퓨터정보학회논문지
• /
• 제4권3호
• /
• pp.73-77
• /
• 1999

본 논문은 화상회의를 위한 웨이브렛 변환 부호화에 관하여 연구한 것이다. 먼저, 원영상을 웨이브렛 변환계수의 대역별 특성을 이용하여 다차원의 계층적 피라미드 영상으로 구성하고. 이웃된 프레임 간의 움직임 정보를 구하였다. 그리고. 구해진 움직임 정보를 이용하여 기준 프레임 영상과 상관관계가 적은 프레임 영상에서는 화질을 보장하고, 상관관계가 많은 프레임 영상에서는 전체 동영상의 비트율을 보장하는 픽쳐 셋 필터를 제안하였다. 실험 결과 제안한 방법은 기존의 전영역 탐색 블럭 정합 알고리즘과 차영상 알고리즘에 비해 좋은 성능을 나타냄을 확인하였다.

• 한국통신학회논문지
• /
• 제26권11A호
• /
• pp.1880-1888
• /
• 2001

통신 기술의 발전으로 무선 채널을 이용한 멀티미디어 서비스를 제공하기 위한 방법이 활발히 연구되고 있다. 무선 채널을 이용한 영상 통신에서 채널상의 오류는 복원되는 영상의 화질에 큰 영향을 미친다. 이러한 채널상의 오류로 인한 화질 열화를 막기 위한 다양한 기법들이 활밭히 연구되고 있는데, 그 중 오류 은폐 기법은 부가 정보가 필요 없고 부호화 기법의 변형 없이 적용이 가능하여 최근에 널리 연구되고 있다. 본 논문에서는 동영상 압축 표준안인 H.263에 의해서 압축된 영상이 채널 오류에 의해서 손상되었을 때 주변 블록들의 경계 방향성을 고려해서 손상된 움직임 벡터를 추정하는 새로운 기법을 제안하였다. 이는 각 객체에 속하는 블록들은 유사한 움직임을 갖는다는 특성을 이용한 것으로 방향성을 고려하는데는 각 블록의 첫 번째 AC 계수를 이용하였다. 제안한 방법의 성능을 평가하기 위한 모의 실헙 결과 제안된 방법은 기존의 오류 은폐 방법보다 계산량을 크게 줄이면서 PSNR 측면에서 향상된 결과를 보여준다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권8호
• /
• pp.407-414
• /
• 2004

In this paper, a new gray scale expression method that divides the scan lines into multiple blocks is suggested. The proposed method can drive 16 sub-fields per 1 TV field in the panel with XGA ($1366{\times}768$) resolution. The on and off states of even subfields depend on the condition of odd subfields. The write address mode is used in the odd subfields, while the erase address mode is used in the even subfields. Because the ramp reset pulse is applied every 2 sub-fields, both the contrast ratio and the dynamic voltage margin are sufficiently obtained in comparison with previous AWD (Address While Display) methods. In realizing 16 subfields, shortening the scan time in the erase address period was important. The X bias voltage in the erase address period affected the minimum address voltage but did not the delay time of the address discharge. The delay time of the address discharge was affected by the address voltage and the time interval between the last sustain discharge and the scanning time. We also evaluated the dynamic false contour. New method shows an improved image quality in horizontal moving, but discontinuous lines were observed at the boundaries of each block in vertical moving

• Journal of Information Processing Systems
• /
• 제14권3호
• /
• pp.666-679
• /
• 2018

The discrete wavelet transform (DWT) has good multi-resolution decomposition characteristic and its low frequency component contains the basic information of an image. Based on this, a fragile watermarking using the local binary pattern (LBP) and DWT is proposed for image authentication. In this method, the LBP pattern of low frequency wavelet coefficients is adopted as a feature watermark, and it is inserted into the least significant bit (LSB) of the maximum pixel value in each block of host image. To guarantee the safety of the proposed algorithm, the logistic map is applied to encrypt the watermark. In addition, the locations of the maximum pixel values are stored in advance, which will be used to extract watermark on the receiving side. Due to the use of DWT, the watermarked image generated by the proposed scheme has high visual quality. Compared with other state-of-the-art watermarking methods, experimental results manifest that the proposed algorithm not only has lower watermark payloads, but also achieves good performance in tamper identification and localization for various attacks.

• 한국항행학회논문지
• /
• 제14권6호
• /
• pp.845-850
• /
• 2010

본 논문에서는 MBSFN (Multicast Broadcast Single Frequency Networks)영역에서 비디오 서비스 영역(coverage)을 SVC (Scalable Video Coding)와 계층 차별적 변조 방법을 이용하여 개선시킴을 보였다. 계층적으로 압축된 SVC 비디오 데이터의 각 계층에 따라 변조 방법을 다르게 적용하고, 또한 Raptor FEC (Forward Error Correction)를 이용함으로 기존의 단일계층 AVC (Advanced Video Coding)비디오를 이용하는 것 보다 최소 품질의 서비스 영역을 제공 할 수 있다는 것을 증명 하였다.

• 대한원격탐사학회지
• /
• 제5권1호
• /
• pp.41-56
• /
• 1989

Improvement of the multichannel sea surface temperature(MCSST) software, which had been developed for the purpose of operating under mainframe computer system, was seeked in order to operate effectively in a mini computer system. CPU time and processing time, which is not a major factor under mainframe computer system, become a critical factor in real time image processing under mini computer system. Due to fixed kernel size(3$\times$4) of the old MCSST software, high spatial resolution characteristics of the original image received from satellites were apparently degraded when images are transformed into a cartesian coordinate system after geometrical distortions of the image due to earth curvature are removed. CPU and processing time were reduced to 0.13 and 0.15~0.22 comparing with the old MCSST's, respectively, by applying disk block I/O and M/T queue I/O method under VAX-11/750 computer. The high resolution quality (1.1km in AVHRR) of the processed image was guaranted using 2$\times$2 kernel size and applying moving window techniques without sacrificing CPU and processing time much.