• 제목/요약/키워드: Block control

검색결과 2,035건 처리시간 0.033초

측방가압충전시 Heated Spreader 사용유무가 근관밀폐에 미치는 영향 (INFLUENCE OF HEATED SPREADER ON THE SEALING ABILITY OF LATERAL CONDENSATION)

  • 정원균;홍찬의
    • Restorative Dentistry and Endodontics
    • /
    • 제24권1호
    • /
    • pp.222-232
    • /
    • 1999
  • The purpose of this study was to evaluate the effect of heated spreader on the sealing ability of lateral condensation, compared with regular cold spreader. Forty two extracted human teeth with single canal were randomly placed into 3 experimental groups, and four additional teeth were used as positive and negative controls. Each group was prepared with Ni-Ti Profile #40 using step-down technique and obturated with standardized colored gutta-percha cone by standard(cold) lateral condensation technique, warm lateral condensation technique with Endotec and hot spreader soaked in glass bead sterilizer, each with Sealapex sealer. Control groups were not obturated, but prepared. After 2 days in 2% methylene blue, the teeth were invested and made into transparent resin blocks. And then, each block was sectioned horizontally with microtome at 1, 2, 3, 4, 5 mm levels from the apex. The linear extent of dye penetration was examined with stereomicroscope at ${\times}$20 magnification. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using an analysis of variance(ANOVA) and Scheffe test. The results were as follows ; 1. All experimental groups produced the apical microleakage. 2. The mean leakage was 1.57${\pm}$0.76mm for cold spreader group, 0.86${\pm}$0.95mm for Endotec spreader group, and 0.64${\pm}$0.93mm for hot spreader group. The difference between hot spreader group and cold spreader group was statistically significant(p<0.05). 1. At the 1 mm level, the mean ratio of area of gutta-percha was 74.58${\pm}$13.15(%) for cold spreader group, 65.42${\pm}$14.62(%) for Endotec spreader group, and 80.72${\pm}$14.63(%) for hot spreader group. There was statistically significant difference between hot spreader group and Endotec spreader group(p<0.05). 2. At the 2mm level, the mean ratio of area of gutta-percha was 87.86${\pm}$11.22(%) for cold spreader group, 66.55${\pm}$14.02(%) for Endotec spreader group, and 92.93${\pm}$7.24(%) for hot spreader group. There was statistically significant difference between Endotec spreader group and other two spreader groups(p<0.05). 3. At the level 3, 4, 5 mm, there was no statistically significant difference between each group. Within the limits of the results of this experiment, warm lateral condensation technique with hot spreader soaked in a glass bead sterilizer demonstrated favorable apical sealing effect and improved density of gutta-percha mass. Thus, it is thought that this obturation technique is effective for clinical use and beneficial to reduce condensation forces, also economical and easy. Lateral condensation, Heated spreader, canal sealing, Microleakage.

  • PDF

A Study on Korean Male Cosmetics Analysed Through The Newspaper Articles From 2000 To 2010

  • An, Jin-Kyung;Hong, Na-Young
    • International Journal of Costume and Fashion
    • /
    • 제11권1호
    • /
    • pp.63-83
    • /
    • 2011
  • This study aims to prove the changes, development and social background of Korean male cosmetics over the period of 2000-2010. There were total 574 articles written about male make-up and cosmetics in Chosun Daily, Joongang Daily and Donga Daily, which are the top three Korean local daily newspapers in terms of sales revenue for that period. These articles were analyzed together with social background research from various books and daily newspapers. The analysis of articles was divided into different categories; such as foundation cosmetics, color cosmetics, hair, and the social background. It was found that the articles related to foundation cosmetics were written the most, the articles related to male appearance management were second, articles on other items including how to manage the skin being the least. As for the social background of Korean male cosmetics, first of all, a change in social recognition can be pointed out. The traditional understanding of gender roles has changed, men's appearance management has started to be regarded as a competitive talent, and at the same time, the esthetic viewpoint for men also has changed. One example is the newly made popular term, "flower-handsome man", which shows the new trend of favoring males with nice skin. Second, the expansion of mass culture can be pointed out. As consumers can get information and fashion trends easier and faster, the fashion spreads fast, and this has led to the generalization and popularization of the sense of beauty. Third, the development of scientific technology and medical science can be pointed out. Thanks to the progress in those areas. the extension of youthfulness has become possible and the cosmetics industry was also affected greatly, as shown in the market spread of functional products for anti-ageing and wrinkle control as the interest in anti-ageing has grown. There are benefits from the development of scientific technology, but the problem of environmental pollution has appeared due to machinery and industrialization and thus the issue of well-being has been raised. Rising interest in naturalism, pro-environmentalism and organic cosmetics has influenced the cosmetics industry. In addition, the quantity of ultraviolet rays exposed to our skin has increased due to the air pollution caused by the destruction of environment, leading to increased usage of sun block lotion. Lastly, the influence of consumer society and the expansion of consumerism culture can be pointed out. In the modern society, consumption acts not only as the use of products and services but it also has an important role of mediating individuals with others and the society. The market for male cosmetics has been expanding and the number of men putting on make-up has been increasing rapidly. Therefore, this study is meaningful in that the analysis of the mode of change and the social background are an essential process in order to provide a direction for the future market for male cosmetics.

초음파 근관치료기기의 절삭 및 근관 성형능력에 관한 실험적 연구 (An Experimental Study on the Cutting and Canal Shaping Ability of the Ultrasonic Devices)

  • 노병덕;이승종;박동수;이정석
    • Restorative Dentistry and Endodontics
    • /
    • 제13권1호
    • /
    • pp.91-101
    • /
    • 1988
  • The purpose of this study was to evaluate Ultrasonic devices in root canal enlargement, about the effects on the canal shape and on the cutting ability beyond the curvature in curved canals. 180 resin blocks with $40^{\circ}$ curvature in apical third and 16mm long canal were made of epoxy resin and smooth broaches. These blocks were devided into six groups. According to the devices (ENAC$^{(R)}$, HARMOSONIC$^{(R)}$, Sonic Air MM 3000$^{(R)}$) and files (Zipperer file, H-file, Flexofile, K-file, Sharper file), five groups were instrumented one minute with # 15 files, then the enlarged size was measured. And # 20 files were used again in the same groups, then the enlarged size was measured. In control group, the time which was taken to enlarge the canal from # 15 to # 20 by hand technique was measured. The data was analyzed statistically. Then the enlarged shapes were evaluated in six groups with the stereomicroscope and recorded in ideal and non-ideal canal shape to compare the effects of ultrasonic devices on the canal shape. Only the ideal shaped canals were used in the study whether the cutting ability beyond the curvature in curved canals was, or not. The files with whole flutes, no flutes, and flutes in apical 5mm only were used. The weight differences of pre-and post-instrumentation by Sonic Air MM 3000$^{(R)}$ for two minutes were compared. The results were as follow: 1. Intracanal instrumentation for 1 minute with ultrasonic devices using # 15 and # 20 file in curved root canal of the epoxy resin block can not reach to the next file size. 2. Sonic Air MM 3000$^{(R)}$ shows higher cutting ability than the other two devices (p=0.001), however the percentage of non-ideal canal shape was the highest. 3. Two ultrasonic devices except Sonic Air MM 3000 considered normal in ideal canal shaping ability. 4. little cutting ability was shown beyond the curvature of curved canals.

  • PDF

The Nutritive Value of Mulberry Leaves (Morus alba) and Partial Replacement of Cotton Seed in Rations on the Performance of Growing Vietnamese Cattle

  • Vu, Chi Cuong;Verstegen, M.W.A.;Hendriks, W.H.;Pham, K.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제24권9호
    • /
    • pp.1233-1242
    • /
    • 2011
  • The in vivo digestibility of mulberry leaves (Morus alba) and the effects of the partial replacement of cotton seed with fresh mulberry leaf in rations on the performance of growing Vietnamese cattle was investigated. For the in vivo digestibility trial, twenty castrated rams of Phanrang breed (a local prolific breed) with an initial weight of 23-25 kg, were first assigned to four groups according to weight and then randomly assigned to one of four dietary treatments to determine digestibility of nutrients in mulberry leaves (M. alba), natural Bermuda grass (Cynodon dactylon), elephant grass (Pennisetum purpureum) and buffalo grass (Panicum maximum cv. TD 58). All forages were cut and chopped daily before being offered (at 120% maintenance) to the sheep. In the feeding trial, 20 Laisind (Vietnam yellow cows${\times}$Red Sindhy bulls) crossbred bulls averaged 18 month old and 184 kg were used to investigate the effect of partial replacement of cottonseed in the diet by mulberry leaves on live weight gain and feed conversion rate. The experiment was a randomized complete block design with four levels of fresh mulberry leaves which varied from 0 to 15% of total dietary dry mater and five animals per treatment over an 84 day period. The in vivo digestion trial showed the superior quality of mulberry leaves compared with the grasses. Chemical analysis indicated that mulberry leaves had the highest CP and the lowest NDF contents (22.3 and 31.1% DM, respectively) among the four forages tested. Digestibility of DM and OM of the mulberry leaf (66.4 and 71.8%, respectively) was also the highest but that of CP (58.2%) and NDF (58.4%) was the lowest of the four forages evaluated (p<0.05). Consequently, the ME value and therefore net energy (NE) and unit feed for lactation (UFL) values of the mulberry leaves, which was estimated from chemical composition and digestibility values, were the highest among the forages investigated in the present study. Results of the feeding trial showed no treatment effect on average daily gain (ADG) of the cattle. The values were 554, 583, 565 and 568 g/d for animals in the diets of 0, 5, 10, and 15% mulberry leaves inclusion, respectively. Total DM intake of the animal was not affected by the treatment when expressed as kg/animal/d. However, when adjusted for metabolic weight of the animal the DM intake was reduced (p<0.05) as whole cottonseed was replaced by mulberry leaves in the ration. When the level of mulberry leaves in the ration increased from 5 to 15% of dietary DM at the expense of whole cottonseed, CP and ME intakes of the cattle were significantly decreased (p<0.05) and the feed to gain ratio reduced by 8 to 14% as compared with the control diet (p<0.05). Mulberry leaf is a good feed ingredient for ruminants because of its high level of crude protein and high digestibility of nutrients and energy. Mulberry leaves can be efficiently used as a source of protein supplement to replace cottonseed, a more expensive animal feeds ingredient, in the diet for Vietnamese cattle.

백서 좌골신경에 시행한 박동성 고주파술 (Pulsed Radiofrequency)이 급성 통증과 신경조직에 미치는 영향 (The Analgesic Effect and Its Neuropathologic Changes of Pulsed Radiofrequency Lesions in the Sciatic Nerve of the Rat)

  • 이기헌;신근만;권경석;정배희;임소영;홍순용;최영희;박영의
    • The Korean Journal of Pain
    • /
    • 제13권2호
    • /
    • pp.149-155
    • /
    • 2000
  • Background: Pulsed radiofrequency (RF) lesioning is a painless procedure and causes no neurodestruction and neuritis-like reaction are common following conventional RF lesioning. There is little data about the effect of pulsed RF especially with regard to its suitability for the treatment of acute pain. The possibility of a placebo effect cannot be ruled out because a double-blind study was not performed in previous studies. There is also no neuropathologic study about pulsed RF. Methods: The rats were anesthetized with sodium pentobarbital (40 mg/kg, i.p.; supplemented as necessary). The common sciatic nerve was exposed by blunt dissection through biceps femoris. Pulsed RF was administered to the common sciatic nerve using a 30 ms/s pulse with for 120 seconds. The temperature reached was no more than $42^{\circ}C$. Analgesia was determined using hot-plate assay shortly and, 3 days and 1 week before, and 2 weeks after operation. Lesions were examined with LM (light microscope) and EM (electron microscope) 2 weeks later. Results: There were no differences in response latencies between the control and experimental group. There were many vacuoles with hyaline bodies in the Schwann cell cytoplasm rather than axon in LM and larger electron dense bodies. No changes were found in the axon or unmyelinated fibers. Only small changes were found in the sheaths of myelinated fibers and Schwann cells. Conclusions: We therefore do think that any analgesic effect of pulsed RF is not a result of block of neural conduction. But rather than it can be attributed to others factors. It was also ineffective as a treatment for acute pain such as that caused by the hot-plate test.

  • PDF

계층적 분해 방법과 PCA를 이용한 공장규모 실시간 감시 및 진단 (Plant-wide On-line Monitoring and Diagnosis Based on Hierarchical Decomposition and Principal Component Analysis)

  • 조현우;한종훈
    • 한국가스학회지
    • /
    • 제1권1호
    • /
    • pp.27-32
    • /
    • 1997
  • 화학 공정을 계속적으로 감시함으로써 공정의 이상이 장치의 고장 또는 폭발에 이르지 않도록 조기에 이상을 감시하는 기술은 공장 조업의 안정성과 생산성의 측면에서 볼 때 매우 중요하다 최근, DCS와 같은 공정 정보 시스템이 널리 보급됨에 따라서 방대한 양의 데이터들을 해석해서 실시간으로 공정을 감시하고 진단할 수 있는 기반이 마련되었다. 본 연구에서는 계층적 분해 기법과 PCA에 기반을 둔 공장 규모의 실시간 감시 기법을 제안한다. 대형 공정을 효율적으로 모니터링 하기 위하여 전체 공정은 몇 개의 군으로 나뉘며 또한 이 군은 다시 몇 개의 하위 군으로 세분하게 된다. 이렇게 전체 공정을 분해하여 계층적인 공정 모델을 구성함으로써, 전체 공정의 조업 상황을 감시할 수 있을 뿐만 아니라 이상이 발생했을 시에는 하위 계층의 조업 상황을 고려하여 보다 자세한 이상 원인을 진단할 수 있다. 또한 각 세부 단위 공정들에 대한 조업 정보를 포함하고 있는 하위 모델들과 전체 조업 전반에 관한 정보를 지닌 전체 모델을 통하여 공정 이상을 조기에 감시함으로써 이상이 전파를 방지할 수 있다. 이러한 실시간 감시 및 진단 기법을 구현학 Idnl하여 기존의 SPC와 다변량 통계 기법의 하나인 PCA를 적용하였으며, 제안한 방법의 감시 및 진단 성능을 평가하기 위하여 41개의 측정 변수를 가진 Tennessee Eastman 공정에 대하여 전산 모사를 수행하였다. 세 가지 경우에 대하여 적용한 결과들은 이상의 신속한 감지와 믿을만한 원인 진단 능력을 보여 주었다.

  • PDF

공간 및 언어 과제 수행 시 소뇌의 편측화에 관한 뇌 기능 연구 (An fMRI study on the cerebellar lateralization during visuospatial and verbal tasks)

  • 정순철;손진훈;최미현;이수정;양재웅;이법이
    • 감성과학
    • /
    • 제12권4호
    • /
    • pp.425-432
    • /
    • 2009
  • 본 연구에서는 공간 및 언어 과제를 수행하게 하면서 뇌 기능 영상을 획득하여, 각 인지 과제 수행에 따른 소뇌 활성화 영역을 알아보고, 소뇌 편측화의 차이를 규명하고자 한다. 8명의 오른손잡이 남자 대학생(평균 $21.5{\pm}2.3$세)과 8명의 오른손잡이 남자 대학생(평균 $23.3{\pm}0.5$세)이 각각 공간 및 언어 과제 실험에 참여하였다. 3T MRI 에서 single-shot EPI 기법을 이용하여 뇌 기능 영상을 획득하였다. 뇌 기능 영상 데이터는 SPM-99 S/W 를 사용하여 분석하였다. 실험은 네 개의 블록으로 구성되며, 각 블록은 통제과제(1분), 인지 과제(1분)을 포함하며, 한 실험당 소요시간은 블록당 2분씩, 총 8분이었다. 감산법을 이용하여 공간 및 언어 과제에 대한 소뇌 활성화 영역을 알아보았고, 소뇌의 활성화 voxel 수를 이용하여 소뇌의 편측화 지수를 계산하였다. 두 인지 과제 수행 시 활성화된 소뇌 영역은 선행 연구와 비교하여 유사한 영역이었다. 두 인지 과제 모두 좌, 우소뇌 반구의 활성화 voxel 수가 비슷하여 소뇌 기능의 편측화가 나타나지 않았다.

  • PDF

3D CAD 모델 기반 해양플랜트 배관 공정 모니터링 시스템 개발 (A Development of Offshore plant Piping Process Monitoring System Based on 3D CAD Model)

  • 김현철;이규홍
    • 한국산학기술학회논문지
    • /
    • 제21권2호
    • /
    • pp.58-65
    • /
    • 2020
  • 3D CAD 시스템으로 설계된 해양플랜트 배관재 모델들은 2D 배관 제작도와 설치도의 형태로 생산 공정에 제공되고, 기본 엔지니어링 정보와 함께 통합 공정관리시스템에서 원자재의 구매, 조달, 제작, 설치 및 검사가 체계적으로 관리되어 진행된다. 기존의 통합 공정관리시스템은 자원의 흐름 및 진행 상황을 체계적으로 관리하여 공정 시수 절감에 많은 기여를 하고 있지만, 3D 설계 형상 모델 정보를 포함하고 있지 않기 때문에 배관 설치 작업 전에 복잡한 배관 구조를 파악하거나, 잦은 설계 변경으로 인해 연관된 도면을 찾을 때 상호간 신속한 정보 교류가 어려운 단점을 가지고 있었다. 이러한 문제점을 해결하기 위해 3D 모델을 기반으로 하는 해양플랜트 배관 공정 모니터링 시스템을 개발하였다. 본 시스템은 3D 모델 기반 배관 모니터링 시스템은 Visual Studio 2017 C#과 UNITY3D를 기반으로 배관 공정 작업 정보가 3D CAD 모델과 실시간 연동될 수 있도록 구성하였다. 그리고 블록, 크기, 재료에 따른 배관 설치 공정 진행 흐름 뿐만 아니라, 청소, 수압검사, 공압검사 등 기능 검사 항목별 진행 흐름을 3D 모델상에서 실시간으로 확인할 수 있도록 하였다. 작업자는 개발된 시스템을 통해 생산 현장에서 실시간으로 배관 공정 진행 흐름을 포함한 3D CAD 모델을 쉽게 파악함으로써 작업 효율성 향상에 많은 기여를 할 것으로 기대된다.

Milk Conjugated Linoleic Acid (CLA) Profile and Metabolic Responses of Dairy Cows Fed with High-temperature-micro-time (HTMT) Treated Diets Containing High Quantity Extruded Soybean (ESB)

  • Lee, H.G.;Hong, Z.S.;Wang, J.H.;Xu, C.X.;Jin, Y.C.;Kim, T.K.;Kim, Y.J.;Song, M.K.;Choi, Yun.-Jaei
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권11호
    • /
    • pp.1504-1512
    • /
    • 2009
  • A feeding trial was conducted to examine the effect of high-temperature-micro-time (HTMT) processing of diets containing extruded soybean (ESB) in high quantity on milk fat production, metabolic responses, and the formation of conjugated linoleic acid (CLA) and trans-vaccenic acid (TVA). Twenty-one multiparous Holstein cows in mid-lactation were blocked according to milk yield in the previous lactation. Cows within each block were randomly assigned to either normal concentrate or HTMT treated diets containing ESB (7.5% HTMT-ESB and 15% HTMT-ESB). It was hypothesized that the HTMT-ESB would affect the undegradable fatty acids in the rumen and, thus, would modify the fatty acid profile of milk fat. Both 7.5% and 15% HTMT-ESB did not affect milk yield, fat, protein, lactose and solid-not-fat (SNF), but the proportion of cis-9, trans-11 CLA in milk fat was significantly increased by these treatments. Content of TVA in milk fat was not affected by HTMT-ESB. The HTMT-ESB influenced the fatty acid profile in milk fat, but there was little difference between 7.5% and 15% of supplementation. HTMT-ESB feeding significantly decreased the concentration of plasma insulin and glucose, while plasma growth hormone (GH), triglyceride (TG), non-esterified fatty acid (NEFA) and HDLcholesterol were increased by 7.5% and 15% ESB-HTMT supplementation in comparison to the control group (p<0.05). However, no significant difference was observed in plasma LDL-cholesterol, insulin like growth factor (IGF)-1, T3, T4, and leptin concentrations among treatments (p>0.05). The present results showed that cis-9, trans-11 CLA production was increased by HTMT treatment of dietary ESB without reduction of milk fat, and the unchanged milk fat and yield was assumed to be associated with the constant level of thyroid hormones, leptin, and IGF-1.

체외에서 돼지 정자-난자의 상호작용시 투명대내 Lectin 결합 (Binding of Lectins to the Zona Pellucida on Sperm-oocytes Interaction in the Pig)

  • 황인선;김정익;정희태;양부근;박춘근
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제29권3호
    • /
    • pp.179-186
    • /
    • 2002
  • Objective: Lectins are cell-agglutinating and sugar specific proteins or glycoproteins of non-immune origin that precipitate glycoconjugates having saccharides of appropriate complementarity. Because of these properties, plant lectins have been used to help characterize the carbohydrate moieties of glycoproteins in the zona pellucida (ZP) of several mammalian species including pigs. Treatment of oocytes with various lectins blocks sperm binding to the ZP in various mammalian species. This study was undertaken to examine the distribution of sugar residues in the ZP of pig oocytes matured in vitro and the ability of spermatozoa to bind to ZP and in vitro penetration in oocytes treated with fluorescein isothiocyanate (FITC)-labelled lectins. Materials and Methods: The lectins of Banderiaea simplicifolia (BS-II, bind to $\beta$-D-N-acetylglucosamine), Canavalin ensiformis (Con A, bind to $\alpha$-D-Mannose), Lens culinaris (LCA, bind to a-D-Mannose), Ricinus communis (RCA-I, bind to $\beta$-D-Galactose) and Ulex europaeus (UEA-I, bind to $\alpha$-L-Fucose) were examined for spermatozoa penetration, binding capacity to ZP and distribution of lectins. Results: The penetration rates were significantry (p<0.05) higher in control oocytes (63%) than those treated with all lectins, but penetration rates ($40{\sim}49%$) were simililar in group treated with lectins. The incidence of monospermy was similar in oocytes untreated and UEA-I, but it was higher in oocytes treated with BS-II, Con A, RCA-I and LCA. The porcine oocytes cultured for 48 h in TC-199 medium were freed from cumulus cells and treated for 30 min with fluorescein isothiocyanate-labelled lectins. When examined under fluorescein illumination, higher (p<0.001) proportions of oocytes showed fluorescein of zona pellucida after treatment with Con A (93%), LCA (93%) and RCA-I (100%) than BS-II (37%) and UEA-I (50%). All of the oocytes treated with RCA-I exhibited strong fluorescein in the outer region of the zona pellucida while those treated with LCA exhibited strong fluorescein throughout the zona pellucida. BS-II bounded mainly to the outer region and UEA-I bounded mainly to the inner region of the zona pellucida, with either strong or weak fluorescein. At 120 min after insemination in vitro, fewer spermatozoa were bound to the zona pellucida of the oocytes treated with BS-II, Con-A and RCA-I. Of the lectins, Con A most inhibited sperm binding. Conclusions: These results suggest that $\beta$-D-Galactose residues in the porcine zona pellucida may act as primary sperm receptors and inducers of the sperm acrosome reaction and these sugar residues may be involved in the block to polyspermy.