• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.415-422
• /
• 2010

This paper proposes service-oriented composition and verification techniques for incrementally extracting high-level abstract behavior of unit components in a systematic manner. Proposed techniques include the definition for abstract component, which is a basic building-block of the abstraction process, an algorithm for port-based synchronized abstraction, and projection abstraction. A verification framework is developed using the proposed techniques and its efficiency is demonstrated through a case example.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.2
• /
• pp.231-237
• /
• 1994

Three concentrations of P (0.33, 0.43 and 0.54%) and two concentrations of Ca (0.60 and 0.97%) in ration dry matter were evaluated for effects on dry matter intake and on milk yield and composition using 24 Holstein cows. Cows were arranged in a $3{\times}2$ factorial experiment as an incomplete randomized block design with three 28-day periods. Each cow consumed at least one ration with each concentration of Ca. Dry matter intake, yield of 3.5% Fat Corrected Milk, and milk composition were not affected by concentration of P, but milk yield was greater when lowest concentration of P was fed (22.8 vs. 22.1 kg/day; p<0.07). Cows fed rations containing 0.60% Ca had greater milk (22.7 vs. 21.9 kg/day; p<0.02) and 3.5% Fat Corrected Milk yields (p<0.03) and slightly greater protein content than when fed 0.97% Ca. Dietary Ca:P ratios between 1.1:1 and 2.9:1 had no effect on dry matter intake, milk yield, or composition. Concentrations of P in plasma were within the normal range for all rations. Because cows had high dry matter intake, mean daily intakes of both P and Ca were greater than required for their level of milk yield.

• Journal of the Korean housing association
• /
• v.24 no.5
• /
• pp.57-67
• /
• 2013

The purpose of this study is to find out distributional principles of the shop-houses in residential district through physical composition of residential area. Through the research that are based on literature and field survey, it analysed the relation between physical composition of residential area and the shop-houses of selected four sites under similar urban condition where land readjustment project were held. The consequences of this study are summarized as follows; 1) A road that is not penetrating the inside a residential area is seemed to have low occupancy of shops comparing to other roads with similar hierarchy. And the shops functions as convenience facilities. It can be inferred from the statement above that even a road with higher hierarchy is not easy to form commercial area if without penetrating the residential area. 2) According to the size and the arranged method of Inner blocks of residential area towards major roads, distribution of shop-houses appear to be different. In other words, when shop-houses are located along the roads, the proportion of shop was higher than when located perpendicular to the roads. 3) When the number of average lots are little and the size of block is small, usually, street ratio and the number of corners gets higher, which eventually increases the number of shop-houses.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.249-254
• /
• 1997

ABA-type block copolymers composed of poly(L-leucine)(PLL) as the A component and poly(ethylene glycol)(PEG) as the B component were synthesized by ring-opening polymerization of L-leucine N-carboxyanhydride initiated by primary amino group located at both ends of PEG chain. A silver sulfadiazine(AgSD)-impregnated wound dressing of sponge-type was prepared by the lyophilization method. Morphological structure of this wound dressing obtained by scanning electron microscopy(SEM) was composed of a dense skin layer and a macroporous inner sponge layer. Equilibrium water content(EWC) of wound dressing was above 10%. It increased with an increased of PEO content in the block copolymer due to the hydrophilicity of PEO. AgSD release from AgSD- impregnated wound dressing in PBS buffer(pH=7.4) was dependent on PEG composition in the block copolymer. Therefore, EWC and release of AgSD can be control by PEG composition. Antibacterial capacity of AgSD-impregnated wound dressing was examined in agar plate against Pseudmonas aeruginosa and Stapplococus aruous. Cytotoxicity of the wound dressing was evaluated by studing mouse skin fibroblast(L929). From the behavior of antimicrobial releasing and the investigation of the suppression of bacterial proliferation, it was supposed that the wound dressing containing antibiotics could protect the wound surfaces from bacterial invasion to suppress the bacterial proliferation effectively. In cytotoxicity observation, cellular damage was reduced by the control led released of AgSD from the LEL sponge matrix of AgSD-medicated wound dressing. In vivo test, granulous tissue formation and wound contraction or the AgSD and DHEA impregnated wound dressing were aster than any other groups.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.104-110
• /
• 2012

The dispersion of pigment particles is important because it is capable of increasing the color strength, contrast, and transmittance of color-LCD products. Pigment dispersion properties are very important factors for the quality of LCD color filters. The chemical structure of polymeric dispersants for pigment is important to improve dispersion stability and prevent aggregation or flocculation of pigment in organic or aqueous systems. Polymeric dispersants should contain both anchoring group that interacts with pigment surface and stabilizing group that provides steric stabilization. Moreover, the molecular weight and composition of block copolymer have the an effect on pigment dispersion. In this study, adequate dispersants, block copolymers containing (2-dimethylamino)ethyl methacrylate as anchoring group and oligo(ethylene oxide)methyl ether methacrylate as a stabilizing group were designed and synthesized by atom transfer radical polymerization in order to prepare well-defined structure, molecular weight and composition.

• Journal of Adhesion and Interface
• /
• v.9 no.4
• /
• pp.30-33
• /
• 2008

Two polymeric interfaces with single component homo-polymers were prepared to control the orientation of block copolymer thin-film nanostructures. Poly(4-acetoxy styrene) (OH-PAS) and poly(4-methoxy styrene) (OH-PMS) which have the average chemical composition of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) were precisely synthesized through nitroxide-mediated radical polymerization. After dehydration reactions between above polymers and SiOx layers of silicon wafers, the polymer-modified interface induced partial (30%) vertical orientation of PS-b-PMMA thin film in the case of OH-PMS and wholly parallel orientation in the case of OH-PAS. Chemical compositions of polymeric interface layers are regarded as the key parameter to control the orientation of nanostructures of block copolymer thin film.

• Membrane Journal
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2019

Poly(ether block amide) (PEBA) is one of the commercially important class of block copolymer very much suitable specifically for $CO_2$ separation. Gas separation membrane need to have good mechanical strength as well as high gas permeability. The crystalline polyamide (PA) block provides the mechanical strength while the rubbery polyether (PE) group being $CO_2$-philic facilitate $CO_2$ permeation though the membrane. Composition of thermoplastic and rubbery phase in the polymer are changed to fit into suitable gas separation application. Although PEBA has good permeability, the selectivity of the membrane can be enhanced by incorporating molecular sieve without affection much the gas permeability. Mixed matrix membrane (MMM), a class of composite membrane combine the advantage of polymer matrix with the inorganic fillers. However, there are some disadvantages based on the compatibility of the inorganic fillers and polymeric phase. This review covers both the advantage and limitations of PEBA block copolymer based composite membrane.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.287-295
• /
• 2020

The purpose of this study is to find out the tendency and meaning of metaphors for block play. For this purpose, responses from 165 teachers in J area day care centers were collected using sentence completion metaphors. Collected data were analyzed through a categorization process using a qualitative research method based on previous research into metaphor analysis. From the results, first, block play trends from the metaphors were classified into two categories: content of block play, and characteristics of block play. The frequency in the order for Building Value of Play was higher. For the content of block play, composition had the highest frequency for trait of block play, and the basis of growth and development had the highest frequency in the Value of Block Play category. Second, the meanings of block play metaphors are composing, expressing, imagining, pleasure, freedom, and value of block play under Category Play, which was recognized as the basis of development, emotional development, social development, and creativity. Based on the results of the study, the value and role of block play in early childhood teacher education and in-service education should be further emphasized.

• Journal of architectural history
• /
• v.11 no.2 s.30
• /
• pp.23-35
• /
• 2002

Even though there have been greate changes in the types and contents of the housing plan in Korea since the Modem age, it seems that the identity of traditional dwelling culture is still remains within it. The purpose of this study is to examine the characteristics and features in the development of the 'Public Standard' Housing Unit Plan by comparing the differences and similarities in unit plans in housings built on Japanese occupation period and those built after the period. From the study, we can conclude as follows: 1. The public standard housing unit plans on both periods have shown the common features in the composition of their physical forms in the way that the front-row area still remains the traditional housing culture and the rear-row area reflects the desires of the modem lives. The structure of the dual-row unit plan appeared in the public standard housing plan was caused by the cultural acculturation in Japanese occupation period. 2. The public standard housing unit plans, however, show the differences in the contents and meaning in units plans with the them of the Japanese housing because of the cultural differences. These differences took placed autonomously through the change of housing plans in the modern time, and have the common features such that 1) the changes in the Maru-centered plan type differ in composition from the inner-corridor plan type used Japanese housing, and 2) the composition of the open-inner spaces in the double-row housing plan reflects the single-row outer open space In the traditional housing. All of these cultural progresses in the public standard housing unit plans was took place as the result of the inner-oriented and notional circulations derived from the modernity. However, the transformed unit plans still contains the identity derived from the variation of the traditional Korean building elements such as Maru and Ondol. In other words, those are the Maru-centered and composed housing plans with juxtaposition of the inner block and the outer block. As the conclusion, though the public standard dwelling unit plan has the similarity in the physical form, it is different in the cultural Identity and meaning from the public standard plans before the independence from the Japan occupation.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.127-133
• /
• 2004

We have studied the surface micelle formation of polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP) at the air-water interface. A series of four PS-b-P2VPs were synthesized by anionic polymerization, keeping the PS block length constant (28 kg/㏖) and varying the P2VP block length (1, 11, 28, or 59 kg/㏖). The surface pressure-area ($\pi$-A) isotherms were measured and the surface morphology was studied by atomic force microscopy (AFM) after Langmuir-Blodgett film deposition onto silicon wafers. At low surface pressure, the hydrophobic PS blocks aggregate to form pancake-like micelle cores and the hydrophilic P2VP block chains spread on the water surface to form a corona-like monolayer. The surface area occupied by a block copolymer is proportional to the molecular weight of the P2VP block and identical to the surface area occupied by a homo-P2VP. It indicates that the entire surface is covered by the P2VP monolayer and the PS micelle cores lie on the P2VP monolayer. As the surface pressure is increased, the $\pi$-A isotherm shows a transition region where the surface pressure does not change much with the film compression. In this transition region, which displays high compressibility, the P2VP blocks restructure from the monolayer and spread at the air-water interface. After the transition, the Langmuir film becomes much less compressible. In this high-surface-pressure regime, the PS cores cover practically the entire surface area, as observed by AFM and the limiting area of the film. All the diblock copolymers formed circular micelles, except for the block copolymer having a very short P2VP block (1 kg/㏖), which formed large, non-uniform PS aggregates. By mixing with the block copolymer having a longer P2VP block (11 kg/㏖), we observed rod-shaped micelles, which indicates that the morphology of the surfaces micelles can be controlled by adjusting the average composition of block copolymers.