• KIEAE Journal
• /
• 제12권3호
• /
• pp.95-100
• /
• 2012

Thermal phenomena has caused abnormal weather phenomena due to the lack of urban green spaces To solve these problems, the country of recorded a city business is actively evolving trends. but in all the land, most built-up city's green buildings unless the demolition of the composition is an impossible situation, green space in urban areas, with emphasis on composition. In this study, thermal power plants that occured in the evolution of vegetation by utilizing Bottom Ash was tried to develop a lightweight block. Bottom Ash block to take advantage of vegetation is focused create green space in urban areas Vegetation in the block was carried out manufacturing lightweight, porous, lightweight water ratio suitable for three types of blocks selected according to its kind study on the manufacturing and process. Bottom Ash from this study at the time of disposal of coal ash generated by recycling the landfill shortages, loss of landfill costs, environmental pollution and are trying to solve the same problem at the same time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권3호
• /
• pp.377-381
• /
• 1993

Twenty male crossbred ($Sahiwal{\times}HF$) calves of about 6-9 months of age were divided into four groups of five animals each. All the animals were offered wheat straw ad lib. As the basal feed. However, animals in group I were fed concentrate mixture while the animals in groups II, III and IV had free access to urea molasses mineral block (UMMB) lick (I), (II) and (III) respectively as a partial substitute of concentrate mixture. The average concentrate offered (kg/day) to the animals was significantly (p<0.01) higher in group I ($2.69{\pm}0.18$) compared to groups II ($1.76{\pm}0.15$), III ($1.70{\pm}0.06$) and IV ($1.65{\pm}0.12$). The UMMB lick consumed was non-significantly different amongst groups I ($535.40{\pm}38.14$), II ($525.60{\pm}31.82$), III ($551.00{\pm}38.49$) and IV ($548.80{\pm}45.46$). Except ether extract, the digestibility coefficients of CP, ADF and NDF were non-significantly different in different groups. Similarly, N balance (g/day) and percent N retention of intake was not affected in different groups on supplementation of UMMB lick. Body composition of animals was similar in different groups supplemented with either concentrate mixture or concentrate mixture and UMMB licks. It may be concluded from these studies that UMMB lick can partially replace the concentrate mixture in the diet of growing calves without affecting the growth rate, nutrient utilization and body composition. The UMMB lick, thus, can form a part of the ration economically in the diet of growing ruminants especially in developing countries.

• 한국생활과학회지
• /
• 제13권2호
• /
• pp.225-235
• /
• 2004

The purpose of this study was to evaluate and to analyze the spatial composition by block plan of the free elderly facility and to provide basic information for building up the detail architectural guidelines. The results of the study were as follows: Elderly welfare law needed to control the poor physical environments of the free elderly facility such as the residential space for more than 4 individuals. The facility of single building type should strengthen the informal support networks through the dispersion of public spaces or should encourage moving of the residents through the outdoor space, especially in rural area. On the other hand, the linking type needed to focus on the administrative spaces on the first floor for the managerial convenience, and to group and disperse the public/recreational spaces to decrease the unnecessary moving of the residents and staffs. The passageway linking building to building should directly connect each administrative space or public space so that elderly used them without any inconvenience. In the dispersion type, which is suited to rural area, the lounge, dining hall, and the place for the staff on duty should be located in the same as the residence building for the convenience and the safety of the elderly residents.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.437-445
• /
• 2017

Distribution and composition of the seabed litters in the exclusive economic zone of the West Sea of South Korea including 18 sea-blocks were investigated using a bottom trawl gear of the R/V Tamgtu 20 (National Institute of Fisheries Science) from 24th April 2011 to 4th May 2012. Each trawl shot was conducted for an hour in each sea-block and the total trawl shots was 18. As a result, 325.6 kg of seabed litter in total has been collected. The quantity of the seabed litter was highest at No. 202 of the sea-block, close to the Heuksan-Do. The highest occupied sea material was plastic (83.1% of entire seabed litters), the second highest material was metal combined with plastic (10.6%), and glass (2.9%), metals (2.3%), vinyl (0.6%), cloth (0.4%) and wood (0.2%) in order. The origin of seabed litters was from fishing gear (89.0% of all seabed litters). Therefore, it could be assumed that most seabed litters were derived from the fishing activity for example fishing nets and ropes.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.128-131
• /
• 2003

Triblock copolymers of poly(dimethylsiloxane) (PDMS) middle block and degradable polyester end blocks were synthesized by the ring open polymerization initialed by alcohol groups of PDMS. Surface composition of the triblock copolymers is measured by angle-dependent electron spectroscopy for chemical analysis. The PDMS blocks are segregated in the topmost surface region and constituted up to 90 mol% of the surface, even though the overall bulk PDMS concentrations of the block copolymers is 6% or less. This result suggests that the bulk property of degradable polyesters is essentially unchanged due to the high surface segregation of PDMS.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.258-261
• /
• 2005

In this paper, experimental and numerical attempts are made fur application of powder metallurgy forming technology to making the cylinder block of a hydraulic pump of which height reaches nearly 70 mm and is ten times larger than the wall thickness. Leak tests with several compositions are carried out in order to find allowable powder composition to prevent leak under high pressure in service and CAE techniques are applied to finding proper process conditions. Through the research, the possibility of the powder formed cylinder block that is very competitive from the point of both cost and mass production has been shown, even though its thickness exceeds the recommended limit considering heterogeneous density distribution caused by the friction between a powder compact and dies.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.99-100
• /
• 2006

Orthogonally protected block copolymers of based on p-hydroxystyrene were prepared with high control via nitroxy mediated radical polymerization using an alkoxyamine as an unimolecular initiator. Thin films of partially protected block copolymer were prepared by spin or dip coating. A well defined nanostructure could be observed as a result of phase separation e.g. cylinders in a matrix oriented perpendicular or parallel to the substrate. The nanostructure of the polymeric films can be defined by the block copolymer composition and it determines surface properties and allows further, selective functionalization, e.g. via click chemistry. The thin films can be designed in a way to allow a patterning based on a thermal or photochemical stimulus.

• 폴리머
• /
• 제32권5호
• /
• pp.465-469
• /
• 2008

블록 공중합체의 자기조립현상과 졸-겔 공정을 결합하여 나노크기 수준에서 다양한 형태를 발현하는 블록공중합체-이산화티타늄 하이브리드 박막의 모폴로지를 제조하였다. 모폴로지 변화를 일으키는 요소로서 블록 공중합체의 조성, 용매의 선택성과 첨가제에 의한 영향을 고려하였으며, 모폴로지 변화에 따른 이산화티타늄의 발광 효율 변화 또한 확인하였다. 폴리스티렌-폴리4비닐피리딘 이중블록공중합체는 용매와 두 블록간의 상대적인 친화성에 따라 미셀과 나노선 형태로 자기조립이 가능하며, 이산화티타늄의 전구체인 티타늄 테트라아이소프로폭시드는 폴리4비닐피리딘블록의 질소 원소와 결합한다. 블록 공중합체/졸-겔 전구체 혼합 용액에 제3의 성분인 3-펜타데실페놀을 첨가하면 블록의 상대적인 부피 비율의 변화를 야기하여 모폴로지 변화를 일으킨다. 다양하게 변화하는 모폴로지에서 이산화 티타늄의 형광 효율이 변화함을 확인하였다.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.8-13
• /
• 2002

The effect of block sequence on the self-assembly of ABC-type triblock copolymers in the ordered state is investigated using an isothermal-isobaric molecular dynamics simulation. The block sequence has an important effect ,on the ]norphology of ABC triblock copolymers. Different morphologies are observed depending on the block sequence as well as the block composition. The triblock copolymers with the volume fraction of 1 : 1 : 1 ($f_A$=$f_B$=$f_C$= 0.33) show the three phase and four layered lamellar structures irrespective of the block sequence. The $A_{32}$$B_{16}$$C_{32}$triblock copolymer with $f_B$=0.2 shows a morphology In which cylinders of midblock B are formed at the interface between A and C lamellae, whereas the morphology of triblock copolymer $B_{16}$$C_{32}$ $A_{32}$ and $C_{32}$ $A_{32}$ $B_{16}$ show a cylindrical core-shell structure and a lamellar type morphology, respectively. The $A_{20}$$B_{40}$$C_{20}$the triblock copolymer with the block B as a major component shows a tricontinuous structure, whereas both $B_{40}$$C_{20}$$A_{20}$ and $C_{20}$$A_{20}$$B_{40}$ triblock coolymers exhibit the lamellar structures. When the block B has larger volrome fraction with $f_B$=0.75, the matrix is composed of block B, and other two blocks A and C form spherical domains.

• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.214-219
• /
• 2017

본 연구에서는 블록공중합체의 자기조립(Self-assembly) 성질과 상전이를 통한 비대칭의 다공성 구조를 형성하는 NIPS 기술을 결합한 SNIPS (Self-assembly and non-solvent induced phase separation) 공정을 이용하여 PS-b-P4VP 블록공중합체 분리막을 제조하였다. 기존의 연구는 단순히 원하는 구조 구현에만 집중되었고 SNIPS 공정상의 내재 변수(농도, 증발시간, 용매의 조성, 습도)들에 대한 체계적인 연구는 보고되지 않았다. 본 연구에서는 PS-b-P4VP 와 DMF, 1,4-Dioxane, THF, DI를 이용해 내재 변수의 영향을 정성적으로 분석하였다. 그 결과, 용액의 농도와 휘발성 용매의 비율이 적당하고 습도가 낮은 환경에서 모폴로지가 최적화 되었으며, PS-b-P4VP 분리막은 표면에 잘 구현된 실린더 구조가 형성되었고 75%의 높은 기공도와 약 18%의 표면 기공도를 가지는 것을 확인하였다.