• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1663-1668
• /
• 2017

A BLDC motor with higher number of phases has several advantages, compared to the conventional three-phase BLDC motors. It can reduce the commutation torque ripple and the iron loss without increasing the voltage per phase and increase the reliability and power density. Higher number of phases increase the torque-per-ampere ratio for the same machine volume and output power by widening the electrical conduction period. In this paper, the proposed seven-phase BLDC motor drive system is made into several functional modular blocks, so that it can be easily extended to other ac motor applications: back-EMF block, hysteresis current control block, pwm inverter block, phase current block, and speed/torque control block. Also in a system of BLDC motor drive, the PI controller has been widely used in the speed controller because of the simple implementation. To obtain a good speed response in a general drive system using the PI controller, the high bandwidth of a controller is established. therefore, in this paper, a Fuzzy controller is applied to the 7-phase BLDC motor drive system in order to improve the speed control performance. The Fuzzy controller is compared with a conventional PI controller through the experiment with respect to speed dynamic responses. These experimental results show that the Fuzzy controller of the 7-phase BLDC motor drive system is superior over the conventional PI controller. The algorithm using the Fuzzy controller can improve a comfortable ride in the field of high performance 7-phase BLDC motor drive applications.

• Culinary science and hospitality research
• /
• v.8 no.2
• /
• pp.59-76
• /
• 2002

After 1990, Food service industry is growing up so fast and asking a lot of employee to be able to work this one. Our society will continue the growth of quantity and quality of food service industry with closing to the developed country and increasing the national income and leisure time. But our present culinary education system cannot gain the efficient of professional training to adopt food service industry without re-education and training. So, in our culinary education we have to be introduced new education system which is used effectively as a professional culinary education system in C.I.A. This system has merit to be able to teach step by step from basic to advanced course. Also Most of school system(management purchasing, human research, school life, etc.) is focused for culinary education. But, although this system has a lot of merits, it is too early toy us to adopt in our culinary education system. Because our education system has too much limited educational administrations of government and school for introducing new education system. The present educational situation is not enough to have facilities and financial support Finally, our culinary educational system have to change to right direction to improve in culinary education. Block system is one of the well-prepared system. But we need to administrational support of government and school to be able to adopted to our culinary educational system.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.2
• /
• pp.1-12
• /
• 2008

Automatic semiconductor manufacture system generating transaction from 50,000 to 500,000 per a second needs storage management system processing very large data at once. A lot of storage management systems are researched for storing very large data. Existing storage management system is typical DBMS on a disk. It is difficult that the DBMS on a disk processes the 500,000 number of insert transaction per a second. So, the DBMS on main memory appeared to use memory. But it is difficultthat very large data stores into the DBMS on a memory because of limited amount of memory. In this paper we propose storage management system using insert transaction of a block unit that can process insert transaction over 50,000 and store data on low storage cost. A transaction of a block unit can decrease cost for a log and index per each tuple as transforming a transaction of a tuple unit to a block unit. Besides, the proposed system come cost to decompress all block of data because the information of each field be loss. To solve the problems, the proposed system generates the index of each compressed block to prevent reducing speed for searching. The proposed system can store very large data generated in semiconductor system and reduce storage cost.

• Journal of Agricultural Extension & Community Development
• /
• v.19 no.2
• /
• pp.435-463
• /
• 2012

This study is a case study focusing on the residents' participation and satisfaction in the promotion of rural development projects under the Block Grants System in Buyeo. Along with changes in the way to support rural development projects, it requires the autonomy, responsibility, creative planning etc. in the municipal governments and the active participation of local residents for the effective development in rural areas. The purpose of this study is to suggest some policy implications by analyzing the relationship between the level of participation of local residents and residents' satisfaction in rural development projects. This study explained the background and characteristics of rural development projects under the Block Grants System, and also reviewed the theoretical literature on the residents' participation and satisfaction, including the survey of the local residents. For this study, we selected some variables, and then divided into the participating groups such as the resident representatives, the development committee and the local residents. Finally, using statistical method we analyzed the level of participation and satisfaction of the local residents in rural areas.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.328-334
• /
• 2014

This paper proposes an optical encryption and decryption system for OFB(Output Feedback Block) encryption algorithm. The proposed scheme uses a dual-encoding technique in order to implement optical XOR logic operation. Also, the proposed method provides more enhanced security strength than the conventional electronic OFB method due to the huge security key with 2-dimensional array. Finally, computer simulation results of encryption and decryption are shown to verify the proposed method, and hence the proposed method makes it possible to implement more effective and stronger optical block encryption system with high-speed performance and the benefits of parallelism.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.77-84
• /
• 2015

The purpose of this study was the analytical safety evaluation on the super-structure of precast modular bridge using standardized modular members and robotic construction during the transportation routing and lifting conditions. In order to evaluate the safety performance of the bridge system, 3-D full scale Finite Element (FE) of 40 m standardized modular block was developed in ABAQUS, followed by the analytical study to classify the structural system according to steel girder structures: 1) modular bridge block lifting method including the steel girder system; 2) modular bridge block lifting method without the steel girder system. The results from the analytical study revealed that the maximum stress of each modular member was within the maximum allowable stresses during lifting condition. However, the stress concentration at the connected area was more critical in comparison to the behavior of 40 m combined modular blocks during lifting time

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.800-805
• /
• 2009

This paper proposes the track system with twin block sleeper for a LIM type maglev railroad. Because a LIM type maglev railroad is expected to be constructed in inner city, social costs can be required under construction. Accordingly, superstructure using precast plate was adopted and twin block sleeper which can be constructed together with precast plate was developed to reduce the construction period. To examine the structural safety of the proposed track system with twin block sleeper, the finite element analyses and the laboratory experiments were performed. Also, the workability of the proposed track system was investigated through the construction simulation test and construction experience in test bed.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1365-1381
• /
• 2023

In this paper, a procedure for evaluating the structural integrity of the PCSG (Printed Circuit Steam Generator) unit block is presented with a simplified FE (finite element) analysis technique by applying the homogenization method. The homogenization method converts an inhomogeneous elastic body into a homogeneous elastic body with same mechanical behaviour. This method is effective when the inhomogeneous elastic body has repetitive microstructures, and thus the method was applied to the sheet assembly among the PCSG unit block components. From the method, the homogenized equivalent elastic constants of the sheet assembly were derived. The validity of the determined material properties was verified by comparing the mechanical behaviour with the reference model. Thermo-mechanical analysis was then performed to evaluate the structural integrity of the PCSG unit block, and it was found that the contact region between the steam header and the sheet assembly is a critical point where large bending stress occurs due to the temperature difference.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.19-28
• /
• 2004

Segmental Retaining Wall(SRW) has been variously applying in Civil and Architecture construction. Recently, the application of environmental element in all type's structures came to essential requirement, and the construction cases of retaining wall using reinforced soil and block are more increased than the past. But, this trend more widely was spread environmental element as landscape work for the backside of reinforced retaining wall as well as block itself. New environmental block, Greenstone Block, developed to apply of this tendency. The retaining wall system using Greenstone can be environmental constructing at both block itself and backside of retaining wall. The material tests, the axial compressive strength test of block and bending test of fiber-pipe, exercised to design and construction of vertical SRW, which were satisfied NCMA standard. Through this procedure, Rewall (ver 1.0) was developed, which can be automation design of SRW including internal stability, external stability and local stability. And these can be considered setback of retaining wall, as well the examples of vertical retaining wall using block presented to satisfying the follows; strength of reinforced geotextile, height of retaining wall, surcharge, types of backfill and groundwater level etc. Many problems investigated on after or before of construction were due to local failure, insufficiency of bearing capacity and groundwater level. Especially, the local failure was many occurred to during compaction or after construction, and the cases of SRW construction is similar to the results of model test on vertical SRW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.889-897
• /
• 2002

In this paper, we propose an improved block coding scheme for PAPR reduction in the OFDM communication system. Unlike the conventional block coding scheme which uses one block encoder of subcarrier N, two block encoders of subcarrier N/2 is used for the proposed block coding scheme. This not only improves the coding gain, but enhances the spectral efficiency by twice due to the increment of code rate. PAPR Reduction performance is the same as the conventional block coding. When BER is $10^{-4}$, the proposed block coding scheme has coding gain of 0.5 dB than the conventional scheme.