• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.25-35
• /
• 2008

The ridership and transit systems are influenced by the expansion of metro-rail in Seoul metropolitan area. However, it has been difficult to measure its precise quantitative influences. Also effective policy implementations have been limited due to the lack of practical evidences. Thus an empirical analysis for an operating metro-rail is essentially required. In this regard, this study examines the impact of the Jungang line on transportation system, whose metro-rail block has been recently started new service. The main interest of this study is to find out the changes of ridership and to forecast the ridership changes by the metro-rail service. The results indicate that the effect on auto users is less than that of bus users. The auto demand is decreased by 33.3% and the bus demand by 66.6%. Additionally, its influence on Gyeonggi-do bus was greater compared with that on the Seoul bus. From questionnaire survey, this results could be confirmed. To sum up, the metro-rail gives less influences on auto users, while it gives greater influences on bus users.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.578-584
• /
• 2013

Ice slurry that is a mixture of fine ice crystals and liquid water is a widely used working fluid in the ice thermal energy storage system due to its flowability and large latent heat of fusion. Generally ice slurry is made from supercooled water. But the excessive supercooling causes the water to freeze even worse to block the pipe. Additionally large degree of supercooling of water degrades the efficiency of the ice thermal energy storage system. Therefore the effective method to control the phase change from supercooled water to ice slurry is needed. In this paper we experimentally studied a novel method to generate the ice slurry from the supercooled water using the ultrasonic vibration. It was found that the cavitation impact of supercooled water by ultrasonic vibration can help the generation of ice slurry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.333-342
• /
• 2014

The pilot assisted channel frequency response (CFR) estimation schemes for an OFDM-based system with virtual subcarriers are analyzed under the assumption that pilot symbols are located according to a comb-type pattern in the OFDM block. In particular, as the minimum mean square error (MMSE) based scheme aiming to directly predict the channel impulse response and the MMSE based scheme aiming to suppress the leakage have not been clearly compared, by proving that the mean square errors (MSEs) of the latter scheme is always larger than that of the former scheme, this paper shows that the former scheme is superior to the latter scheme. Moreover, the impact of the number of pilots on the performances of the MMSE and least-square based channel estimation schemes are investigated. The performance analyses of the presented schemes are confirmed by computer simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.503-511
• /
• 2011

Water spray cooling is a significant technology for cooling of materials from high-temperature up to $900^{\circ}C$. The effects of cooling water temperature on spray cooling are mainly provided for hot steel plate cooling applications in this study. The heat flux measurements are introduced by a novel experimental technique that has a function of heat flux gauge in which test block assemblies are used to measure the heat flux distribution on the surface. The spray is produced by a fullcone nozzle and experiments are performed at fixed water impact density of G and fixed nozzle-totarget spacing. The results show that effects of water temperature on forced boiling heat transfer characteristics are presented for five different water temperatures between 5 to $45^{\circ}C$. The local heat flux curves and heat transfer coefficients are also provided to a benchmark data for the actual spray cooling of hot steel plate cooling applications.

• Journal of Computing Science and Engineering
• /
• v.5 no.2
• /
• pp.111-120
• /
• 2011

Data mining algorithms should exploit new hardware technologies to accelerate computations. Such goal is difficult to achieve in database management system (DBMS) due to its complex internal subsystems and because data mining numeric computations of large data sets are difficult to optimize. This paper explores taking advantage of existing multithreaded capabilities of multicore CPUs as well as caching in RAM memory to efficiently compute summaries of a large data set, a fundamental data mining problem. We introduce parallel algorithms working on multiple threads, which overcome the row aggregation processing bottleneck of accessing secondary storage, while maintaining linear time complexity with respect to data set size. Our proposal is based on a combination of table scans and parallel multithreaded processing among multiple cores in the CPU. We introduce several database-style and hardware-level optimizations: caching row blocks of the input table, managing available RAM memory, interleaving I/O and CPU processing, as well as tuning the number of working threads. We experimentally benchmark our algorithms with large data sets on a DBMS running on a computer with a multicore CPU. We show that our algorithms outperform existing DBMS mechanisms in computing aggregations of multidimensional data summaries, especially as dimensionality grows. Furthermore, we show that local memory allocation (RAM block size) does not have a significant impact when the thread management algorithm distributes the workload among a fixed number of threads. Our proposal is unique in the sense that we do not modify or require access to the DBMS source code, but instead, we extend the DBMS with analytic functionality by developing User-Defined Functions.

• The Korean Journal of Pain
• /
• v.31 no.3
• /
• pp.206-214
• /
• 2018

Background: Immune responses appear to be affected by anesthetics and analgesics. We investigated the effects of caudal tramadol on the postoperative immune response and pain management in pediatric patients. Methods: Sixty ASA-I pediatric patients aged 3-10 years undergoing lower abdominal surgery. Patients were randomly assigned either to a caudal bupivacaine (0.25%) group (group B), or a group that received caudal tramadol (1 mg/kg) added to the bupivacaine (0.25%) (group T). Both were diluted in a 0.9% NaCl solution to a total volume of 1ml/ kg. The systemic immune response was measured by collecting blood samples preoperatively, at the end of anesthesia, and at 24 and 72 hours postoperatively, and studied for interleukin IL-6, C-reactive proteins (CRP) cortisol levels, and leucocytes with its differential count. Postoperative pain was assessed along with sedation scales. Results: Postoperative production of IL-6 was significantly higher in group B at the end of anesthesia, than at the $24^{th}$ hour, and at the $72^{nd}$ hour in group B and group T, respectively. The immune response showed leukocytosis with increased percentages of neutrophil and monocytes, and a decreased lymphocyte response rate within both groups with no significant differences between the groups. Cortisol and CRP were significantly higher in group B. Conclusions: Adding tramadol to a caudal bupivacaine block can attenuate the pro-inflammatory cytokine response, Cortisol, and CRP in children undergoing lower abdominal surgery.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.447-454
• /
• 2014

In August, 2013, we collected epifaunal megabenthos using a deep sea camera (DSC) around a benthic impact study (BIS) site. This was located in the KR5 block of the Korea Deep Ocean Study (KODOS) area in the Northeastern Pacific. The DSC was positioned at $6.8{\pm}2.9m$ (SD) from the sea bottom and was operated from a position at $131^{\circ}56.85^{\prime}-131^{\circ}55.02^{\prime}W$ for 2.3 h at a speed of 1-2 knot. The geographical features of the study area consisted of two structures; a trough in the middle and hills at the east and west sides. Sediment conditions were consistent within six blocks and were affected by slope and polymetallic nodule deposits. We analyzed 226 megafaunal species. Sipunculida comprised the highest percentage of individuals (39%), and the dominant epifaunal megabenthos were Hormathiidae sp., Primnoidae sp., Hexactinellida sp., Hyphalaster inermis, Freyella benthophila, Paelopatides confundens, Psychropotes longicauda, and Peniagone leander. More than 80% of the total density of megafauna occurred on sea plain (D- and E-blocks). We found two distinct groups in the community, one located on sea plains and the other along both sides of the sea slop. Our results suggest that geographical features such as slope and polymetalic nodule deposits are important in controlling the distribution of the epifaunal megabenthos around the KODOS area.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.7
• /
• pp.47-57
• /
• 2014

In order to publicly notify the information security (Internet or Cyber) threat level, the security companies have developed the Threat Meters. As the physical security devices are getting more intelligent and can be monitored and managed through networks, we propose a physical security threat meter (PSTM) to determine the current threat level of physical security; that is a very similar compared with the one of information security. For this purpose, we investigate and prioritize the physical security events, and consider the impact of temporal correlation among multiple security events. We also present how to determine the threshold values of threat levels, and then propose a practical PSTM using the threshold based decision. In particular, we show that the proposed scheme is fully implementable through showing the block diagram in detail and the whole implementation processes with the access controller and CCTV+video analyzer system. Finally the simulation results show that the proposed PSTM works perfectly under some test scenarios.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.5
• /
• pp.346-350
• /
• 2014

PURPOSE. Impact forces in implant supported FDP (fixed dental prosthesis) are higher than that of tooth supported FDPs and the compositions used in frameworks also has a paramount role for biomechanical reasons. The aim of this study was to evaluate the flexural strength of two different zirconia frameworks. MATERIALS AND METHODS. Two implant abutments with 3.8 mm and 4.5 mm platform were used as premolar and molar. They were mounted vertically in an acrylic resin block. A model with steel retainers and removable abutments was fabricated by milling machine; and 10 FDP frameworks were fabricated for each Biodenta and Cercon systems. All samples were thermo-cycled for 2000 times in $5-55^{\circ}C$ temperature and embedded in $37^{\circ}C$ artificial saliva for one week. The flexural test was done by a rod with 2 mm ending diameter which was applied to the multi-electromechanical machine. The force was inserted until observing fracture. The collected data were analyzed with SPSS software ver.15, using Weibull modulus and independent t-test with the level of significance at ${\alpha}=.05$. RESULTS. The mean load bearing capacity values were higher in Biodenta but with no significant differences (P>.05). The Biodenta frameworks showed higher load bearing capacity ($F_0=1700$) than Cercon frameworks ($F_0=1520$) but the reliability (m) was higher in Cercon (m=7.5). CONCLUSION. There was no significant difference between flexural strengths of both zirconia based framework systems; and both Biodenta and Cercon systems are capable to withstand biting force (even parafunctions) in posterior implant-supported bridges with no significant differences.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1851-1857
• /
• 2014

Objective: The main purpose of this work was to investigate the effect of berberine hydrochloride (BH) on the proliferation, apoptosis, migration, and invasion of CNE-1 nasopharyngeal carcinoma cells. Our results shed light on the functional components of traditional Chinese herbs for potential use in modern medicine. Methods: The CNE-1 cell line was treated with different concentrations of BH and effects on cell viability and proliferation were evaluated using the Cell Counting Kit-8 (CCK-8) assay. Anti-migratory and anti-invasive actions of BH were investigated using wound healing assays and the Millicell Hanging cell culture insert system, respectively. Expression of the epithelial-mesenchymal transition (EMT)-related gene twist (Twist) was analyzed by real-time PCR and Western blotting. Apoptosis was estimated with an annexin-V fluorescein (FITC) apoptosis detection kit, as well as with reference to levels of activated caspase-3 of CNE-1 cells before and after treatment with BH utilizing fluorescence spectroscopy. Results: BH was capable of reducing proliferation and viability of CNE-1 cells in a dose- and time-dependent manner, also demonstrating anti-migratory and anti-invasive capacities which correlated with reduction in expression of Twist. Finally, BH was able to induce significant amounts of apoptosis in CNE-1 cells, as demonstrated by an increase in the activity of caspase-3 and in annexin-V staining following treatment. Conclusion: BH extracted from rhizoma coptidis demonstrated an ability to block proliferation, induce apoptosis, and impair the migration and invasion of the CNE-1 cell line Considering these properties, our results suggest that BH could be an important compound for consideration in the treatment of nasopharyngeal carcinoma.